Question about Canon PIXMA iP1300 Printer

3 Answers

Ink cartridges cannot be recognized in canon printer

I am having canon pixma ip1300 inkjet printer.
it worked properly till 13th april 09
i got refilled both cartridge and fix it in my printer
but the cartridge was not recognized.
i had tried installing the cartridge many times and also tried switch off and on it again many times but the printer shows the same error that
"An error occurred.Some ink cartridges cannot be recognized."
and a message box is opened and it shows that
"An ink cartridge is not installed properly.Open the printer's cover, make sure the ink cartridge is installed properly, and close the cover."

help me to recover from this problem i can't afford to buy new cartridges.
suggest me some ideas and procedures to make my printer work again.
give me the remedy as quickly as possible

Thank you

Posted by on

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 232 Answers

Hello!
Remove the cartridges and gently wipe the cartridge contacts with a dry cloth, then put them back in. Then, hold the "resume" button for 10 seconds for each cartridge, that should reset them.
If that doesn't work, one of your cartridges (sadly) needs to be replaced.

Posted on Apr 11, 2010

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

I am having canon pixma ip1300 inkjet printer.
it worked properly till 13th april 10
i got refilled both cartridge and fix it in my printer
but the cartridge was not recognized.
i had tried installing the cartridge many times and also tried switch off and on it again many times but the printer shows the same error that
"An error occurred.Some ink cartridges cannot be recognized."
and a message box is opened and it shows that
"An ink cartridge is not installed properly.Open the printer's cover, make sure the ink cartridge is installed properly, and close the cover."

Posted on May 01, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Where is my solution posted? You're
asking me if the solution solved my problem & I haven't seen your solution.

Posted on Oct 26, 2013

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: the ink cartridge cannot recognized (refilled 3 times)

i am having canon pixma ip1300 inkjet printer. it worked properly till 13th april 09 i got refilled both cartridge and fix it in my printer but the cartridge was not recognized. i had tried installing the cartridge many times and also tried switch off and on it again many times but the printer shows the same error that "An error occurred.Some ink cartridges cannot be recognized." and a message box is opened and it shows that "An ink cartridge is not installed properly.Open the printer's cover, make sure the ink cartridge is installed properly, and close the cover." help me to recover from this problem i can't afford to buy new cartridges. suggest me some ideas and procedures to make my printer work again. give me the remedy as quickly as possible Thank you

Posted on Aug 08, 2009

  • 2 Answers

SOURCE: problem with my canon printer ip1300

You can try this it works for my 1500 printer.
Go to the printer settings and turn off the ink low messages.
Switch your printer on and hold the paper feed switch down for the count of five the orange light should flash. Then switch off the power and switch back on again the green light should stay steady. If you do not come right on this one you can email me at grayjem@mweb.co.za

Posted on Aug 10, 2009

MUKHTAR
  • 2017 Answers

SOURCE: i am having canon pixma ip1300 inkjet printer.

try to clean the print head.but it is adviseble use genuine catridges.

Posted on Dec 29, 2009

  • 1 Answer

SOURCE: i am having canon pixma ip1300 inkjet printer.

I have a brand printer canon pixma ip 1300. but can not print. Ink is made details can not be displayed. and the document pending for administrator

Posted on Jan 02, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cannot recognized ink in my canon pixma ip2770


i am having canon pixma ip 2700 inkjet printer. it worked properly till. I got refilled both cartridge and fix it in my printer but the cartridge was not recognized. i had tried installing the cartridge many times and also tried switch off and on it again many times but the printer shows the same error that "An error occurred.Some ink cartridges cannot be recognized." and a message box is opened and it shows that "An ink cartridge is not installed properly.Open the printer's cover, make sure the ink cartridge is installed properly, and close the cover." help me to recover from this problem i can't afford to buy new cartridges. suggest me some ideas and procedures to

Aug 31, 2012 | Canon Office Equipment & Supplies

Tip

I am having canon pixma ip1300 inkjet printer. it worked properly till 13th...


Hello,

Things you will need.
Needle nose pliers.
Paper towels
97% rubbing alcohol
Plastic gloves.
Flashlight
Disposable waste container, lined with plastic.
Disposable plastic tray about 6x9 or thereabouts.
Plenty of ventilation, outside if need be.

a. With the printer on, open this lid as if to change cartridges.

b. Turn Printer off. Unplug the printer. Unattach the communication cable. You will be moving it to a work area with excellent ventilation, such as outside.

c. At the far right where the the cartridges normally park themselves when not printing you will see a platform with rectangular compartments. When the cartridges park, this platform rises, seals off the nozzle area and captures any leaking ink, which till happens today.

d. Examine the platform with your flashlight and you will see what looks like sponges in the compartments. This material with holes in it, like a sponge, is plastic.Put on your gloves.

e. Place a paper towel folded over on itself underneath this platform as best you can to catch any spilling ink.

f. Use paper towels soaked in alcohol slightly and your needle nose pliers to push
the paper towel into each compartment, gently at first, until the majority of ink is
removed.

g. This will take quite a long time and plenty of paper towels and patience. So be
patient and ready for the long haul. Avoid smoking and the fumes.

h. At some point the sponge material, itself, may become dislodged and loose.

When you witness this, go ahead and remove it carefully using your needle nose
pliers and place it on some paper towels placed inside your disposable plastic tray.

i When you have one or both, if needed or more sponges removed and in the tray,
pour alcohol over these until the ink runs pretty thin. Leave to everything to dry.

i. Use a paper towel damp with alcohol and your pliers to clean out the compartment and its sides as best you can.

j. When you have completed these tasks allow the compartments and sponges to dry.

k. You are ready to reassemble the sponges into the compartments. Do so now.

l. Nearly done; take a towel wet with alcohol and hold it very gently against the bottom of the ink cartridge until ink flows freely onto the paper towel. If its stubborn, knock

the cartridge gently but sharply against a hard surface with the alcohol soaked towel held against the nozzle area.

k. Re insert the cartridges now.

l. Return the printer to its working location, attach power, attache the comm cable and with the lid closed apply power.

m. Run your printer through its normal setup routine, deep clean the print heads, run a nozzle check and finally do a print head alignment.

m. Your Printer is now ready to be used again.

Thank you,
Worldvet

on Apr 15, 2009 | HP Officejet 5610 All-In-One InkJet...

1 Answer

My new pixma canon ip 2770 cannot recognize the black and colored ink


i am having canon pixma ip 2700 inkjet printer. it worked properly till. I got refilled both cartridge and fix it in my printer but the cartridge was not recognized. i had tried installing the cartridge many times and also tried switch off and on it again many times but the printer shows the same error that "An error occurred.Some ink cartridges cannot be recognized." and a message box is opened and it shows that "An ink cartridge is not installed properly.Open the printer's cover, make sure the ink cartridge is installed properly, and close the cover." help me to recover from this problem i can't afford to buy new cartridges. suggest me some ideas and procedures to

May 08, 2011 | Canon Pixma iP2700 InkJet Photo Printer

1 Answer

Problem with my canon printer ip1300


You can try this it works for my 1500 printer.
Go to the printer settings and turn off the ink low messages.
Switch your printer on and hold the paper feed switch down for the count of five the orange light should flash. Then switch off the power and switch back on again the green light should stay steady. If you do not come right on this one you can email me at grayjem@mweb.co.za

Aug 10, 2009 | Canon PIXMA iP1300 Printer

3 Answers

Cartridge not installed properly


Need to make sure that is is on there firm and snap in the right way.

Jun 25, 2009 | Canon PIXMA iP1300 Printer

1 Answer

An Ink cartridge is not installed properly and the ink cartridge cannot be recognized


buy 1liter of gasoline and pour it on your IP1300 and then fire it up... I have the same problem and I already solved it! Canon is wasted!!! Just buy other brand.

Apr 21, 2009 | Canon PIXMA iP1300 Printer

1 Answer

Canon ip1600


Dear hoppygink,
Canon pixma ip1200 series (ip1200,1600,2200) identify the first new cartridge installed in the printer and detects ink level properly unless you put another used cartridge or you its own cartridge to another printer. Once you do this, ink level of the cartridge become unknown. So, never exchange its own cartridge with another ip1600 printer. This will be back to normal condition when you replace with new fresh one catridge that never used before. This weakness has been improved by canon in pixma ip1300 series (ip1300 & 1700) anyway.
To prevent this problem occurs, you need to back up EEPROM data of the printer by using EEPROM restore tools before perform cartridge exchange. I will discuss this in Canon Inkjet Forum in the next coming chance. Please send me your email to: ijxpert@gmail.com so I can notice you immediately after posting the topic.
Regards,

Dec 12, 2008 | Canon PIXMA iP1600 Printer

2 Answers

Canon pixma ip 1300


Make sure the cartridge is seated properly in the correct place. If the cartridge is a refilled compatible, throw it in the bin and get a new one. Approx 30% of compatibles can be faulty.

Jul 16, 2008 | Office Equipment & Supplies

Not finding what you are looking for?
Canon PIXMA iP1300 Printer Logo

9,781 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1921 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...