Question about Hotpoint 24 in. DWF32P Free-standing Dishwasher

1 Answer

Eco light keeps flashing won't fill with water

Will work on pre wash, cleaned filter salt and rinse aid ok

Posted by on

  • Dennis_bobby May 01, 2009

    when on the lights flash but it will not fill with water, could this be the solenoid?. model dc27 hotpoint slimline

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 297 Answers

Something with the program module , get a technician if worthwhile.
The flow dection (expensive can't be) because pre wash gets water supply. Might be loose wire or broken button. Any handy guy around that can cautious open then model behind the panel and chreck connections. I fixed mine last year with a dot of 2 component glue because of broken switch. Unluckily, the flow detector broke after 10 years (interconnected with automatic water stop

Posted on Apr 15, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What do these mean on a zanussi dishwasher model DE 6854


The top light is apparently to indicate that the salt (!) has run out.

The bottom light is apparently to indicate that rinse aid has run out.

For the record, that seems to be a Zanussi DE-6854 dishwasher, and I found the manual here: (link)


"Special salt can be added in one of two ways: 1) If you are using dishwasher detergent that already contains salt, the detergent including the salt is placed in the detergent compartment. - In this case the water softener must manually be set to 1 and electronically to 1 to ensure that the special salt is taken from the detergent container only. 2) If you are using dishwasher detergent and salt separately, the special salt is to be put into the salt container. - In this case the water softener must manually be set to 1 or 2 and electronically between 1 and 5 (depending on the water hardness in your area) to ensure that the special salt is taken from the salt container only. Only use salt specifically designed for use in dishwashers. All other types of salt not specifically designed for use in a dishwasher, especially table salt, will damage the water softener. Only fill with salt just before starting one of the washing programmes. This will prevent any grains of salt or salty water, which may have been spilt, remaining on the bottom of the machine for any period of time, which may cause corrosion." (Page 6)

"Only use branded rinse aid for dishwashers. Never fill the rinse aid dispenser with any other substances (e.g. dishwasher cleaning agent, liquid detergent). This would damage the appliance." (Page 7)

The manual also explains how to turn the Rinse Aid light off permanently if you do not wish to use rinse aid.



Good luck!

Mar 23, 2013 | Dishwashers

1 Answer

What do these lights mean there not going off


The top light is apparently to indicate that the salt (!) has run out.

The bottom light is apparently to indicate that rinse aid has run out.

For the record, that seems to be a Zanussi DE-6854 dishwasher, and I found the manual here: (link)


"Special salt can be added in one of two ways: 1) If you are using dishwasher detergent that already contains salt, the detergent including the salt is placed in the detergent compartment. - In this case the water softener must manually be set to 1 and electronically to 1 to ensure that the special salt is taken from the detergent container only. 2) If you are using dishwasher detergent and salt separately, the special salt is to be put into the salt container. - In this case the water softener must manually be set to 1 or 2 and electronically between 1 and 5 (depending on the water hardness in your area) to ensure that the special salt is taken from the salt container only. Only use salt specifically designed for use in
dishwashers. All other types of salt not specifically designed for use in a dishwasher, especially table salt, will damage the water
softener. Only fill with salt just before starting one of the washing
programmes. This will prevent any grains of salt or salty water, which
may have been spilt, remaining on the bottom of the machine for any period of time, which may cause corrosion." (Page 6)

"Only use branded rinse aid for dishwashers. Never fill the rinse
aid dispenser with any other substances (e.g. dishwasher
cleaning agent, liquid detergent). This would damage the
appliance." (Page 7)

The manual also explains how to turn the Rinse Aid light off permanently if you do not wish to use rinse aid.



Good luck!

Mar 23, 2013 | Dishwashers

1 Answer

Miele W1926 check inlet light flashes at he end of rinse fill


Hi Yugin.That indicates your machines water inlet valve is faulty.(Means it's taking less water then normal)Please check this steps & do it fast before water inlet is finishes:1-Turn your machine on & run empty with pre-wash cycle first.2-Please ajar the detergent drawer & check runing water on compartment one 3-Please press pre-wash button & compare the running water volume on compartment two.If the running water volume 1 is less then 2 or vs.water valve needs to be replace.That's causing problem.I hope that helps.Thanks.

Jul 26, 2010 | Miele W1926A Front Load Washer

1 Answer

Filters clean, arms unblocked, salt and rinse-aid ...


Yes! you are already having the answer. check your water inlet flow. Clean the strainer at the machine water hose connecting end.

Check the drain filter also. Refer user guide for instructions on cleaning.

May 19, 2010 | Dishwashers

1 Answer

Hello. My dishwasher has been pretty perfect for four years. When my house water softener ran out of salt, I added rinse aid and salt to the dishwasher for the first time. I subsequently added salt to the...


Try cleaning the machine by adding white vinegar to the wash water (before the water-fill procedure finishes). Put your stained dishes and cutlery in with the wash to remove the hard water deposits. The combination of salt and rinse aid may have helped cause this problem. Hope this helps!

Feb 11, 2010 | Dishwashers

2 Answers

Film on dishes and inside stainless steel panel


You live in a hard water area. Even though dishwasher tablets have salt included you may have to fill the machine with extra salt. (its the large srew top cap in the bottom of your machine, open it and fill it with dishwaher salt your machine came with a large funnel to help you do this) you will have to remove the bottom drawer to do this. next make sure you have rinse aid installed in the door of your machine, next to where you put the tablets in (don't buy cheap rinse aid it's not worth it) when its full of rinse aid the indicator will turn dark, will need both salt and rince aid about every 30 cycles.

Nov 05, 2009 | Miele Optima G2470SCVi Built-in Dishwasher

1 Answer

Pre-wash light keeps flashing


The pre wash light flashing is usually an indication that the washer has failed to take in cold water, possibly due to low pressure, or restricted inlet hose.
If it does it when it is the rinse mode, then I would suggest you check the filter is not blocked.
Remove lower rear panel, remove large black hose to bottom of tub
Remove filter inside and clean., check inlet to pump as well.
Plz rate my solution.
Thanks.

Jan 28, 2009 | Washing Machines

1 Answer

Dihwasher not working


I had a hotpoint engineer try to fix this type of problem.
He insisted that there was something stuck in the bottom of the pump.

Sure enough there was.
1. Unplug your dishwaser at the wall.
2. Remove the grill under the bottom rack.
3. Ensure that the filter is free from food and other obstacles and clean the filter.
4. Before replacing filter etc, get a piece of metal coat hanger wire and care fully insert it down the channel under the filter to free any lodged items. You may also see a small white impleller try to turn this with your finger or the coat hanger wire (this is the info from the engineer!).
5. replace filter and retry a wash.

This routine fixed or machine twice and will hopefully fix yours!

Don't forget to rate me!

fyi
The third time about 1 year later this occured again and even hotpoint gave up as they could not fix the machine. (after multiple visits). I think that the two flashing lights are were a red herring and the dishwasher had a separate intermitten fault. Hotpoint replaced the unit for a mimum charge. Callout + 40








Feb 27, 2008 | Hotpoint 24 in. FDW60 Free-standing...

1 Answer

HELP WITH NON FUNCTIONING DISHWASHER


similar problems here, repair man says its fine but the salt light was on so i added salt and works ok now. Some dishwashers don't function properly without the salt and rinse aid, even though you're pills may have then included, you still have to add them seperately, dumb but necessary at times.

Feb 27, 2008 | Dishwashers

Not finding what you are looking for?
Hotpoint 24 in. DWF32P Free-standing Dishwasher Logo

197 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Dishwashers Experts

AcmeUK

Level 1 Expert

25 Answers

yadayada
yadayada

Level 3 Expert

74896 Answers

Brad Brown

Level 3 Expert

15441 Answers

Are you a Hotpoint Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...