Question about Computers & Internet

1 Answer

Usb orsome kind of iscsi initiator code wrong &roung image file?? May B

Whont find drivers that work for my scanner's on my vists home premium on any of my scanners even after i bought that Stupid paretologic drivers (hard) software NoT Made for my machine both are old but never been out'a box have all soft ware they came with Mem48u 48 bit scanner or visioneer onetouch 5800 usb and computer saids that thire both xeox 4800 and can't find drivers

Posted by on

  • kirkregan Apr 17, 2009

    I Am trying too hook up any one of my scanners .,(mem48u usb,Visioneer OT.5800 usb). to my new comp. ,,even bought a full version of paretologic "drivecure" NOT!! did not work on my version win.Visa.Home PreM. Operating system on my H.P Pavilion Elite M9350F PC (AMD PHENOMx4 9850 Q-Core Prosser) . it doesn't recknize any of them 4 what they are they semem to load the soft ware .,,.. but never lets them work (sometimes Devise Manarger yellow flags'em as Genearic no drv'ers or sometimes lables them as Xereox with nodrivers ). ..i'Ve even try & of corse just down loaded the software that came with it when i first got them still in factry boxes they had never been used write ??? loaded throught the kinda dos mode to hard drive .,,did not fide software (the arignal dic) nor did it wrechnize paretologic .??? it did say it was the right software for the job but not for My comp. i'Ve gone drictly to HP. (not helped) try to down from the fix drictly win-DOW's got some thing that down loaded too comp. still no home runn went to (visioneer down loaded Abdouby something ) .,,.NoT went 2 memorex HA (that was real fun ) JOKE thire 2 strike 6 ( i can't beleave iT's this hard DAMM iT's just a software PROB. ) thaire still made the same to day ????. i found U And Hoped Thaire was a light in some Ones Head B Cuz i Haven'T seen One any where ells from the people houm should know something **** they DON"t have A CLUE or the time or patch or what ever to vigurout and the thaires are those era messg. that win. keeps trying to say that is the problem. (one saids iscsi initiator ,LONG string of no.&leters EXE..comand ) or a diffrent (The Image file C:\string no.&letters and EXE.... comand but not 4 my comp. ?? go figure?? (That iT in a nutt shell ) Thank's lionel regan ...kirkregan@rock.com

  • Mike  Petrowsky
    Mike Petrowsky May 11, 2010

    What? I cannot make out what you are trying to say.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 210 Answers

I ASSUME THAT THE VISIONEER SCANNER I THE DRIVER IS FOR 98 OR ME YOU HAVE TO GO TO VISIONEER WEB SITE AND DOWNLOAD THE CURRENT DRIVER FOR THAT MODEL. I HAVE THE SAME SCANNER ONETOUCH VISIONEER SCANNER AND IT WORK TO MY COMPUTER. ALSO i AM USING PAPERPORT SOFTWARE. I HOPE THIS WILL HELP YOU TO SOVE THE PROBLEM.

Posted on Aug 12, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ethernet controller and Universal Serial Bus (USB) Controller - The drivers for this device are not installed. (Code 28) What do I need this for, what can't I do or what goes wrong by not having these...


An Ethernet controller is a computer processing device used to handle network communications, and Universal Serial Bus (USB)
It can be used to connect keyboards, mice, game controllers, printers, scanners, digital cameras, and removable media drives, just to name, so i think you need booth device...install the 2 device? nothing it is goon to happen to your computer..

Sep 15, 2013 | Microsoft Windows 7 Home Premium Operating...

1 Answer

Can Vista Home Premium recognize Vupoint PDS-ST415-VP? If not, is there a driver that can be loaded to make it work?


When I display my images on my computer, the images are black. I can't see the picture. What's wrong. I've installed the SD card and formated it several times. i've followed the instructions see several times. Should there be light when it scans like other scanners?

Dec 04, 2010 | VuPoint PDSST410VP

2 Answers

Vista insists on formatting any memory card I use


you must check your device manger in your computer and look there device microsoft iSCSi initiator if your not found in your device manager in your computer system you must update this device microsoft iSCSi initiator includ to your system computer. good luck

Apr 24, 2010 | Microsoft Windows Vista Home Premium...

1 Answer

Need drivers for Minolta Dimage Scan Dual III to work with Windows 7 64-bits


I used this solution from KainAnderson
1) Install the Konica Minolta XP software in Win 7.
2) Plug in your DImage Scanner into a USB port and turn it on with the door closed. It may detect and install the original Konica Minolta Driver.
3) Create an empty folder on you harddrive (for instance go to my computer, double click on the c: drive, then right click and create a new folder named newminolta).
4) Open windows notepad and copy the following into it:

; scanners.inf -- Test Vista Minolta Film Drivers
;
;
; To remove this driver and install the original
; manufacturer's driver, go into Device Manager,
; open Imaging devices, then click on the scanner name
; with the right mouse button and choose Uninstall.
[Version]
Signature="$CHICAGO$"
Class=Image
ClassGUID={6bdd1fc6-810f-11d0-bec7-08002be2092f}
Provider=%Provider%
DriverVer=3/12/2009,2.0
[Manufacturer]
%Mfg%=Models,ntamd64
[Models]
; USB scanners
"Minolta Scan Dual II" = USBScanner,USB\Vid_0638&Pid_026a
"Minolta Scan Dual III" = USBScanner,USB\Vid_0686&Pid_400d
"Minolta Scan Dual IV" = USBScanner,USB\Vid_132b&Pid_000a
"Minolta Scan Elite 5400 2" = USBScanner,USB\Vid_132b&Pid_0012
"Minolta Scan Elite 5400" = USBScanner,USB\Vid_0686&Pid_400e
"Minolta Scan Elite II" = USBScanner,USB\Vid_0686&Pid_4004
"Minolta SC-110" = USBScanner,USB\Vid_0638&Pid_0a15
"Minolta SC-215" = USBScanner,USB\Vid_0638&Pid_0a16
;---------------- Duplicated from [Models]
[Models.ntamd64]
; USB scanners
"Minolta Scan Dual II" = USBScanner,USB\Vid_0638&Pid_026a
"Minolta Scan Dual III" = USBScanner,USB\Vid_0686&Pid_400d
"Minolta Scan Dual IV" = USBScanner,USB\Vid_132b&Pid_000a
"Minolta Scan Elite 5400 2" = USBScanner,USB\Vid_132b&Pid_0012
"Minolta Scan Elite 5400" = USBScanner,USB\Vid_0686&Pid_400e
"Minolta Scan Elite II" = USBScanner,USB\Vid_0686&Pid_4004
"Minolta SC-110" = USBScanner,USB\Vid_0638&Pid_0a15
"Minolta SC-215" = USBScanner,USB\Vid_0638&Pid_0a16
;---------------- USBScanner -------------------------
[USBScanner]
Include=sti.inf
Needs=STI.USBSection
SubClass=StillImage
DeviceType=1
DeviceSubType=1
Capabilities=0
[USBScanner.Services]
Include=sti.inf
Needs=STI.USBSection.Services
[Strings]
Provider="Konica Minolta"
Mfg="Konica Minolta"

5. Now save you new notepad file in the directory you created as newminolta.inf NOT as newminolta.inf.txt or newminolta.txt (i.e. c:\newminolta\newminolta.inf)
6. Go to control panel (View Devices and Printers).
7. Right click on Minolta Scan Dual III and click on properties.8. Select Hardware tab, then select Properties
9. Select Driver tab, then select update driver
10. Select Browse my computer for driver software.
11. Browse to c:\newminolta\newminolta.inf (or wherever you stored file) and click Next
12. Click Next. After running driver file Win 7 should now say it updated driver.
13. Run Dimage software with door closed. Wait for it to initialize and green light stops blinking.
14 Open door and insert film holder and start scanning.
Hopefully I've copied and amended the solution correctly

Feb 10, 2010 | Minolta Dimage Scan Dual III Film Scanner

1 Answer

Are there drivers available for a 5300c to be used with viste home premium 64 bit?


Give this a whirl, works great...
http://www.pixel2life.com/publish/tutorials/399/how_to_get_your_hp_scanjet_5300c_working_in_windows_vista/

Sep 26, 2009 | HP ScanJet 5300C Flatbed Scanner

1 Answer

Hi, i have Gemini USB 2.0 TV tuner card, i have a Vista Home Premium OS, but when even i try to open Win PVR the system crashes with bluescreen. Can you please confirm if there are any VISTS compatabile...


hey

I have the same problem and found the solution in installing another tv tunersoftware such as sagetv.

I need your help. I lost the drivers cd. can you provide me with the driver?

keep in touch through 124.vivek@gmail.com

Apr 14, 2009 | Televison & Video

1 Answer

Code: 31, 0, 0


met same problem. after a lot of trials, finally got rid of the Code 31,0,0 thingy.


went to:
http://www.usa.canon.com/cusa/support/consumer/scanners/canoscan_series/canoscan_lide25#DriversAndSoftware


<from Software>
1. downloaded the - Driver uninstall utility
-unplugged the usb cable and run the - Driver uninstall utility


<from Drivers>
2. downloaded the - Twain Drivers
-installed the Drivers with usb cable still unplugged


3. plug and scan

Feb 09, 2009 | Canon CanoScan LiDE 25 Flatbed Scanner

10 Answers

Minolta Dimage Scan Elite 5400 - Vista driver?


1) Install all of the usual Minolta software in Vista if you haven't already.
2) Create a new folder somewhere
3) Create a new txt file in that folder and name it minolta.inf and paste this into it:

; minolta.inf -- Test Vista Minolta Film Drivers
;
;
; To remove this driver and install the original
; manufacturer's driver, go into Device Manager,
; open Imaging devices, then click on the scanner name
; with the right mouse button and choose Uninstall.
[Version]
Signature="$CHICAGO$"
Class=Image
ClassGUID={6bdd1fc6-810f-11d0-bec7-08002be2092f}
Provider=%Provider%
DriverVer=3/12/2009,2.0
[Manufacturer]
%Mfg%=Models,ntamd64
[Models]
; USB scanners
"Minolta Scan Dual II" = USBScanner,USB\Vid_0638&Pid_026a
"Minolta Scan Dual III" = USBScanner,USB\Vid_0686&Pid_400d
"Minolta Scan Dual IV" = USBScanner,USB\Vid_132b&Pid_000a
"Minolta Scan Elite 5400 2" = USBScanner,USB\Vid_132b&Pid_0012
"Minolta Scan Elite 5400" = USBScanner,USB\Vid_0686&Pid_400e
"Minolta Scan Elite II" = USBScanner,USB\Vid_0686&Pid_4004
"Minolta SC-110" = USBScanner,USB\Vid_0638&Pid_0a15
"Minolta SC-215" = USBScanner,USB\Vid_0638&Pid_0a16
;---------------- Duplicated from [Models]
[Models.ntamd64]
; USB scanners
"Minolta Scan Dual II" = USBScanner,USB\Vid_0638&Pid_026a
"Minolta Scan Dual III" = USBScanner,USB\Vid_0686&Pid_400d
"Minolta Scan Dual IV" = USBScanner,USB\Vid_132b&Pid_000a
"Minolta Scan Elite 5400 2" = USBScanner,USB\Vid_132b&Pid_0012
"Minolta Scan Elite 5400" = USBScanner,USB\Vid_0686&Pid_400e
"Minolta Scan Elite II" = USBScanner,USB\Vid_0686&Pid_4004
"Minolta SC-110" = USBScanner,USB\Vid_0638&Pid_0a15
"Minolta SC-215" = USBScanner,USB\Vid_0638&Pid_0a16
;---------------- USBScanner -------------------------
[USBScanner]
Include=sti.inf
Needs=STI.USBSection
SubClass=StillImage
DeviceType=1
DeviceSubType=1
Capabilities=0
[USBScanner.Services]
Include=sti.inf
Needs=STI.USBSection.Services
[Strings]
Provider="Konica Minolta"
Mfg="Konica Minolta"

4. Save file. Turn on scanner and go into device manager and update the old minolta driver with this driver. You may have to manually update it.
5. Once installed, all the normal Minolta programs now work just fine. Enjoy!

I tested this on Vista 32 Ultimate with a Dimage IV but it should work on all the models listed in the .inf file.

Aug 02, 2008 | Minolta Dimage Scan Elite 5400 Film...

1 Answer

Umax Astra 6700 download driver error code 129


here is your code mines






101: EXPOSURE LAMP PROBLEM
120:SCANNER HOME PROBLEM
121:SCANNER HOME
124:SCANNER MOTOR PROBLEM
125:SCANNER MOTOR PROBLEM
126:SCANNER MOTOR PROBLEM
127:SCANNER MOTOR PROBLEM
129:SCANNER MOTOR PROBLEM
130:SICU / SBU PROBLEMS
300:CHARGE CORONA PROBLEMS
301:CHARGE CORONA PROBLEM
303:CHARGE GRID PROBLEM
304:CHARGE GRID PROBLEM
305:CHARGER UNIT WIRE CLEANER PROBLEM
306:CHARGER UNIT WIRE CLEANER PROBLEM
310-316:DRUM POTENTIAL SENSOR ERROR ISSUES
321:LASER UNIT WRITE PROBLEM
322:LASER UNIT 1 SYNCH. PROBLEM
323:LASER UNIT DRIVE PROBLEM
335-338:POLYGON MOTOR PROBLEMS
340-342:TONER DENSITY SENSOR ERROR ISSUES
345:DEVELOPER BIAS PROBLEM
350-355:IMAGE DENSITY SENSOR PROBLEMS
360:HARD DISK 1 PROBLEM
361:HARD DISK 2 PROBLEM
362:HARD DISK 1 PROBLEM
363:HARD DISK 2 PROBLEM
364:HARD DISK 1 PROBLEM
365:HARD DISK 2 PROBLEM
366:HARD DISK 1 PROBLEM
367:HARD DISK 2 PROBLEM
370-375:IMAGE COMPRESSION ERROR
376-377: SICU,IMAGE COMPRESSION ERROR
380-383:IMAGE DATA TRANSFER PROBLEM(SICU, SBU,PRINT CONTROLLER

Jul 01, 2008 | Umax Astra 6700 Flatbed Scanner

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...