Drivers wrt54g2 - Linksys WRT600N Wireless Router

You can find the user manual here: http://homesupport.cisco.com/en-us/support/routers/WRT54G2

What drivers do you want to download?
There are not drivers for Linksys router. It works on a software called as firmware?
How many wireless computers do you have?
What is the operating system on your laptop?
If your wireless network is secured then make sure that you have the correct network key.

See How to setup Linksys router
See how to connect to the wireless network

This is the direct link to the Firmware update simply scroll down and under Firmware click download.
http://homesupport.cisco.com/en-us/wireless/lbc/WRT54G
copy and paste into address bar.

Documentation is at
http://homesupport.cisco.com/en-us/wireless/lbc/WRT54G2
But this page is way more helpful
http://www.pcwintech.com/wireless-setup-linksys-wrt54g2-linksys-firmware

From a browser enter 192.168.1.1
This should give you the web interface to your router.
Your interface should look something like this:
http://ui.linksys.com/files/WRT54G2/1.5.00/

To login leave user id blank and use 'admin' as a password (default)

Note that this model has at least 3 different variants and particulars will vary:
http://en.wikipedia.org/wiki/Linksys_WRT54G_series#WRT54G2

Are you trying to set up the router.
You can do it manually without the CD.
Make sure that your computer is able to go online through the modem.
If your computer is not able to go online through the modem then you will need to call ISP first.
If your computer is able to go online through the modem
then you need to connect the computer to the router and the modem to the router.
open the set up page of the router and change the settings of the router according to the ISP.
Click Here for step by step by instructions

There are NO drivers as such for a router, it is simply accessed via a Web browser, by typing in the address and login & password of the router, and setting it up from there. Manual & setup link how to below. belkashop.com.ua/products_files/WRT54G2_V10_EN.pdf

http://www.linksysbycisco.com/US/en/support/WRT54G2/download

Fixed it. I saw another post by someone, who had detailed step-by-step the setup proceedure with regrds to wireless. First, make sure printer is connected via USB to PC and everything works.

Next on printer, select settings, then device settings and Reset all network settings.

Next, run the CD-rom, select region, and then select Easy install when main menu appears.

Nest select only the most essential drivers, MP drivers and the Canon IJ Network tool. Select & reinstall the MP driver (main driver) and Canon IJ network solution tool.

Once they are installed. Run the Network IJ tool program, follow the setup to activate wireless.

This is how my MP620 finally worked.

Hope this makes sense.

please reset the router
configure the router type ip address on the browser
may be 192.168.1.1