Question about Silver Jeans Biometric Fingerprint Scanner Door Lock Silver Right

1 Answer

Keyless door lock

I found a perfect keyless door lock, that is toatlly keyless, it is keypad and store up to 20 user's code. you can give one of a code to contractor or neighbors or home exchanger and you can remove it in one minute. The lock does not have keyover ride and picking proof. go to keylesslock.net

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

But who has PARTS to service it after the sale?

I am very careful of what brands I carry, due to "dumping" on the us market.

Two solid products in this category:

Schlage BE365

PROS.... we have had no issues at all with the electronics, but the bolt is wimpy one size fits all design,,,, weak. We swap the bolt with a schlage COMMERICAL bolt to beef it up


Emtek E1000 Works similar to Schlage BE365 in programming procedures and features, but the build-quality is awesome, and the BOLT is heavy duty already as packed.... in fact, MEDECO now uses the same bolt in their 250.00 mechanical deadbolt.

The above two locks can be further enhanced by replacing the standard overide cylinders with MEDECO or MUL-T-LOCK cylinders, or disable the key override altogether, if desired.

Should a part fail, locksmiths nationwide have many of the parts that fit these on hand. You do not have to throw away another "as seen on ebay" unknown product that comes and goes away.

We sell the Emtek E1000 in many finishes for 130.00, so one does not have to sacrifice to get quality and support.

If this was helpful, please post a nice review for City Lock in Boulder Colorado listings on Google Maps, Yahoo etc. This listing will link you to my website as well. On my website are resources for finding a legitimate locksmith near you. Be sure you are hiring a REAL locksmith!

Thank You

Jeff



Posted on Jul 24, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I reset keyless door entry that is in lock out mode


Viper Keyless Entry Systems

https://www.viper.com/car/keylessentry/
Viper is the industry leader in keyless entry systems. Add the convenience of keylessentry to virtually any vehicle - even vehicles without power door locks!

Alarms, Remote Car Starters, Keyless Entry & Locks - JC ...

www.jcwhitney.com > Audio, Video & Electronics
20 out of 32 products in Alarms, Remote Car Starters, Keyless Entry & Locks ..... ofKeyless Entry & Car Alarms allow you to lock and unlock power door locks.
How to program your keyless entry keypad - Ford Ownerhttps://owner.ford.com/.../locks.../how-to-program...Ford Motor CompanyDiscover how to lock and unlock your doors and how to program memory settings that will adjust seats & mirrors for each driver.SecuriCode™ Keyless Entry Keypad - Ford Ownerowner.ford.com/.../locks.../securicode-keyless-entr...Ford Motor CompanyLearn how to set a 5 digit SecuriCode on the Ford keyless entry keypad. ... Sign out. Register/Sign In · Your Vehicle. Service & Maintenance. Service & .... vehicle's SecuriCode keypad to lock and unlock your doors without having to use a key. ... Thekeypad will go into an anti-scan mode if you enter the wrong code seven ...How Programming Your Keyless Entry Can Make ... - Ford Life

Jan 08, 2016 | Cars & Trucks

1 Answer

How do i change the code on this lock


How can I program my electronic keypad lock when the instructions with the programming code have been lost?The back plate of the keypad side of the lock on the exterior of the door has a sticker which includes the serial number, six digit programming code and two pre-programmed four digit user codes. The lock must be disassembled to a point the exterior of the lock can be pulled away from the door and the information on the sticker made note of.

This link will give you instructions for various models of Schlage locks:
http://consumer.schlage.com/Service-Support/Pages/InstructionandManuals.aspx

Good luck!

Jan 31, 2011 | Schlage Camelot Deadbolt Keypad, Satin...

1 Answer

How do I set the key pad to my on code on my schlage electronic keyless lock


How can I program my electronic keypad lock when the instructions with the programming code have been lost?The back plate of the keypad side of the lock on the exterior of the door has a sticker which includes the serial number, six digit programming code and two pre-programmed four digit user codes. The lock must be disassembled to a point the exterior of the lock can be pulled away from the door and the information on the sticker made note of.

This link will give you instructions for various models of Schlage locks, including the BE 365:
http://consumer.schlage.com/Service-Support/Pages/InstructionandManuals.aspx

Good luck!

Jan 13, 2011 | Schlage Lock BE365VCAM716 Electronic...

1 Answer

I have a 4 digit schlage keyless lock and want to reprogram it


How can I program my electronic keypad lock when the instructions with the programming code have been lost?The back plate of the keypad side of the lock on the exterior of the door has a sticker which includes the serial number, six digit programming code and two pre-programmed four digit user codes. The lock must be disassembled to a point the exterior of the lock can be pulled away from the door and the information on the sticker made note of.

This link will give you instructions for various models of Schlage locks:
http://consumer.schlage.com/Service-Support/Pages/InstructionandManuals.aspx
There's a video for reprogramming it.

Good luck!

Dec 20, 2010 | Schlage Locks & Locksmithing

1 Answer

I would like to program the schlage deadbolt keypad using my personal code.


How can I program my electronic keypad lock when the instructions with the programming code have been lost?The back plate of the keypad side of the lock on the exterior of the door has a sticker which includes the serial number, six digit programming code and two pre-programmed four digit user codes. The lock must be disassembled to a point the exterior of the lock can be pulled away from the door and the information on the sticker made note of.

This link will give you instructions for various models of Schlage locks:
http://consumer.schlage.com/Service-Support/Pages/InstructionandManuals.aspx
There is a video on that page.

Good luck!

Dec 18, 2010 | Schlage Camelot Deadbolt Keypad, Satin...

1 Answer

Installation information. Thanks


How can I program my electronic keypad lock when the instructions with the programming code have been lost?The back plate of the keypad side of the lock on the exterior of the door has a sticker which includes the serial number, six digit programming code and two pre-programmed four digit user codes. The lock must be disassembled to a point the exterior of the lock can be pulled away from the door and the information on the sticker made note of.

This link will give you instructions for various models of Schlage locks:
http://consumer.schlage.com/Service-Support/Pages/InstructionandManuals.aspx

Good luck!

Nov 28, 2010 | Schlage Camelot Deadbolt Keypad, Satin...

1 Answer

How to reset keyless locks


How can I program my electronic keypad lock when the instructions with the programming code have been lost?The back plate of the keypad side of the lock on the exterior of the door has a sticker which includes the serial number, six digit programming code and two pre-programmed four digit user codes. The lock must be disassembled to a point the exterior of the lock can be pulled away from the door and the information on the sticker made note of.

This link will give you instructions for various models of Schlage locks:
http://consumer.schlage.com/Service-Support/Pages/InstructionandManuals.aspx
There is a video on this page, showing how to change codes.

Good luck!

Nov 14, 2010 | Schlage BE365-CAM BE365CAM505 Lifetime...

1 Answer

Manual for changeing code


How can I program my electronic keypad lock when the instructions with the programming code have been lost?The back plate of the keypad side of the lock on the exterior of the door has a sticker which includes the serial number, six digit programming code and two pre-programmed four digit user codes. The lock must be disassembled to a point the exterior of the lock can be pulled away from the door and the information on the sticker made note of.

This link will give you instructions for various models of Schlage locks:
http://consumer.schlage.com/Service-Support/Pages/InstructionandManuals.aspx

Good luck!

Nov 12, 2010 | Schlage Camelot Deadbolt Keypad, Satin...

3 Answers

How do I reprogram the keyless entry keypad?


You can found the code on F-150 up under the dash. There is a sticker on a grey box. That is the code that you need to open the door. You can then use that code to program your own 5 digit code that you will remember.

For program your keyless pad (clic image), check the procedure in your 2006 Ford F-150 Owners Manual moz-screenshot.pngmoz-screenshot-1.png(page 108 and next).

ec44e90.jpg

Remember rated this help, good luck.

Feb 15, 2010 | 2006 Ford F-150

1 Answer

How to change the keypad code on a 2001 mercury grand marquis


look for the permanent code on the plastic card in the owner manual packet. Or, pay dealer to extract code from computer.

Keyless Entry Keypad Code Programming NOTE: The system only allows one code to be programmed.
  1. Enter the permanent factory keyless entry keypad code.
  1. Press the 1/2 button within five seconds to activate the programming mode. Holding the 1/2 button for more than two seconds after activation will erase the stored customer code . The door locks will lock, then unlock, confirming the code is erased. The existing code will not need to be erased to program new a code.
  1. Within five seconds, enter the new five-digit keyless entry keypad code. The door locks will lock and unlock to confirm the new code is programmed.

Feb 08, 2010 | 2001 Mercury Grand Marquis

Not finding what you are looking for?
Silver Jeans Biometric Fingerprint Scanner Door Lock Silver Right Logo

126 people viewed this question

Ask a Question

Usually answered in minutes!

Top Silver Jeans Locks & Locksmithing Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

ray gallant

Level 3 Expert

43095 Answers

Tom Chichester

Level 3 Expert

34217 Answers

Are you a Silver Jeans Lock and Locksmithing Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...