Question about Computers & Internet

1 Answer

Changed user name and password and now don't remember them.

Have a Hama 00062743 router. I changed the log in user name and password and now, of course, can't seem to come up with a match. Can it be reset? Thanks, Russ

Posted by on

  • Russ205 Apr 16, 2009

    Hi fernie727,



    Thanks for the help.



    No where in the user guide was the reset button mentioned.



    The button, on the back of the case, was fairly large, just smaller than pencil eraser sized, and easy to spot, once one was looking for it.



    It took the entire 30 seconds before it blinked and reset.



    However, when I tried to log on to the page nothing happened.



    Turns out you have to unplug the modem for the thing to reboot and reset the settings.



    Then, got onto the modem config area, no problem.



    Thanks!!!



    Russ

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 18 Answers

Yes all routers have a manual reset button, in the back of the router, its like a little black dot, try getting a paper clip and put it in there and hold it for 30 seconds while the router is connected, then it will restore it to factory mode.

i hope this helps...

Posted on Apr 16, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i change my username


You need to go into the setup on your router. There you will find a screen to change the user name and password.
If you are locked out your can reset the router to factory codes by pushing the reset button.
You need to know the IP address of your router and the default name and password provided. This will be found in the users guide.

Jan 17, 2015 | Computers & Internet

1 Answer

Routerlogin


  1. Connect with your computer through one of the RJ45 jacks at the back.
  2. Turn on you computer and connect to the router (factory default is http://192.168.0.1 unless it was changed)
  3. Enter your user name and password (factory default is "admin" for the user name and "password" for the password.

If you changed any of the above and don't remember how it was set it up. You'll have to reset the router to factory defaults and reconfigure your router. There is a switch at the back of this router to do this (you need a paper clip to press it). If I remember correctly, you have to hold the switch and power the router.
, you have to hold the switch and power the router.

Jan 25, 2013 | NetGear WGR614 Wireless Router

1 Answer

Cannot remember user name


If you have never changed the user name and password you can just do a search for your router type's default user name and password.

Oct 26, 2012 | Computers & Internet

2 Answers

What's your problem?my email has changed and i cant remember my user name or password how can i fix this


go to email log in screen and choose forgot password option and follow instructions

May 30, 2012 | mywalmart.com

1 Answer

How do you log in to the router


If you have not set up the router with a new user name and password it is:
username: Admin
Password:
If you have changed this information and cant remember it, there is a reset button on the back of the router; push it in for about 20 seconds with the power on. This will reset the router to factory defaults and allow you to log in with the above information.

Mar 01, 2012 | D-Link Computers & Internet

1 Answer

I lost my security key, how do i recover it?


Hi,

You have to enter the router's configuration page by typing 192.168.1.1 and you will get a log in page.

Default user name:admin
Default password:

As soon as you are logged in, please go to the wireless tab. You're suppose to see the security key if not you may change it to a new one.

If default user name and password rejected and you don't remember setting up your login name and password, you have to reset the router. Get a paperclip or pin and press the reset pinhole on the back of the router. It's in red color. Press and hold it down for 5 seconds. After that back to the login page by typing 192.168.1.1 on the address. This time for sure the default username and password will work. Now since you reset the router you have to run the wizard to setup the router.

Here's the link for the manual of your router.

http://www.wtrt.net/manuals/Linksys_WRT120N.pdf

Thank you!

Jul 13, 2011 | Linksys WRT120N Router

2 Answers

I have tried to connect to http://192.168.0.1 to change my password but it says to type in admin and use the same word "admin" as password and it won't let me in.


Hi.

Try this, type http://192.168.0.1 into your browser again and load the page up. When the box pops up asking for user name and password type in the user name box admin
In the password box type password and see if you can log in.

If you still can't get in please post the make and model of the router.

Let me know how you get on.


Good luck.

Jun 20, 2011 | Computers & Internet

1 Answer

How do I find my security key for a D-Link DIR-625 router?


Hello,

You will need to log into the router's web page to view the security settings and access your security key. The default IP address of D-Link routers is normally 192.168.1.1; simply input this IP address into the address bar of your web browser.

You will be brought to a D-Link page and be prompted for your user name and password. If you have not made any changes then the default password should be admin. If you changed the user name and password simply enter them here.

You will need to click on the "setup" tab found at the top of the page. Now you will need to click on "setup wireless" or "Wireless settings" to access the manual configuration. Now you will be able to locate the security key.

If you are unable to locate any of these or you have changed the user name and/or password and no longer remember what they are, you will need to reset the router and set up your wireless network from scratch.

Thanks,

Pat

Nov 07, 2010 | D-Link DIR-625 (790069292637) Wireless...

1 Answer

When i set up the router i gave a password but


If you want to change the password to access the router you can open your browser and put in the address 192.168.1.1 (unless you changed it) and press enter. You should be prompted for a user name and password. Leave the user name section blank and put in the password for the router. Once you have logged into the router successfully, you will see the Administration tab. Click on it and you will be able to change the router password. Save the changed and close the browser window when you are finished.
If you need to change the Wireless Internet password, you can click on the Wireless tab, go to Wireless security and change the passphrase there too.
I hope this helped. Thanks for using FixYa.com!!

Apr 18, 2010 | Linksys WRT54GP2A-AT Router (WRT54GP2AAT)

1 Answer

I can not remember my password so i can use my wi fi. So how do i reset my password. i can log on to the router can i change it in the settings?


Reset
Pressing the Reset button for 5 seconds restores the router to its original factory default settings.

Log in to the Router
This section will explain how to log in to your router using the following steps:
1. Launch your web browser.
2. Enter the URL http://192.168.1.1 in the address bar and press Enter.
A login screen like the one below will be displayed after you connect to the user interface.
Note: There are three account types, each requiring a different username and password.
• The user account provides limited access to certain configurations (username / password: user / user).
• The admin account can perform all functions
(username / password: admin / admin).
• The support account is for ISP technicians for maintenance purposes
(username / password: support / support).
Note: Passwords can be changed at any time.
3. Enter your user name and password, and then click OK to display the user interface.
Note: This manual has been prepared using the admin user name

Aug 20, 2009 | D-Link ADSL2/2+ Modem/Wireless Router...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...