- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Marion, Check the attached links,instruction and guides to program direct TV remote. Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
i have an ARIO TV 32" and I used common code 10019-10178-10030-10835 to program my direct tv remote. anything is working , but only channel is not woking ,please can they help me out , how i program channel
SOunds like the remote needs to be reprogrammed with codes to work for both. They would operate on two different codes. Need to look at the remote device to see what codes are recommended in the setup.Universal remotes have their own codes that don't always work on other remotes too. Also take into consideration, does the remote go to the tv you are trying to control or are you using a different remote, trying to control your different units from the same remote. Comcast, Tivo, Directv, etc all come with their own remotes that can be programmed to operate more than one device, similar to that of a universal remote.
Google "program your remote for a tv" to get different results. You may need to google the model # of your remote too to see how to program it properly.
"This TV utilizes new remote control signal codes and may not be compatible with your existing universal remote (e.g. satellite box remotes, cable box remotes, generic universal remotes, etc.). Over time, newer universal remote controls that become available should pick up the new TV codes."
the remote control code for DirecTV with Olevia 242T or 237T (37' or
42') model is 11610. this code will power on/off and volume up/down the
buttons on directv remote.
Or buy the Olevia RC-LRN remote control. go to olevia.com - accessories - remotes.
if you have gone through all of the programming codes; you will just have to use the remote that came with the TV set. there is no way to program more codes into the remote, due to its list of codes it was made with can not be updated. i hope this helps
I just programmed my comcast remote today and the codes in the manual work fine. I was lucky, the first one as the one I needed. Good luck.
11454, 10054, 10030, 10706, 10187, 10386,10802,11198,11254,11963,11990.