Question about Acer AM1610-UD2180A DT E2180 2.0G 2GB 320GB DVDRW WVHP PC Desktop

1 Answer

Error code 31 4 to 6 network adapter

Error code 31 4 to 6 network adapter
on vista desktop
cable modem to ethernet jack connecting to network but no internet

Posted by on

  • 3 more comments 
  • router help Apr 17, 2009

    tried all of that unisntalled and re installed adapter/card modem does connect through laptop so cable modem working

    verified all aseetings with isp they claim ethernet card is the problem but it is not i can connect compute to computer with it

    tried ipconfig / release / renew but get error message no repsonse from dhcp server. after the reinstall the 6to4 adapter shows up only as hidden device now and no error in device manager but still won't connect

    beeter to get new card or try to wip clean and reinstall windows don't have disk though came pre installed

  • router help Apr 17, 2009

    it has to be something in the settings or registry that is screwing it up

    do you think one of those programs like regcure or something would fix it up

    or just give up and buy new card like isp said to do

  • router help Apr 20, 2009

    that is the message i get without the router just the cable modem i have removed the router entirerly and getting that

    dhcp message

  • Serbob May 11, 2010

    As per Eventid.net... enable port fast or edge port on the switch. Does that make a difference?

  • Anonymous Apr 01, 2014

    won't install drivers

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 227 Answers

Check these things:

  1. Is you Ethernet adapter Active
  2. Is your Cable the correct one (NOT a cross over)
  3. Refresh your IP Address for your Ethernet Card
  4. Reboot your computer and power down your modem, then power the modem up AFTER your windows is logged on
  5. Verify your modem "really" can connect, use another computer.
  6. Verify the are no network issues with your ISP

Posted on Apr 16, 2009

  • Arthur Hoffmann
    Arthur Hoffmann Apr 16, 2009

    Could you tell me Which or the soultions I provided helped solve your problem?

    and I am glad I could help!!! :)

  • Arthur Hoffmann
    Arthur Hoffmann Apr 17, 2009

    Well is you router set as the DHCP client?
    I would get into the router's web page and turn on DHCP? let me know if it was turned off. You can also have these problems if 2 devices on the same network are DHCP enabled, only ONE device can be DHCP enabled.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Won't connect to router


Shut down compter, unplug router and the ISP modem, Check ALL cables and reseat ALL connections, plug in the ISP modem allow it to selftest, plug in the router allow it to selftest. Reboot the computer, plug in Ethernet cable.You didn't give much info to work with. Wired? Wireless? Does it connect to other devices? What is the OS? Vista? Is this a recent issue? What it the router Make ,Model? Open the Network and Sharing Center, Manage Network Connections, Is the Ethernet Adapter enabled?

Jan 07, 2013 | eMachines ET1161-03 PC Desktop

1 Answer

We bought the AT&T Motorola DSL Modem today, and we're trying to connect to wireless on a laptop and the connection isn't showing up. How do we fix this ?


  1. Ensure that your AT&T DSL self-installation kit is complete. At minimum, it should contain a DSL modem, an AC adapter, an Ethernet cable, a telephone cable, several telephone filters and an installation CD.
  2. Install the telephone filters on each telephone jack that you have a phone plugged into. Install a dual phone adapter on the jack closest to your computer if you have an answering or fax machine, telephone or analog modem in the same room. Then plug your telephone equipment into the filters. Connect the telephone cable that was provided with your installation kit into an unfiltered telephone jack.
  3. Insert the installation CD into your CD-ROM drive. If the installation program does not start automatically, click Start > Run > and browse to the CD-ROM drive directory to find the installation file.
  4. Connect the telephone cable that is attached to the unfiltered wall jack to the back of the DSL modem. Connect the Ethernet cable to the back of the modem and to the Ethernet network interface card port on the back of your computer. Connect the AC adapter to the back of the modem and plug it into an electrical outlet. Power the modem on.
  5. Check the modem lights. There should be at least two lights lit. These will have labels such as "Power" and "Ethernet." However, these labels may differ depending on the model of modem you received in your installation kit.
  6. Complete the software installation. Enter your chosen username and password when prompted. Check your modem to see if the light labeled "DSL" or "Internet" is lit. Open a web browser window to see if your DSL service has been successfully installed.

Oct 25, 2010 | AT&T High Speed DSL Modem

1 Answer

We have just signed up for cable TV/high speed internet/cable telephone. The modem provided is an "Arris" version 1.5. The cable tech said I could connect my Belkin G router so that more than one computer...


Plug the ethernet net cord into the arris ethernet port. plug the other end into the router where it says "internet"

Plug a ethernet cable from one of the router ports to the computer.

First start up the arris modem, then power up the router, then start the computer.

Oct 22, 2009 | Belkin 802.11g Wireless Desktop Network...

1 Answer

Accer 1610 desktop running vista having problem connecting cable modem to ethernet adapter s1s191 device manager is giving caution triangle with ! getting error code 31 microsoft 6 to 4 driver when i try...


have you tried right clicking the local area connection and clicking diagnose and clicking reset the network adapter (local area connection) or try the other options if any pops up if it has a problem that might fix it

Apr 16, 2009 | Computers & Internet

1 Answer

Vista desktop won't connect to internet cable modem eithernet


power down cable modem, router, and computer. Connect ethernet cable from modem to router/ and connect ethernet cable from router to PC. Power up cable modem first, after modem shows connectivity, plug in router. After router shows internet connectivity, start computer. Be sure that you LAN card operable

Apr 15, 2009 | Acer Computers & Internet

1 Answer

Intel 82562V-2 10/100 ethernet adapter does not turn back on from vista sleep mode


If you're using your system as the Host for the other systems, turn off your sleep mode. The Host should be active at ALL times.

Dec 09, 2008 | Intel Ethernet 10/100 Network Adapter

1 Answer

Bought a new computer with vista instead of XP and cannot connect to internet via the ethernet line from my cable modem. what is the secret? Usually plugging it in is enough when I have moved or changed...


Yes! plugging it in on the Ethernet cable on the modem to the computer should get you online. If your not able to get online, you may want to check the following:

1. Make sure that the Ethernet adapter on the computer is enabled. If you can't find the Local Area Connection icon in your Network connections (control panel\network and sharing center), check if the network adapter is properly installed.

2. Some cable service providers require the MAC/Physical address of the Computer to get it online through the modem. If the old computer is working with the modem, you may want to contact your ISP and ask their assistance in getting you online using your new computer.

Aug 02, 2008 | Gateway Computers & Internet

1 Answer

Ethernet NIC card not seen in Network adapter (code 31)


Code 31 means that the device drivers are incorrectly installed.

In order to solve the issue fully, can you please tell me what Operating System you are using.

Jun 19, 2008 | Toshiba A205-S4577 Notebook

1 Answer

Speedstream 5100


The underlying Ethernet connectivity required for the broaband connection was not found. Please install and enable the Ethernet adapter on your computer via the Network Connections folder before attempting this connection.

If u don know to install the ethernet adapter pls do contact your vendor

Jan 21, 2008 | Efficient Networks SpeedStream 5100 Modem

Not finding what you are looking for?

Open Questions:

See all Acer AM1610-UD2180A DT E2180 2.0G 2GB 320GB DVDRW Questions

Acer AM1610-UD2180A DT E2180 2.0G 2GB 320GB DVDRW WVHP PC Desktop Logo

Related Topics:

1,183 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acer Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18392 Answers

Mohammed Ebrahim M
Mohammed Ebrahim M

Level 3 Expert

633 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Are you an Acer Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...