Question about Philips 60PP9202 60" Rear Projection HDTV-Ready Television

1 Answer

Problem with RGB color...registering as green and image distorted

My Phillips rear projection televsion, 60PP9202 model DPTV305F is distorting the image on the screen. It seems that the red, blue, and green color is projecting an image itself that offsets one another, creating a drop-shadow effect. Everything seems to be tinted green and there is a shadow of red that slightly offsets the image. I am assuming there is something wrong with the RGB controls of the television or a color convergence problem. I have read through some of the other submitions and it seems that others are having similar issues but I am not getting any progress. If the is anything you can do to lead me in the direction of fixing it I would greatly appreciate it. I would like to try to fix the television myself, is there anything I can do?

thank you very much for your help!

Posted by on

  • mwhite69 Apr 23, 2009

    I have a ghosting/shadowing on my Philips 60pp9202 tv. it shows 3 lines on my tv guide - one is white (normal), then there is a green line and red line. I have read that it could be the lamp/bulb or a convergence chip - i know nothing about either one, but I have tried locating the bulb for it and have been unsuccessful. Any help would be appreciated.

  • parkscharles May 26, 2009

    I have the same problem as the distorted image where the picture looks as if its two images instead of one. Plus the color is off. The top of the screen has lines as well as the bottom. To me it looks as though the picture tube is going out but I don't even know if this television has a picture tube since I don't have a manual on it.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Did u fix your tv cuz thats the same thing thats happening to me

Posted on Jun 01, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a dptv305f phillips tv and the color is almost foggy and it seems like the colors are really green or red


Very common problem caused by the CRT coolant needing replacement. You can get the phillips CRT coolant kit at www.tvrepairworld.com which also comes with instructions.

Jun 01, 2010 | Philips 60PP9202 60" Rear Projection...

1 Answer

Red Projection Is distorted


Convergence is dead.U know how to solders?Must replaced 2 convergence,and some or all it resistors.Tries websites Tv repair World.com,Tvrepairkits.com to buy a convergence kit to repair it ur self.The shop will cost u $300 for parts and labors.

Mar 05, 2010 | Philips 60PP9202 60" Rear Projection...

1 Answer

I have a Phillips projection TV Model# 60PP9202 Chassis # DPTV305F with a linear distortion problem. The colors are not aligning. Can I fix my TV myself, or do I have to take it in. Any advice would be...


It soundsa like you have a convergence problem. Probably only one color. (The green and red may be ok but the blue is bowed or any of those combinations) This will require the repklacement of convergence IC's and then alignment. Probably best to have a experienced tech take care of this.

Nov 26, 2008 | Philips 60PP9202 60" Rear Projection...

1 Answer

PHILIPS 60PW936317 - COLORS GOT DISTORTED AS I WAS WATCHING TV


Your convergence chips and convergence resistors are going bad. When they fail the screen colors will look distorted/3d looking.  Another symptom is one or more colors can't be converged using the convergence menu. You can purchase the parts over the internet. Just make sure you get Sanyo brand convergence chips and the correct flame proof resistors. You can also check the site www.TvRepairKits.com. They are working on a complete kit for this model.

Nov 12, 2008 | Philips 60PP9202 60" Rear Projection...

2 Answers

Colors distorted


u need to check the convergence ic first most of the time that is what is wroung with it and if u replace them yourself make shure u use heat sink grease on them or they will go out with in a month or so

Jul 23, 2008 | Philips 55PP9401 55" Rear Projection...

1 Answer

Convergence out power supply faulty for 46gw945 picture is distorted


You can get parts for your model by going to the following link and leaving them an email stating the model of your set and indicate which board you are needing. Heres the link
http://servicemanuals.vstore.ca/

May 05, 2008 | GE 46GW945 46" Rear Projection Television

1 Answer

Distorted image and color


sounds like the convergence ICs have failed. Will the red and blue move in all 4 directions when you try to adjust the convergence? If not the convergence ICs are bad replace both of them also check the resistors that power the ICs as they may be open as well.

Mar 12, 2008 | Sony KP-57WS510 57" Rear Projection HDTV

Not finding what you are looking for?
Philips 60PP9202 60" Rear Projection HDTV-Ready Television Logo

434 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74468 Answers

matt martin
matt martin

Level 3 Expert

1213 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...