TOC Error I hit a bump and my cd player skipped and now all my cd's say TOC error when i try to play them

The laser in the cd player may be dirty or has gone bad and can no longer read the disc.

Without a decent Table Of Contents, your MiniDisc will NOT work, as you've found out. Does it matter what brand of MD you use? I would record it at "1X" and NOT 4x speed too. Try erasing a blank minidisc first and then shut off the unit and then turn it back on and see if the TOC works. Try adding a title, then turn it off and back on. Then try the CD to MD.

You can visit this link to check it this error out.

toc error C14

Best regards.

The TOC error is the same error seen on computer disks, TOC is the table of content, this has to be read before the the unit will know the details of tracks etc......

If every disk inserted (not just burned discs) has this error, the laser is faulty or out of alignment. Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.

mine too can anyone help?what did u do

hi TOC error sounds like its the laser is faulty. you could try a cd cleaning disc. this may cure the problem..


Regards

Mark
www.blueice-electronics.co.uk

toc error means "table of contents" error... means the player is unable to read the disc at all. May have a dirty focal lense to laser. clean gently with some windex on a cotton wool bud. It may be a faulty spindle motor that spins the disc. the bearings get worn or uneven and do not allow for disc reading to be successful. a check for this is a drop of oil to the bearing. It may then start to read discs, but will still require the motor to be replaced. . Check for the above... but if there is more required, take it to a Kenwood 'Agent... it may need a laser change

Unit displays TOC error when I inserted two new cds I purchased.

TOC is table of contents. Typically if its on a recorded cd try burning a cd from antoher computer and try it, if it works its most likely that your burner or software or ccd's your using are bad. Also is it a MP3 disc your trying to play? If so then you MUST burn it as a MP3 cd. You cant just burn MP3's to a CD and it read them. If this is the case thats why you are getting the TOC error because its not writing to the CD whats on the CD on the TOC area of the disc.

Is it anti-skip resistance? If not some players have hard problems playing when heavy bumps. Also is it installed correctly? Was all shipping plugs taken out?