Question about Toshiba e-Studio 205 Copier

2 Answers

Canon ir 400s

The control panel don´t work?

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 40 Answers

...if you can open the back of the control panel pcb....then try to cleaning the control panel and all the buttons/keys with the cleaning penetration fluid (like the WD40) while you push the buttons or keys several times (the purpose of doing this is to make the dirts out from the buttons/keys) but don't forget to wipe it until dry....and checks the cables from the control panel pcb to the the machine....if problem persists....maybe the microswitchs (button/keys) broken or there any cable loose (broken wire)......contact the technician.....

Posted on Feb 09, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 62 Answers

Try cleaning the control panel and all the buttons/keys. If problem persists, try banging the keys individually. The control panel will not respond if any of the keys are stuck down.

Posted on Sep 15, 2007

  • Bleddyn Jones Oct 06, 2007

    START key microswitch short-circuit?

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My Canon copier, Model IR 400s, Shows the error code : E 604. What is the problem ? How can I Solve it ?


Problem :
E604 Error Code. You followed all the troubleshooting steps in the service manual and still have an E604 code.



Solution :
Check the Image Server Memory or the Image Processor PCB. The recommended Image Sever Memory should be Kingston 32MB, 144 pin EDO Module, 64 Bit, 60 nanoseconds, No Parity.

Jul 13, 2012 | Canon imageRUNNER 400S Copier

1 Answer

Machine canon ir 400s error E051


hi sir my xerox machine IR 400 the error code e220

May 12, 2012 | Canon imageRUNNER 400S Copier

4 Answers

My Canon copier, Model IR 400s, Shows the error code : E 604. What is the problem ? How can I Solve it ?


My Canon copier, model IR 400s, Shows the error code : E604. What is the problem? How can I solve it ?

Sep 25, 2010 | Canon imageRUNNER 400S Copier

3 Answers

Plz send me (detail) feachar of cannon 6050 & cannon 400s on this address CHECHANI TELECOM & PHOTO COPIERS C-278, R.K.COLONY,NEAR CHOTI PULIYA, BHILWARA,(RAJ)311001 +919829045797 +919413824797


CANON IR 6050 IS AN ANALOG COPIER.
CANON IR 400 IS A DIGITAL COPIER.IR 400 IS SINGLE SCAN & MULTI PRINTS ,STACKLESS DUPLEX & ITS CAN BE USE PRINTER & FAX ALSO.

FOR MORE DETAILS VISIT WWW.CANON.COM

Mar 15, 2009 | Canon imageRUNNER 400S Copier

1 Answer

How to remove 4 cassette unit from canon machine IR 400


THIS WILL BE SOFTWARE SETTING ON THE CONTROL PANAL

CANON IMAGE RUNNER 400S COPIER USERS GUIDE
OR
CANON RUNNER 400S SERVICE MANAUL DRIVERS
OR
WWW.CANONUSA.COM/COPIERS

ROD

Feb 09, 2009 | Canon imageRUNNER 400S Copier

3 Answers

Canon Copier Key Panel Problem


Replace display touch control panel

Deshpande +919420906982

Oct 19, 2008 | Canon imageRUNNER 400S Copier

1 Answer

Canon ir 400


There were 2 Printer controllers for that machine both made by Fiery. The H1-K1 and the P1-R1. Which controller do you have?

Oct 18, 2008 | Canon imageRUNNER 400S Copier

3 Answers

Canon IR 400s serial number instalation


Do you have the Fiery Print controller with the printer ports on the rear left of the machine? The link for the driver is at www.usa.canon.com. Find office products>iR330/400 and the PCL drivers are there.

Aug 22, 2008 | Canon imageRUNNER 400S Copier

3 Answers

Canon IR 400s


for service manuals search in the following web site

www.TechMediaCD.com

Jun 16, 2008 | Canon imageRUNNER 400S Copier

Not finding what you are looking for?
Toshiba e-Studio 205 Copier Logo

Related Topics:

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Office Equipment & Supplies Experts

didi2005

Level 3 Expert

727 Answers

jasbo
jasbo

Level 3 Expert

2239 Answers

digivisionm

Level 1 Expert

40 Answers

Are you a Toshiba Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...