Question about Computers & Internet
Please guide me step by step how to configure 'HG520' Wifi router provided by MTNL for BSNL broadband services. In the first place can we use the MTNL router for BSNL Broadband or not???
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Connect modem to the internet port of the wrt54g
Connect pc to port 2 of the wrt54g
Reset the wrt54g, push reset button for 30seconds with the power on, uplug the power for 10 seconds
Open internet explorer, type 192.168.1.1, you will be asked to login, no username, password is admin. This will take you to the router page. On the page you will se AUTOMATIC CONFIGURATION DHCP, change that to PPPOe, enter your broadband username and password. Click save settings at the buttom of the page. YOU WILL ONLY GET CONNECTION IF YOUR USERNAME AND PASSWORD IS CORRECT.
Posted on Mar 15, 2008
SOURCE: MTNL INTERNET PROBLEM
Since your ISP provided you a username and password when connecting to a broadband connection, you have to setup the router's "Internet Connection Type" to PPPoE then you need to enter the username and password that you are using to connect to your broadband.
Once you do that, the router will obtain an IP address from your ISP(MTNL) then it will give connections to your computers
Posted on Aug 03, 2008
Reliance Wimax will be Dynamic (DHCP)
Step 1 :
Connect the Wimax wire from the wall outlet (power adapter provided by Reliance) to the computer directly. The computer must be in DHCP mode.
Check the IP Address of the Computer. It should be a public IP Address.
Step 2 :
Open a web browser. If you try to open any page, it will take you directly to the Reliance Broadnet Login page. Login with your Reliance User ID and Password. Then Log out.
Close the web browser.
Step 3 :
Now, connect the wimax wire to the WAN Port on the Router and the computer to any LAN port. You can open the Router Setup Page. Do MAC Cloning. Then, save changes. Run DHCP on the Router.
Also you can configure wireless network, by changing the SSID and security.
Step 4 :
On the wired computer, open web browser, go to Reliance Broadnet login page and login and start enjoying the service.
One problem, you might face is when the Router is turned off in between. You may have to repeat the Steps 1,2 & 3 to get the connection back.
Posted on Oct 20, 2008
There is a pretty good writeup here:
But if you have already configured the modem and it does work.
All you need to do is plug an ether net cable from that to the 'Uplink' port on the back of the WRT router.
After that it should serve that conection out to the machines that are cabled to it. The other machines that you will connect wirelessly can be done through the web interface to the WRT. Which will appear at 192.168.1.1
Posted on Apr 29, 2009
Tips for a great answer:
Jan 30, 2014 | TP-LINK TL-MR3420 Wireless Router
Dec 20, 2012 | Computers & Internet
Dec 09, 2010 | Intel Computers & Internet
Jul 08, 2009 | Computers & Internet
May 05, 2009 | Zyxel Prestige 660R Router (P660R)
Oct 30, 2008 | Siemens SpeedStream 2624 (SS2624) Wireless...
Aug 01, 2008 | Computers & Internet
Feb 08, 2008 | Paradyne (6211-A2-200) Router
Jan 14, 2008 | Computers & Internet
Aug 17, 2017 | ASUS Computers & Internet
Aug 17, 2017 | Dell Computers & Internet
1,592 people viewed this question
Usually answered in minutes!