Question about Washing Machines

1 Answer

Problem with indesit we16.

My indesit we16 keeps on saying door on the lcd screen about 3 mins after i try and start it. I changed the door interlock but this has not resolved the problem. Can anyone help?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: Problem with indesit we16. - Washing Machines


Posted on Nov 06, 2009

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

When i Press start the washing machine clicks a few times then red padlock light comes on. Door interlock changed but still happening. Any help appreciated.

I gather that the interlock has been replaced and now the padlock symbol lights up plus some clicking. I think the clicks are the door lock engaging and the padlock just shows this. Do the clicks continue? Does the door stay locked? If so I believe you have a fix.

May 19, 2015 | Indesit Washing Machines

1 Answer

Won't start keeps fashing door on screen

The door lock may be jammed kindly switch off the unit and check whether you are able to open the door after 3-5 mins if you are unable to open the door means the door lock switch is defective kindly change the door lock switch

May 18, 2010 | Washing Machines

1 Answer

Lights flashing on indesit WIL123S

Hi, sounds like you need to change the door interlock located where the door catch pushes into.
Take the top off and undo the two screws with a tork screwdriver
and replace.
(Remember to turn off the supply and pull out the plug top)

May 09, 2009 | Indesit W 123 Front Load Washer

1 Answer

Machine keeps saying error

E40 is an error from the door locking mech (interlock).this is the bit behind the port hole door frame at approx 3 o clock pos,where the door striker pin goes through hole.

Held on with 2 screws and you need to remove plastic clamp from door gasket to gain access.

Check the Door Switch/interlock or the WIRING for failure in this case and repair as necessary.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Mar 16, 2009 | Washing Machines

1 Answer

Light for door keeps flashing when shut hotpoint aquarius

When you say new door clip fitted, I assume you mean door handle, if this is the case then it could be you have not got it back together properly, if you have, then it could faulty door interlock

Dec 05, 2008 | Indesit W 123 Front Load Washer

3 Answers

F-02 fault code on indesit we16 washing machine

According to info on a similar site to this, it means motor jammed/tacho faulty or detatched

Mar 23, 2008 | Washing Machines

2 Answers

Indesit WIA 121

this could be your interlock this is what sends power if this is not working the washer wont work simple way to test is close the door and bang the front of the washer were the interlock is if its a faulty interlock or a lose wire then it may start up but more then likely that it is the interlock m8

Feb 18, 2008 | Indesit W 123 Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

269 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides