Question about Konica Minolta Magicolor 2530 DL Laser Printer

1 Answer

My magicolor 2530 dl printer keeps jamming

It won't print out one page unless I leave the green tabs up on the inside of the printer. When I put them up it will print but it doesn't push the paper close enough for a clean print.

Posted by on

  • distortedgir Apr 20, 2009

    I am using the proper paper. I can see now that there is paper jammed behind the fuser(?) I tried to use tweezers to pull it out but I cannot reach it. Is there a way I can remove the roller to clean all the paper out of there?

  • Dan Hudson May 11, 2010

    The green tabs set your fuser pressure. When they are up, that is for card stock paper. It is also good to leave them up when you are going to store your printer for a long time. I can see no reason it should need them up with 20LB paper.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 118 Answers

It is very difficult to remove the fusers. I did this once, and it was enough. Essentially, you must take the machine apart enough to release the metal sides enough to lift it out. Your best bet is a samll pair of medical hemostats and the green tabs up to release pressure. Dont use tweezers, because if you nick the red roller (it is soft) you will have blemishes from that fuser forevermore. I can mail you the manual if you wish to try. My mail is dhudson at Gmail, mprivate message me and I can send it as an attachment.

Posted on Apr 20, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Media jam fuser


replace the fuser unit. and replace the transfer roller and belt,

Jan 30, 2014 | Konica Minolta Magicolor 2530 DL Laser...

1 Answer

Magicolor 2530 DL Laser Printer: reset image drum 2530...


I had this same problem however I was using the Magecolor 7450. I was trying to print a C5 postcard and the right hand side of the document was getting cutoff (aprox 2 in). Changing my Paper-Type settings on the printer from "Postcard" to "Any" magically fixed the problem.

I hate this printer.....

May 18, 2010 | Konica Minolta Magicolor 2530 DL Laser...

1 Answer

I have 2 lines down my page where the document is not printed. I have repaced all of my toner and I have 30% left on the drum


There is an elongated Rectangular mirror about .5 x 6" when you pull out the imaginning unit and behind all the catiges, cleen softly with a cloth that doesn't leave anything behind and it should solve the problem.

Oct 03, 2009 | Konica Minolta Magicolor 2530 DL Laser...

2 Answers

2530 DL problem printing, has a streak of white line all the way down the page. Has plenty of toner in it.


If all the toners are not empty, then you have toner or dust on the print head unit. Remove the drum cartridge and you will see beneath it a narrow glass, just be sure that glass is clean.

Jun 07, 2009 | Konica Minolta Magicolor 2530 DL Laser...

1 Answer

Fatal Error Code 16H


Hi, pretty sure its the transfer belt not able to turn, remove it and make sure there is nothing blocking it, maybe a paper jam

Aug 05, 2008 | Konica Minolta Magicolor 2530 DL Laser...

1 Answer

Konica minolta magicolor 2400w printing proplem


pleas check transfer belt, and drum unit, probably these lines are caused by drum unit and you have to change it. also you can clean laser glass, what is under the drum unit. if both look fine you can also look at the fusing rollers.

May 14, 2008 | Konica Minolta Magicolor 2530 DL Laser...

1 Answer

Minolta 2300 dl laser printer fatal error 17H


had printer for approximately 2 years. Used daily in office setting. today the printer tried to print, then just stopped and it said fatal error 17H in the window. We cleared paper jam and rebooted, gives the same error message. Anything we can do?

Apr 14, 2008 | Konica Minolta Magicolor 2530 DL Laser...

2 Answers

White Lines


My magicolor 2430 dl prints fine until i print a photo then it leaves vertical streaks down the page, how do I correct this and if its dirty how do i clean it.
jim

Jan 27, 2008 | Konica Minolta Magicolor 2530 DL Laser...

Not finding what you are looking for?
Konica Minolta Magicolor 2530 DL Laser Printer Logo

224 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6161 Answers

Adorjani Laszlo

Level 3 Expert

1297 Answers

Ben
Ben

Level 2 Expert

108 Answers

Are you a Konica Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...