Question about JBL GTO Series RLC Amplifier Accessory - Remote Subwoofer Level Control for Select Grand Touring... Car Audio Amplifier

1 Answer

JBL EON15 PA Speaker problem

Hi one of my JBL EON15's Cone does not seem to be firing at all there does not seem to be any seeable damage on the out side of the cone. the loudspeaker is working just fine. Iv'e hooked it up through a couple different sources and still the 15'' cone will not fire. If anyone can help out with this little problem of mine or can direct me to a better source of information let me know Thanks, Connor

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 113 Answers

Check the wire terminals under the cone by the spider and make sure that they are both still connected

Posted on Jul 05, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The 15" speaker in my JBL EON 1500 IS NOT WORKING. . IS IT POSSIBLE TO BLOW A FUSE OR THE CROSSOVER CIRCUIT OR SHOULD I GO RIGHT TO THE SPEAKER AND OHM IT OUT?


Check for voice coil resistance. Should be around the stated impedance rating. Assuming it is ok, then move the cone carefully back and forth along the magnet, if any rubbing the coil has been damaged. A damaged coil is not repairable - you replace the driver.

Nov 19, 2015 | JBL Audio Players & Recorders

1 Answer

My jbl eon 15 g2 smell like burnt and everything works but the big speaker


The voice coil in the big speaker could have been damaged if driven to loud. See if the burnt smell is strongest near the center of the big speaker. If the voice coil is fried, you may be able to still find a replacement as there is a part number for the voice coil (V/C Assy, EON-G2220-27005-00) and the cone (EONG2
Cone Repl. C2REON15P-2)

Jan 18, 2015 | JBL EON 15-G2 Powered DJ Speaker With EQ...

1 Answer

Remote reset


Yes the woofer and tweeter can be replaced but the woofer needs a recone kit to repair as the whole speaker cannot be replaced without replacing half of the speaker enclosure.... call JBL pro or a service center for help.

Oct 08, 2013 | JBL EON15 G2 Main / Stereo Speaker

1 Answer

Loud buzz/hum started on jbl eon 1500 powered speaker one side only after power cut off and sudden power back on makes same noise on it`s own as well as with mixer etc could this be a transformer...


For some reason the soft on protection circuit has failed. it is not a simple fix and would require the amplifier module to be removed from the speaker to assess the damage.

Mar 10, 2012 | Jbl Eon 515 Eon515 15 Powered Portable...

2 Answers

My JBL eon 15g2 speaker was working fine and then suddenly the lower woofer suddenly stopped. The higher tweeter still seems to work. All of the fuses are fine and all the wires seem to be properly...


the braided wires from the speaker connectors to the voice coil could be broken (from repetitive movement) or it could be the voice coil it self that could be cut open from a miss alignment of the cone (ware and tear), delicately push on the cone and feel if it rubs, a simple test is to check the IMPEDANCE of the speaker with a OHMMETER, if you have a reading (4,6,or 8 ohms) than the speaker is fine, check the rest of the wiring, if it reads OPEN than you need a new speaker...

Apr 09, 2011 | JBL EON 15-G2 Powered DJ Speaker With EQ...

1 Answer

How to replace damaged subwoofer? Opened cabinet and found that the woofers' voice coil has burnt and the cone can't move. How to replace it the damaged speaker?


Since the coil is attached to to cone, you are looking at replacing the whole 15" driver (speaker)
To get access to the screws that hold it in place, you'll need to remove the front bezel from the cabinet, then remove the screws around the speaker's rim.

For what it's worth, that driver isn't a subwoofer, it's just a 15" driver. JBL does make 15" and 18" subwoofer drivers, but they aren't the same speaker as what's in this EON. Hopefully that will help you when you're shopping for a replacement driver.

Apr 10, 2010 | JBL EON 15-G2 Powered DJ Speaker With EQ...

1 Answer

My JBL Eon15 g2 has a cracklin sound within the main component when the bass is turned up. How can I fix this?


it can be the amp or the speaker itself. it has to be diagnosed by a service center.
if the amp is the problem, there can be board replacements or component level repair. if it is the 15" speaker, then it can be reconed with authentic genuine JBL parts returning it to brand new. cathy@speakerex.com

Jun 21, 2009 | JBL EON 15-G2 Powered DJ Speaker With EQ...

4 Answers

Damaged JBL Eon15 Tweeter


you can probably by a generic type of motherboard from a shop like JAYCAR lookem up on the net ]

May 25, 2009 | JBL EON 15-G2 Powered DJ Speaker With EQ...

1 Answer

JBL EON15-G2--Does the HF Amplifer to the driver have any voltage?


The 2 leads that come off the HF driver are different sizes...you should only be able to hook them up one way. Takes the guess work out of it for ya.

Assuming there is nothing wrong with the speaker, hooking up the 2418H HF driver to it should do the trick. However, I blew my HF driver a few months ago and bought a new one, only to blow it immediately. This was because the motherboard of the JBL EON G2 had actually failed and caused the HF driver to fail. Once I replaced the motherboard and the HF driver (again) everything was back to sounding great. Hope that helps.

Oct 10, 2008 | JBL EON 15-G2 Powered DJ Speaker With EQ...

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

195 people viewed this question

Ask a Question

Usually answered in minutes!

Top JBL Car Audio & Video Experts

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1147 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Mark Skinner

Level 2 Expert

77 Answers

Are you a JBL Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...