Question about MSI P7N Diamond Core 2 Quad/ Nforce 780i SLI/ FSB 1333/ RAID/ 3-Way SLI/ A&2GbE 7510010 Motherboard

1 Answer

Installed adaptec 5805, computer keeps rebooting.

Hi, i have a msi p7n diamond, and i just installed adaptec 5805 raid card. the computer keeps rebooting, tried everything that i can think of but without any luck. please help.

Posted by on

  • 2 more comments 
  • Anonymous Apr 16, 2009

    Thanks, MAD ICE for replying, the computer reboots after initializing the adaptec 5805 card, sometimes it shows me a screen to start windows in which mode, any mode i choose it will restart immediately..( safe, network or normal startup).

  • Anonymous May 11, 2009

    I have the same problem with the adaptec 2405. Do you have a nvidia chipset mobo? I think there could be a problem with it.

  • aaldoseri Sep 08, 2009

    hi, i found that the usb IRQ conflicts with the adaptec 5805, so i have disabled the usb controller from the bios and the adaptec card works fine now, i have to change the usb IRQ now but still didn't get to it yet.

  • Nasser Abou Agena
    Nasser Abou Agena May 11, 2010

    doest reboot right away after you turn it on or after 10 mins and sorry to hear about this issue

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 25 Answers

Here is some great PC solution by Some FIXYA EXPERT. Get any kinds of PC solution from bellow.

  1. Intel MotherBoard
  2. Mercury Motherboard
  3. Gigabyte Motherboard
  4. MSI Motherboard
  5. P5GC-MX/1333 Motherboard
  6. via

atttererawe22

Posted on Sep 08, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dell RAID controller in HP server? Hi i have dell (Adaptec) CERC SATA1.5/6ch RAID card, now i want to use this card in HP proliant ml150 g3 server, after fixing this card server did not recognize it keeps...


This particular device will require drivers for the Operating System to use. Also the hard disk drives will have to be installed an initialized outside the Operating System first before use. This is usually during startup after the system BIOS.

The exact steps can be found on the RAID card manufacturer's web site.

Feb 18, 2010 | HP ProLiant ML150 G3 Server

1 Answer

No post no beep


check your hard drive and make sure it's connected properly and set for master, not slave.

Feb 14, 2010 | MSI P7N Diamond Core 2 Quad/ Nforce 780i...

1 Answer

I am not able to get my computer to turn on could this be a problem with the cmos battery on the motherboard. Everything else works I tested them on another board


Hi valsol138,

All you need to do is go to a drug store and get a Energizer CR2036 battery and replace the one on the board.

Good Luck,

Mark

Sep 21, 2009 | MSI P7N Diamond Core 2 Quad/ Nforce 780i...

1 Answer

Can we install dot net in p3 1.3 ghz system


yes sure u can install the .Net Framework on your pc. after installation it may support your windows a bit, and your pc will be faster then before it is...

good luck

shafky

Jun 19, 2009 | MSI P7N Diamond Core 2 Quad/ Nforce 780i...

1 Answer

No beep,No Display on my monitor,only CPU heatsink fan is moving


You motherboard has onboard video. It's possible it needs to be disabled and the option changed to use the pci or pci-express slot for the Ati card you installed. Since you have no post error beeps this is the best place to start. Also I had built a system not to long ago and had a similar problem. Resetting the cmos on the motherboard (usually a pin combo) solved the issue.

Start by hooking up your vga cable to the onboard video.

Hope this helps.

Apr 07, 2009 | MSI P7N Diamond Core 2 Quad/ Nforce 780i...

3 Answers

I have a problem with my ram


That motherboard does not have a video circuit built-in, so the video sharing the system RAM does not make sense.

Have you checked the valid system memory configurations in your MSI manual pg 2-7 ?
Any chance that the bios is set for dual channel and you don't have equal chip sizes in the dual slots? Example : In dual-channel mode, equal size chips would go in slots 1 & 3 and in 2 & 4

Defective RAM is a possibility also.

Note1: Per MSI, all ram may not register correctly in windows unless 4 of the 2GB chips are used


Oct 25, 2008 | MSI P7N Diamond Core 2 Quad/ Nforce 780i...

2 Answers

MSI P7N Diamond and Nvidia GTX 260


You should have 3 PCI-E 16X.  Put it in another slot.
James Mac

Sep 09, 2008 | Intel Motherboard

Not finding what you are looking for?
MSI P7N Diamond Core 2 Quad/ Nforce 780i SLI/ FSB 1333/ RAID/ 3-Way SLI/ A&2GbE 7510010 Motherboard Logo

Related Topics:

173 people viewed this question

Ask a Question

Usually answered in minutes!

Top MSI Computers & Internet Experts

vsri9

Level 2 Expert

73 Answers

David
David

Level 3 Expert

778 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Are you a MSI Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...