Question about Estate TAWB600JQ Top Load Washer

1 Answer

My washing machine will not fill on cold water but works on the other cycles

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 641 Answers

Check first the filters on the inlet water line (both sides). Then, if problem still exist - check that the inlet water valve works(it is an electromagnet valve, located at the pipe's entrance to the machine)). If it doesn't work,test that it get power. In case it get power and doesn't work, it should be replaced. Good luck!

Posted on Sep 15, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What can cause a washer to not fill with cold water during the wash cycle?


well it would seem these are the possibilities:
1. cold water not turned on
2. hose kinked
3. inlet valves not working
4. wiring issue
5. control board issue
oh and plugged inlet fill filter
good luck

Sep 02, 2015 | LG Washing Machines

1 Answer

Machine will wash on hot only will not on cold or will not fill with cold at all


This is an indication that the solenoid on the cold water valve is bad. Or the cold water valve is plugged. If you can get to the valves, use a meter to check the solenoid OR the power to the solenoid. That will tell you if it is bad. If you dont have a meter, switch the wires from one solenoid to the other and see if it fills

Feb 01, 2013 | Whirlpool Clothes Washer Heavy Duty...

1 Answer

My wahser just stopped working it filled with water and then started agitating and then all the sudden stopped please help


When the cycle doesn't advance, it's probably the timer or a cold-water supply problem:

  • It's the timer, if your washing machine fills with water and begins agitating, but the timer never advances--or if the washer is in a spin cycle and the timer won't advance. Then you need to replace the timer.


  • It may be a cold-water supply problem, if the washing machine fills with water, agitates, drains, and spins, but then doesn't fill with rinse water. See There's no cold water
  • Jan 29, 2011 | Kenmore 24032\24036 Top Load Washer

    1 Answer

    My Maytag Neptune will not go into the spin cycle, instead the letters "nf " come on the display. What can I do to prevent this and to have the cycle completed?


    Bonnie,

    NF = No Fill the control board receives signaling for the washer during the water fill cycle. With most cycles the depth of water is around 3.5 inches in the wash basket. I know a Bulky Wash cycle selection will fill the wash tub to a high fill which is about 7.5 inches of water in the wash basket.

    Is the washer filling the machine with any water? Do you hear water entering the machine? If you are doing a cold water fill and there is no or very little water in the wash basket with the NF error code. Try a Warm or Hot fill and see if the machine will fill and start the wash cycle.

    Assuming you are doing cold water wash loads. You could have a water line block at the inlet screen or a failed cold water inlet valve which will not open. Try the above and let me know the results..........Rich

    Sep 13, 2010 | Maytag Neptune FAV6800AW Top Load Washer

    1 Answer

    Hi, my washing machine isn't working in cold/cold mode but will work in hot/cold and warm/cold. Meaning that water will not come out at all. I even started it in warm/cold and tried to switch it over to...


    My bet is that your cold water screen is plugged...

    If your washing machine will not fill, only hot or cold will fill or is slow to fill then read these tips. I have covered many of the things that can happen in these tips…


    Washing Machine Problems No Water

    Washing Machine Fix Washing Machine No Water

    heatman101

    Aug 31, 2010 | Frigidaire Washing Machines

    1 Answer

    Cold water is not filling machine when place on cold washer cycle


    Some washing machines allow cold water to enter only during certain cycles. Others intermittently allow hot and cold to enter, to temper the temperature of the water. Consult your owner's manual if you are unsure about whether the machine is acting abnormally. If you're sure the machine is not working the way it used to--or should--check the following. Is the cold water turned on? If not, turn it on. Is the washer getting hot water but no cold water? If so, check to see if the control panel settings are correct. Is there cold water coming through the proper hose? If not, check to see if the screen inside the water-inlet valve is clean. (The water-inlet valve is the device on the washing machine that the fill hoses are attached to.) If it's clean, you probably have a defective water-inlet valve. If so, you need to replace the valve.

    Jan 11, 2010 | Kenmore 24032\24036 Top Load Washer

    1 Answer

    Washer won't advance from cycle to cycle


    When the cycle doesn't advance, it's probably the timer or a cold-water supply problem:

    * It's the timer, if your washing machine fills with water and begins agitating, but the timer never
    advances--or if the washer is in a spin cycle and the timer won't advance. Then you need to replace
    the timer.


    * It may be a cold-water supply problem, if the washing machine fills with water, agitates,
    drains, and spins, but then doesn't fill with rinse water. See There's no cold water.

    Nov 16, 2008 | Danby DDW1805W Designer Series...

    1 Answer

    Machine fills with water & then clicks but goes no further. It will drain but no other function seems to work


    That is probably a problem with the timer.

    The cycle doesn't advanceWhen the cycle doesn't advance, it's probably the timer or a cold-water supply problem:

  • It's the timer, if your washing machine fills with water and begins agitating, but the timer never advances--or if the washer is in a spin cycle and the timer won't advance. Then you need to replace the timer.


  • It may be a cold-water supply problem, if the washing machine fills with water, agitates, drains, and spins, but then doesn't fill with rinse water. See There's no cold water.

  • Oct 11, 2008 | Bosch Washing Machines

    1 Answer

    Whirlpool AWO3761 stuck mid-cycle


    The cycle doesn't advanceWhen the cycle doesn't advance, it's probably the timer or a cold-water supply problem:

  • It's the timer, if your washing machine fills with water and begins agitating, but the timer never advances--or if the washer is in a spin cycle and the timer won't advance. Then you need to replace the timer.


  • It may be a cold-water supply problem, if the washing machine fills with water, agitates, drains, and spins, but then doesn't fill with rinse water. See There's no cold water.

  • Jul 06, 2008 | Whirlpool AWM6100 Front Load Washer

    1 Answer

    Water only fills the machine in certain parts of cycle


    a 90* wash will fill mainly with hot water / a 40* wash will fill mainly with cold water, this is normal action, rinses fill up with cold water only

    is this what you are describing, if so thats normal, especially if its doing the job correctly

    Oct 14, 2007 | Frigidaire GLTF530DS Front Load Washer

    Not finding what you are looking for?
    Estate TAWB600JQ Top Load Washer Logo

    Related Topics:

    73 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Estate Washing Machines Experts

    Marvin
    Marvin

    Level 3 Expert

    85160 Answers

    Bobby G
    Bobby G

    Level 2 Expert

    212 Answers

    Steve Allison
    Steve Allison

    Level 3 Expert

    5569 Answers

    Are you an Estate Washing Machine Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...