Question about Cameras

1 Answer

My camera is conected with a cable but when i turn it on my computer screen goes black and a lot of words come up as big as the computer screen then my computer restarts it self.can you tell me the problem as i can not ues my camera this as not appened before.many thanks

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cameras Master
  • 4,738 Answers

It's very hard to troubleshoot software problems online, and it likely is a software issue. But why put up with the headaches of bad software in the first place? Please see the following blog article, as it describes the use of a card reader as a much easier, faster, and less error prone way to download your photos. In fact there are several important reasons discussed in the article for using a card reader vice downloading from the camera. USB Card readers are also very inexpensive these day, with cost virtually not an issue:

http://camerarepair.blogspot.com/2009/01/how-do-i-download-photos-or-pictures.html

Posted on Apr 18, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kodak easyshare m583


I have never seen a camera where the display actually contains the words 'blah blah blah' . Are you sure that you have read them correctly ?

Oct 07, 2017 | Kodak EasyShare M530 Digital Camera

1 Answer

The monitor will go into sleep mode, and when first booted up will not register anything and goes to sleep. Have tried re-booting, checking the chords, plugging and unplugging them in. To no avail it...


No pc stated just monitor. (not even desktop or laptop) stated.
no OS stated, ether.
so ill answer in wide generic ways....
all computer are a problem, since days of Mr. Allen Turning to now.
ive done 43years of them just puters.(and other big systems MIL)
no person on earth can answer that common question
gee no pc stated,! nor can we lay blame until its fixed can we. ever.

3+billions of transistors. mine here typing now.
4,800,000,000, and friends, lots of other things to fail even LCD
its not a toaster or 4 banger calculator, at all.
its COMPLEX but 1 of those 2 boxs or cable are bad. sure.
(viewed in the MACRO)

sleep? how do you know it is sleep.
the screen showed that. text said SPEEP?
is the screen totally dead. (that is not sleep if true)
is the screens OSD button dead?,
the only clue i have here is one word, REGISTER (good word just too few)
so the screen never ever shows any text or HP logo ever
booting with monitor on for 5min. power on PC, see words?
no text ever...so.

then push the monitors.
Select menu buttons on front of monitors. and the OSD pops does it , it must....!!! see image below (mine is Viewsonic, near new)

there are many simple tests here.
  • try you monitor on any other PC
  • or try you pc on any other monitor
easy no.?, just 1 or 2 tests and bam, who's bad.
called the process of elimination..
but OSD is first. no matter what,.

if the screen tests ok,, (display tests and its buttons)
then the PC is problematic, (1/2 the battle won)
the first thing to do (tell me what pC) but turn off all sleep
modes in the CONTROL PANEL + POWER SETTINGS>
do that first. if you can even get the screen to work.

A pc never boots to sleep so.....
the PC can have 2 VGA jacks on the rear.
the PC can have DVI jacks, using those are you
try them all yet?
if you test the PC and it works and the screen works the cable is bad.


omg that screen is new, its even sold now at walmart.
not cheap either, too much, kinda
this is a modern 22" screen, LED>
and do not just go bad, is the power pack there and correct?
if the OSD screen is dead, check power first.

this is the Monitors brain, it works even with the PC dead.


the button is marked menu or select. this is test1.
osd-1z31dkbg41o2owghj0fas5br-1-0.jpg on my monitor ,heck all 2004 up
it tells you SLeep mode when the PC goes to sleep mode
or shows Power saver mode. live on the screen.
screen power on first sure.

all ways to go black done here.
http://pcdied.com/black-screen.html

Jul 20, 2017 | HP w2207 Monitor

1 Answer

My compaq computer turns on and then it goes to a black screen for a couple seconds, then it says : 'dsk boot failure, inster disk,then press enter' What disk ?!?


DISCONECT AND CONECT YOUR HARD DRIVE IT WORKS SOME TIMES MY BE CONECTOR CABLE ARE MISS IF NOT MAY BE YOUR HARD DRIVE ARE BAD.

Nov 23, 2010 | Computers & Internet

1 Answer

Dell Dimension 4700 desktop. Turn computer on, go...


try to disconnect, stretch the master cable of Hard drive and then connect it.

May 20, 2010 | Dell Dimension 4700 PC Desktop

2 Answers

Hello


you will need a VGA cable it look like the lead that conects it your monitor but has two conections on it one goes to computer and if tv has PC socket on it put in tv

Nov 28, 2009 | Televison & Video

1 Answer

BLACK SCREEN


Probably dead CCD or loose conection between CCD and main board. You can remove the back cover and check the CCD connection (on the left side big flex cable) or contact your local Kodak service center or me at toms.safranovs@gmail.com
I work in a Kodak service center.

Tom

Jul 26, 2009 | Kodak Easyshare C813 Digital Camera

1 Answer

Sony Cybershot S700 black screen when USB cable is inserted.


try going into the menu and doing a camera reset this corrects alot of connection issues. hope this helps.

Mar 02, 2008 | Sony Cybershot S650 Digital Camera

1 Answer

The lens keep retracting everytime I turn on my camera...


Maybe the battery is low OR your press the button the turns the camera into the on you have to manual look through. The button should be at th e top left it looks like a screen, when pressed like 4 times the screen goes black. I'm not a expert but maybe this will help

Mar 01, 2008 | Kodak EasyShare C653 Digital Camera

2 Answers

URGENT Big project due...Monitor won't stay on...light goes yellow after initial message c below


check the cable which connects from the monitor to cpu is connected properly... if it s not connected properly this problem occurs.. just reconnect it ... ur problem will be solved...

Dec 03, 2007 | Sony SDM-HS73P 17" LCD Monitor

1 Answer

Razr- turning on camera makes screen turn black but keypad stays lit


the easiest thing tpo do here is take it to a professional but if you want to try updating your software off the Motorola website. (this require a data cable or bluetooth in your computer) This fixes a lot of software problems with the razor. If this doesn't work then you will have to reflash your Firmware which is like the Windows Xp of the phone. This does require a professional as it can destroy the phone

Jul 05, 2007 | Motorola Mobility RAZR V3

Not finding what you are looking for?
Cameras Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cameras Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

yadayada
yadayada

Level 3 Expert

79865 Answers

Brad Brown

Level 3 Expert

17167 Answers

Are you a Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...