Question about Acer Aspire 5520-5908 Notebook

1 Answer

My laptop don't turn on but the green light in

My laptop don't turn on but the green light in the power button turn on and off how can I fix this error also the the screen still off any one can help me please!!!!!!

Posted by on

  • fer507 May 11, 2010

    I see now the model, sorry. Try to do this. This usually happen when you had an USB device connected before you turned off the pc.Try connecting any USB device and turn it on.

  • fer507 May 11, 2010

    could you please specify brand and model?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 45 Answers

You have power but no screen? try swipping your finger over mouse pad or pushing keyboard....also try a power cycle...unplugging battery but leaving the the poewr adapter in..push power button down for 1 minute....then press poewr button again...it might solve the problem...if not shine a flash light at screen see if you can see a faint image..there might be a problem with the inverter or backlight that lights up the screen...also try external monitor ifyou hvae one...and make sure computer power adapter is good and the battery is good...if this doesn't help you might have to get it serviced...if under warranty call warranty companie...if not under warranty call local computer repair shop

Posted on Apr 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Asus X553M laptop is not booting up. Any ideas how to fix this problem?


Temitope, Hard reset. Open computer, remove battery,hold power button down (((1 minute))), reinsert battery, reassemble laptop, push/hold power button a couple seconds.
2nd fix, try to boot laptop without hdd.(hard drive). Remove the hdd, then turn on the laptop.. then it can get into the bios.. reset the bios to the default setting, turn off the laptop, and then turn it on again with hdd reinstalled. This seems to be what works in the forums with this issue found in Asus laptops. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Asus Laptop unable to boot black screen no bios
How to Fix Laptop that Won Turn On Asus X551M
Laptop Won Turn on Fix How to Hard Reset Laptop
Asus laptop not booting

Aug 21, 2016 | ASUS Computers & Internet

2 Answers

How can i fix error 5200 on my canon pixma ip2770


Hi there,
You can try the following 1. Turn off printer, cable power still plug in,
2. Press Resume Button don't release
3. Press Power Button don't release and than release Resume Buttons
4. Press Resume Button 6X
5. Turn off printer cable power still plug in
6. Turn on printer again, now this printer ready to use.

Or try

1. The printer is turned off and plugged the power cord.
2. Press Resume button 2 seconds
then press the POWER button until the green light on (when pressing the POWER button, Resume button ... jgn released first)
3. Then release the RESUME button, but do not release the POWER button.
4. While the POWER button is still depressed, press the Resume button 5 times. Led will light turns green orange with the last glow orange. (do not be mistaken 4x because the printer will die completely, but it is temporary too) Then ...
5. Release both buttons simultaneously.
6. Led will blink briefly and then will glow GREEN.
7. And the computer will detect new hardware, just ignore ...
8. Press the POWER button, then the printer will die.
9. Press the POWER button again then the printer will flash and ... IP2770 Printer is ready to use

Jul 27, 2011 | Canon Office Equipment & Supplies

1 Answer

Briefly: laptop cant turn on Detail: After pushed power button, the note book didn't turn on. Screen kept black. Power button didn't light on(usually should). The laptop is without any sound...


The first solution I'd recommend is removing the battery and then trying to power on just with the AC adapter. Why are you afraid to remove the battery? no data will be lost.

It maybe that you have a dead motherboard or that there had been a power failure while you were putting your machine to hibernate.

Jul 03, 2011 | Computers & Internet

3 Answers

My Canon iX4000 has changed its colours during printing, with Red noticeably being printed as green. I have a Canon 5PGBK & Calidad 922 Cyan, Magenta & Yellow Cartridges. Do you think the...


Welcome to Fixya
If this happened recently then try to reset the printer to factory state. Please see procedure below:
1.Connect the Canon PIXMA iX4000 printer to the power cord. ( note : If the automatic power-on function is enabled in the printer, the printer enters the service mode for the first time, but it will never enter the service mode if the printer is turned off by the Power button. This is because the printer remains to be turned on internally if the power is turned off by the Power button. To prevent this, disconnection of the power cord is required before starting the printer in the service mode ) .

2.With the Canon PIXMA iX4000 printer powered off, while pressing the Resume/Cancel button, press and hold the Power button. (note : Don't release the buttons. The Power LED lights in green to indicate that a function is selectable.)

3.While holding the Power button, release Resume/Cancel button. (Don't release the Power button.)

4.While holding the Power button, press Resume/Cancel button 2 times, and then release both the Power and Resume/Cancel buttons.

5.When the Power LED lights in green, press the Resume/Cancel button 4 times to reset waste ink counter in the Canon Pixma iX4000. (note : If the Power LED does not light in green the printer does not enter the service mode, disconnect the power cord and plug it again. Then start from step 1 to start the printer in the service mode again).

6.At the end of the service mode, press the Power button. The paper lifting plate of the sheet feed unit will be raised.
Note :

Each time the Resume/Cancel button is pressed, the Alarm and Power LEDs light alternately, Alarm in orange and Power in green, starting with Alarm LED.
Other specified number of time(s) according to the function listed in the table below.

Time(s) LED indication Function Remarks
0 times Green (Power) Power off
1 time Orange (Alarm) Service test print
2 times Green (Power) EEPROM information print
3 times Orange (Alarm) EEPROM initialization
4 times Green (Power) Waste ink counter resetting
5 times Orange (Alarm) Destination settings
6 times Green (Power) Print head deep cleaning (Cleaning of both black and color)

Thank you for using Fixya!

Jun 19, 2011 | Office Equipment & Supplies

1 Answer

Canon iP4500 The ink absorber is full Contact the service center


To reset the ink counter
1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not, press the Power button once more.
To clean the pad you will have to disconnect the printer from the mains, move the heads aside, take out the pads with a long pair pf pliers (the black sponges that were under the heads) and clean them with running water until they are white. If you are careful and able to wait a few days you don't even have to take them out: just move the heads to the other side and, above the sink, pour hot water over them until they are clean; than drain all the water and leave the entire printer to dry for over a day.

May 29, 2011 | Computers & Internet

1 Answer

What the Solution for ''canon pixma mp145 ink obsorber is full''always alarm.. thank u


fix error e27.....from Desmond



. Turn off your printer then press the Power button while pressing and holding the Stop/ Reset button.

2. When the Power is lit, press the Stop/Reset button twice while pressing and holding the Power button.

3. When you release the Power button and the Stop/ Reset button, your printer will move into a service mode.

4. When the on/off lights is in green, press the Stop/Reset button 4 times. You will then notice that each time the Stop/Reset button is pressed, the LED lights alternately in orange and green.

5. Turn off your printer.

6. Turn on your printer.

7. If unsuccessful go back to first step and try again :D .

8. If still unsuccessful don’t cry yet just repeat the above procedures until you get your desired result.

Jun 06, 2010 | Office Equipment & Supplies

1 Answer

Canon MP 160 message ink absorer is full contact service center. What do I need to do?


. Turn off your printer then press the Power button while pressing and holding the Stop/ Reset button. 2. When the Power is lit, press the Stop/Reset button twice while pressing and holding the Power button.
3. When you release the Power button and the Stop/ Reset button, your printer will move into a service mode.
4. When the on/off lights is in green, press the Stop/Reset button 4 times. You will then notice that each time the Stop/Reset button is pressed, the LED lights alternately in orange and green.
5. Turn off your printer.
6. Turn on your printer.
7. If unsuccessful go back to first step and try again icon_biggrin.gif .
8. If still unsuccessful don’t cry yet just repeat the above procedures until you get your desired result.

Read more: http://pcremix.com/how-to-fix-error-27-on-canon-pixma-mp145/#ixzz0lWttXXtt

Apr 18, 2010 | Canon PIXMA MP160 All-In-One InkJet...

2 Answers

Computer starts and stops within seconds but batt light is solid green and pluged in


Ensure That your Power button is clicking back and staying connected - this would cause the computer to shut down immediately.

Feb 04, 2008 | Sharp Actius AL27 Notebook

1 Answer

Toshiba Satellite 1405 - Power problem


Hi Don

Although symptom is showing that AC Adaptor is not working as its not providing power to the unit. I will suggest you to perform some basic troubleshooting steps. Check if outlet is working if not check with known working outlet. If you have a multimeter you can the output of the AC adaptor.

Also you can perform full power cycle and component discharge. Take the battery out and disconnect the AC adaptor press the power button and hold about 7 seconds. After that put the AC adaptor in and test again.

If issue persist take to nearest Service center check with known working AC adaptor. After that I believe you will figure out the best solution.

Good Luck

Jan 21, 2008 | Toshiba Satellite 1405-S151 Notebook

Not finding what you are looking for?
Acer Aspire 5520-5908 Notebook Logo

266 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acer Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18391 Answers

Mohammed Ebrahim M
Mohammed Ebrahim M

Level 3 Expert

609 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Are you an Acer Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...