I have Panasonic PV-G35 Camcorder. When I

Your device has the option buttons on which to select recording by observing the process from the user observation scopes. One option only could be observed at the recording session. On the other hand, disabling the option of observing a recording session on the scope lense automatically displays the recording session on the visible lense LCD screen area.

Manipulating the Camcorder is from the option buttons located along the sides of the camera. A switch on the menu area should make that experiece achievable.

It does look as if your LCD screen is dead, they are not cheap to replace, but you could pop it in to your local Camera shop, they will mostly be glad to help you.

LCD cable is damage so that lcd is white it need to replace

f PCB broken of LCD replace

first check the LCD connection, try to reconnect the flexible cables on the LCD board,
second, replace the flexible cable goes throungh hinge.
if those won't work, you may need to replace the LCD or main board.

I had the same issue. screen it was white when it was opened.
the wire ribbon which connects the LCD with the rest of the camera it's broken. I ordered a new part(it comes with the whole mechanism), replaced it and it's working like new. it was around $72 and if I remember it was from partstore.com. unfortunately I don't remember the part# or name but it could be a shaft or lcd shaft.

send the camera in for repairs.
the connection between the lcd,and the camera body is bad.

The panasonic camcorder does not use the Sony CCD element. If the small viewfinder is showing the camera video, there's nothing wrong with the CCD imager. We have had numerous problems with the switch that controls the activation of the large LCD and the backlight inverter that powers it. When you open the LCD the small viewfinder should power down to conserve battery power. The large LCD should then illuminate, if not, shine a flashlight at the surface of the LCD and notice if the video is present, if so, the backlight or LCD harness is defective. Joe Weibel Custom Electronics (customelectronics.org)

Check LCD ribbon cable. 99% LCD ribbon cable is defective. Replace LCD ribbon cable.

Important Notice
Digital 3CCD Camcorder


Panasonic has discovered a premature component failure with a limited number of PV-DV953 (2003 Model) and PV-GS200 (2004 Model) 3CCD camcorders, which may cause an abnormal camera picture (incorrect color reproduction, reddish, noisy image, etc). This anomaly is limited to a specific range of serial numbers listed below.

If your camcorder demonstrates the specific symptom and falls within the serial number range, Panasonic will repair the camcorder free of charge.

Please call the following toll-free number for assistance in receiving a free repair:

Panasonic Call Center: 1-800-973-4264


Model # Serial Number Ranges

PV-DV953 (2003) E3Hxxxxxx, F3Hxxxxxx, G3Hxxxxxx, H3Hxxxxxx, I3Hxxxxxx, J3Hxxxxxx, K3Hxxxxxx, L3Hxxxxxx and A4Hxxxxxx
PV-GS200 (2004) C4Hxxxxxx and D4Hxxxxxx