Question about Canon NP 6035 Copier

2 Answers

I have Canon NP 6030 and I cannot load paper in any of the trays because it will not feed them. Was using the manual tray and now it only jams paper. Should need cleaning but do not know how to do that. I live in a very remote area of Africa and use this copier for a non profit school. A technician would have to travel almost 300 miles to get here. What should I do to rectify the problem. Also can I download a manual for this machine? The one I have is German and I do not know German. Neither does any one here. Please help.

Posted by on

  • 3 more comments 
  • mle2ebangit Apr 17, 2009

    I do not understand you people. You promise a solution. I get your email 20 hours later. And it tells me to click in and that I can download a free service manual. I do that and then it tells me the "free" manual is only a skeleton. To pay more to get the real thing for one day or pay much more to get it for more days or pay much much more to get it for a year. Yet I wanted solutions for my money which is what you promised.

  • mle2ebangit Apr 17, 2009

    I have clicked the link but am unable to even get anything on the free manual. Now what?

  • mle2ebangit Apr 17, 2009

    I have done that repeatedly and when I do it says click for free download but it says it downloading but when downloading finishes there is no manual it says too upgrade.

  • mle2ebangit Apr 17, 2009

    I did that! That is what I am tellin you. I did that! and still I did not gy manual only table of contents and it says use such and such password and there is no place to put the passsword. When I click free button that is what I get. Now what?

  • mle2ebangit Apr 17, 2009

    I followed the instructions and it said:

    Your IP address is already downloading a file. Please wait until the download is completed.



2 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Contributor
  • 854 Answers

You can download the free manual in this link below;

Instructions for rapidshare download;
1. click "Free user"
2. wait the timer to finish
3. click "Download" ( this is the blue sign says download )

to open this file you will need to use WINRAR applications ( you can go to this site to download it:

by the way the password is :

Hope this helps...

Posted on Apr 17, 2009

  • redhaze89
    redhaze89 Apr 17, 2009

    after you download the file. You will open this using WINRAR program (this is th link to download and install: You will prompted to put in the password. Just copy, paste the password:


  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 8,619 Answers


I understand sometimes it really becomes very frustating not to find a technician in near by area however this is the site from where you can always get the right assistance. I am sending you this service manual which I hope will resolve all your issues.Please click on the link to download the free service manual :

Canon NP 6030 Service Manual

Please do accept the solution if found userful and revert for further assistance.


Posted on Apr 16, 2009

  • Rylee Smith
    Rylee Smith Apr 17, 2009


    The link i provided you is working and you can download the service manual for your Canon NP6030 for free. Please click on this link to download the service manual---

    Canon NP6030 Service Manual

    After you click on the above link a window will open up and from there click on Free User button and then download the service manual.

    Please do accept this solution and revert for further assistance.


  • Rylee Smith
    Rylee Smith Apr 17, 2009

    The issue is not with the manual, you'll need to download this software---


    Please do accept the solution if found userful and revert for further assistance.




1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

On Oki 330 have error 380 still showing after paper jam was cleared

Make sure everything is clean. Please refer to your manual for cleaning instructions; or download a new manual at .

Below are how to clear a jam instructions:
How to remove jammed paper 28/07/2013
Paper handling is key to Ensure trouble-free printing. However, paper jams sometime Occur.
You can improve feeding and Avoid paper jams in your OKI printer, by following these simple steps:
Loading the Paper: When loading paper, fan the stack of paper before placing it in the tray. This will shake out any paper dust and reduce any static in the paper, two major causes of paper mis-feeds.
- Place the paper in the tray under the tabs.
- Do not fill above the "PAPER FULL" mark.
- Guides Adjust the tray for the correct paper size.
Recommended Media: Use paper specified for the printer
When printing on heavy / thick types of paper, it is best to use the manual feed tray at the front of the printer.This will Provide a straighter paper path to Prevent potential paper jams.
Cleaning: Periodically wipe the rubber rollers inside the area That holds the paper tray with a soft cloth.
dust Paper and simple wear may cause these rubber rollers to slip and not feed the paper properly.

Nov 29, 2013 | OKI C3400n Laser Printer

1 Answer

Always paper jam at the cassette tray

Odds are that you will need the paper pick up & paper feed & paper seperation roller replaced. Also, have you taking the paper tray out and look to see if there is paper bushed behind the paper tray? Good Luck

Jan 26, 2011 | Canon NP 6035 Copier

1 Answer

I removed a jammed sheet of paper through the front opening, Had to pull real hard. Since then, when printing or copying, printer feeds up to 4 extra sheet with each printed page. I suspect some piece of...

Please see this solution from Canon. It is recommended you check your manual for the proper procedure for clearing paper jams. Incorrectly removing jams could damage your printer. Trust the following helps resolve your current issue.

If you do not have a manual it can be downloaded from here:

Issue: More than one sheet of paper feeds while printing

Solution: Clean the paper feed rollers using the MX300 operator panel

sikaku.gif Cleaning the Paper Feed Roller (Roller Cleaning) Clean the paper feed roller if paper is not fed properly. Cleaning the paper feed roller will wear the roller, so perform this only when necessary.

1. Make sure that the machine is turned on, and then remove any paper from the Rear Tray.

2. Clean the paper feed roller.

(1) Press the Menu button repeatedly until MAINTENANCE appears.

(2) Press the l_mark_s.jpg or r_mark_s.jpg button to select ROLLER CLEANING, then press the OK button.

The paper feed roller will rotate as it is cleaned.

3. Repeat step 2 twice.

4. Open the Paper Output Tray.

(1)Put your finger in the rounded indent beside the Paper Output Tray and open it gently.

(2) Open up and set the Output Tray Extension completely by pressing down the hollow on its front side.

5. Make sure that the paper feed roller stops rotating, then load three or more sheets of A4 or Letter-sized plain paper in portrait orientation in the Rear Tray.

Set the Paper Thickness Lever to the left.

6. Repeat step 2 three times.

The paper cleans the paper feed roller as it feeds through the machine.

If the problem is not resolved, wipe the paper feed roller (A) located on the right side inside the Rear Tray with a moistened cotton swab or the like. Rotate the roller (A) manually as you clean it. Do not touch the roller with your fingers; rotate it with the cotton swab.

Dec 25, 2010 | Canon MX300 Office All-In-One Printer

2 Answers

Paper jams in machine does not come out into trays

Any number of problems.....the most simple is that could the paper size is set incorrectly (either size and/or orientation) so the paper is not where the machine "expoects" it to be -check your tray settings. Otherwise, it could be dirty/worn rollers, blocked, or dirty paper sensors, fuser problem (depending where the paper is. The bottom line is....if you have the tray set correctly, then the solution to the problem will require technical intervention

Jun 09, 2009 | Canon NP 6050 Copier

1 Answer

Paper pick up problem

hi,try to clean feed rolls,sensors.clear any misfeed sheet from paper supply area.send me a result.
thank you.

Jun 01, 2009 | Canon NP 6050 Copier

1 Answer

I can only print by manually feeding in each page -HP 4MV Printer

Good old 4MV.
paper jam is just the way the printer i stelling you "something" wrong with paper feed".
you need to locate a "4MV repair kit" , they are not cheap. but, if you wan to keep the printer, it is worth it. cost of the ket is $50
includes Instruction CD rollers, and other repairable parts.

Dec 15, 2008 | HP LaserJet 4mv Printer

1 Answer

NP6050 false paper jam

Can you see the paper pick-up rollers try to move and pick-up the paper? Or can you hear it make noise? Also, is the problem in paper tray 1? You may have to adjust or reform a inter lock arm on the right side door. If you push the back part of the right top door closer, will it feed the paper? If so there is adjustments for the door and look for a bent Tab on the hing part of the top door about half way up. Just a note have the paper pick-up & paper feed and paper sep rollers been replaced?

Dec 15, 2008 | Canon NP 6050 Copier

1 Answer

Canon NP 6050 Copier

actually u hv not putted ur pblm correctly...
paper is jamming in ur machine but fm which tray u r taking paper...
n e way ...
1..if paper is comming fm down trays (i.e. 1,2,3,..or4) , try to clean the Pickup rollers of rubber material (at down side to the duplex tray or upside to the each tray) with some water and smooth cloth
2..if paper is comming fm bypass section then ur bypass pickup roller must be cleaned like above, or it must be replaced...
....try this and then also if not solved then place ur question again in detailed..


Aug 15, 2008 | Canon NP 6050 Copier

4 Answers

Paper Jam Problem in Canon LBP 2900

I have a same problem .... somebody help us. :(

May 23, 2008 | Canon LASER SHOT LBP-2900 Printer

1 Answer

NP 6030 paper jam

It may be this simple:

1- as silly as it may seem, are you sure the size  is correct, if it is a letter size paper and it says legal, it will jam. open the paper tray and make sure the guides are snug againgst the paper,

does it say letter (or legal) for the tray you are going to use, if they do not correspond then look behind the tray inside the machine, is there a paper jammed in the back?


Or not so easy

2-You are having a sensor problem, take a look at the duplex tray,

pull it out and look at the sensors ( black little levers that stick out) are there any pieces of paper, can you move them and they spring back into place?

Oct 22, 2007 | Canon imageCLASS D761 Copier

Not finding what you are looking for?
Canon NP 6035 Copier Logo

Related Topics:

255 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

old marine
old marine

Level 3 Expert

2097 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides