Question about RCA F27442 27" TV

2 Answers

No picture has sound, then picture comes on after a while

The problem started with the picture not coming on when the TV was first turned on. Then you could hear the tube power up and the picture would come on. The sound works fien alwats. Lately the picture stays off no matter how long the TV is on.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 1,694 Answers
Re: No picture has sound, then picture comes on after a...

Solder both leads of small coil in horiz driver circuit near center
of circuit board..............T.

Posted on Jan 08, 2008

  • Level 1:

    An expert who has achieved level 1.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers
Re: No picture has sound, then picture comes on after a...

Check for a problem with the horiz.output circuit. maybe bad solder connections or the horiz.osc.

Posted on Jan 08, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Got sound but no picture

We Start tv Then Sound come But Picture Is Not come

Aug 22, 2009 | RCA F27442 27" TV

1 Answer

Will not come on it only a clicking sound from part no. 0mron 0584H3

I had the same problem with my tv, same make and model. I first continuously turn on and off my tv manually until I could get some kind of picture. This procedure took maybe five minutes. I was able to get a fine picture and sound, as if it was brand new! Other things to keep in mind, try to eliminate dust build up as much as possible.. Hope this helps out...

May 21, 2009 | Philips Magnavox 27MS343S 27" TV

1 Answer

Our TV started taking longer to turn on and then sound will come

may be bad cap take to tv shop good luck
have to have esr meter to check

Apr 28, 2009 | RCA Standard (CRT) Televisions

1 Answer

Picture wont come on screen

this problem is in the power supply.the red lights indicate as the standby mode.

Jan 23, 2009 | Sony FD Trinitron WEGA KV-36FS120 36" TV

1 Answer

TV Picture No Longer Comes On

Sounds like one or multiple Reservoir Capacitors in the Power Supply were starting to dry up. You also get problems like this from dry joints in the Power Supply. You need a technician to take a look for certain.

Jun 09, 2008 | Philips 27PT543S 27" TV

1 Answer


I suspect you crt tube is going and is most likely not worth fixing

There are things you could do a tv service shop could rejuve your picture tube and adjust your screen voltage.

sometimes that does not work

I would start looking for another tv

thanks doctor video

Apr 14, 2008 | Sony FD Trinitron WEGA KV-36XBR800 36" TV

1 Answer

Samsung t.v. picture going in and out

it may sound like you have a input or a output problem if you have a video un plug it from the tv. and put your Aral strait to your tv that will tell you if your video is the problem not the tv.

Jan 07, 2008 | Samsung DLP HL-P5663W 56" TV

1 Answer


If the sound on your DLP TV is out of sync with your picture and the TV is not connected to a home theater system, a Samsung technician can adjust the sound sync function on the TV so that the sound and picture are in sync.
To arrange a service call to adjust the sound sync function, call Samsung Customer Care at 1-800-SAMSUNG (1-800-726-7864).

Dec 05, 2007 | Samsung PCL5415R TV

1 Answer

Relay "Chatter" with good picture and sound

Sanyo Model AVM-1304 This TV has a loud mechanical "chatter" (or clicking)that appears to be coming from RL001 on the motherboard as soon as ther TV is turned on. I can feel the mechanical vibration on the component. The Picture and sound are very good. The chassis is G6Y-13040. Any ideas? This TV has a loud mechanical "chatter" (or clicking)that appears to be coming from RL001 on the motherboard as soon as ther TV is turned on replace relay as it is easily available or make it direct. .

Sep 11, 2007 | Standard (CRT) Televisions

Not finding what you are looking for?
RCA F27442 27" TV Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66685 Answers

John mullen

Level 2 Expert

229 Answers


Level 3 Expert

2963 Answers

Are you a RCA Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides