Question about Office Equipment & Supplies

2 Answers

LCD screen is on, not in hibernating mode but does not show any letters, derections, description

I do experience a problem with the LCD screen of my PIXMA MP520. The screen is not switched off or in a "hibernating mode" but does not show any letters or numbers, it is just blank. Who can help? Thank you U Kessler Windhoek, Namibia

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 36 Answers

Take this way
http://www.chargeconverter.com/shop/conndev.htm

and follow my experience
https://sites.google.com/site/bricolagesetc/imprimante-pixma-520

Posted on May 24, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I think you have a lose connection caused by rotation of the flip up lcd screen. My MP520 does the same, but the characters display half way down when closing. I have not got round to opening it up to get to the guubings yet.

Posted on Dec 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What could be wrong with my pc monitor,I turned it on and the screen is blank


it is always best to be as descriptive as possible and give as much info as you can about your problem. is it a laptop or desk top? is it a new display added to a desktop? if it is a desktop and the screen is blank after you turn it on, most likely the cable to the pc is not firmly connected (i've done this many times when setting up a new system) or it could also be that the system has gone into Hibernate mode and moving the mouse or pressing the space bar or escape key could bring it out of hibernate mode. Hibernate mode goes active when the system has been idle for a long time without any keystrokes or mouse activity. hope this helps

Apr 10, 2013 | Computers & Internet

2 Answers

F buttons description


F1 - Security System

1

Press and hold the "Fn" key on the lower left-hand corner of your Toshiba keyboard.


2

Press the "F1" key to activate the security system.


Your laptop's screen will go blank so others can't see what you are working on or accessing.


Sponsored Links

Computer Repairs (Melb)


No Fix, No Fee. Same Day or Free. We Come To You - 1300 723 628

www.thepcdoctor.com.au/melbourne


3

Press any key or touch the touchpad to exit the security mode.


F2 - Power Save Mode

4

Press and hold the "Fn" key.


5

Press the "F2" key to activate the Power Save mode and make changes to how your laptop handles operating on battery or AC power.


6

Press "Fn" and the "F2" key again to exit the power save mode.


F3 - Standby Mode

7

Press and hold the "Fn" key.


8

Press the "F3" key to place your laptop in Standby mode.

The Standby dialog box will appear.


9

Verify you want to enter Standby mode. Press the power button on your Toshiba laptop to exit Standby mode.


F4 - Hibernation Mode

10

Press and hold the "Fn" key.


11

Press the "F4" key to activate the Hibernation mode and save whatever documents and files that are open to your hard drive.


12

Verify you want to enter Hibernation mode. Press the power button on your Toshiba laptop to exit Hibernation mode.


F5 - Active Display Device/F6 and F7 - Toshiba LCD Screen Brightness

13

Press and hold the "Fn" key.


14

Press the "F5" key to change your laptop's active display device from the laptop screen to an external monitor.


15

Click on the display configuration you want: displaying on both the laptop and external monitor; only on the laptop; only on the external monitor; or a specific screen resolution.


16

Press and hold "Fn" and "F5" to accept the new display settings. Press and hold "Fn" and "F5" again to return to your laptop's display only.


17

Press and hold the "Fn" key.


18

Press the "F6" key to decrease your laptop's screen brightness. Press the "F7" key to increase the brightness.


F8 - Wireless Connection/Bluetooth

19

Press and hold the "Fn" key.


20

Press the "F8" key to select the wireless Internet or Bluetooth connection you want to use.


21

Press and hold "Fn" and "F8" to make your selection. Release the keys to confirm your selection.


F9 - Touchpad Control

22

Press and hold the "Fn" key.


23

Press the "F9" key to enable your laptop's touchpad.


24

Press and hold "Fn" and "F9" again to disable the touchpad.


F10 and F11 - Numeric Keypad/F12 - Scroll Lock

25

Press and hold the "Fn" key.


26

Press the "F10" key to enable your Toshiba laptop's numeric keypad.


27

Press and hold "Fn" and "F11" to enable the cursor control keys on the numeric keypad.


28

Press and hold the "Fn" and "F10" or "F11" key to disable the numeric keypad or cursor control keys.


29

Press and hold the "Fn" key.


30

Press the "F12" key to lock your cursor on a specific line of text. Press and hold "Fn" and "F12" to turn scroll lock off.


hope this helps




Sep 25, 2012 | Toshiba Satellite A100-S8111TD Notebook

1 Answer

When I take my laptop out of hibernation mode, it automatically (almost 95% of the time) goes to a blue screen with very tiny lettering and then re-boots itself. After the re-boot, things seem to be ok.


It's crashing when you take it out of hibernation. Try not to use hibernation mode, in my experience it's more trouble than it's worth , especially with laptops. Also do a search for problems relating to hibernation on your laptop (ie your make and model), there should be a solution out there somewhere, and try the support section of the manufacturers website.

Feb 04, 2011 | Computers & Internet

1 Answer

When turned on says no signal and screen does not light up is there a reset button this is monitor that is being switched to different computer HP computer


PC may be in hibernation mode or with power plug out f PC remove refit video card if it has one.

Try booting into safe mode then disable hibernation mode found in "power options"

Dec 04, 2009 | ViewSonic VX900 19" Flat Panel LCD Monitor

2 Answers

Half of the screen is black - Samsung SynchMaster 710N


hello
I am a technician-informatic. I have repaired about 80 Lcd Samsung monitors with theese problems. I offer the repair manual.
Manual has been done with the experience of the repairing Samsung Lcd monitors. Manual was made by me and shows how to open monitor, how
to solve dark screen problem, how to check and replace capacitors, how to solve the problem non-optimal mode (without reprogramming MCU or
changing the main board) photo are included. 100% functional. The repair process is very simple 30-40min. (does not need a lot of
experience in electronics and expensive instruments) and is not expensive. With this manual you can solve problems by yourself and save
money.

"Not Optimum Mode 1280x1024 60Hz"
- The monitor turns on but turns off by itself, the LED blinks green.
- If you detach from the PC points to "control cable" the picture runs continuously in the vertical direction or presents while line , and
as soon as it is reconnected, the monitor goes off.
- The monitor does not turns on and dont dispaly anything, the LED blinks green-lit, if you detach from pc points to "control cable".
- The monitor turns on, works well some time, but after a window apiers "Not optimum mode. Mode recommended 1280X1024 60Hz"
- The monitor turns on, works well only with low resolution 800x600, when try to change a window that reads "Not optimum mode. Mode
recommended 1280X1024 60Hz"

the manual you can find on ebay (my ebay name is asnerejas123):
Samsung monitor repair manual guide 710n,913v,510n more
220498646211
Riparazione - repair Lcd Samsung monitor 710n,913v,510n
220498645860
Reparaturhandbuch für Samsung 710n,913v,510n und andere
220499443698

Sep 05, 2009 | Samsung SyncMaster 710N 17" LCD Monitor

1 Answer

Hiberation mode ,,what do i do/


Hello,

Hibernate mode is a power saving feature for computers. In hibernate mode, the current state of a computer is saved to the hard disk, and the computer shuts down. A user will have to power on the computer to restore the previous settings. When a computer resumes from hibernate mode, it reads the saved settings from the disk and restores the system state as it was before it entered hibernate mode. By default, hibernate mode is disabled. If a computer is not ACPI-enabled or APM-enabled, users will have to enter hibernate mode manually. Users cannot set the computer to automatically hibernate after a certain time. With ACPI-enabled and APM-enabled computers, users are able to set hibernate mode automatically

How to enable Hibernate:
Please follow this steps below to enable your Hibernate features:

1. Go to Main screen in your windows then right click your mouse to an empty area in your main menu.
2. After clicking the right click please select the properties then go to Screen Saver Tab.
3. Please Click the Button name Power then click the Hibernate Tab.
4. Please check the CheckBox name Enable Hibernation to enabled the hibernation if it is not hibernated.
5. To try test the Hibernate process please follow the steps in How to start using Hibernate below.

How to start Using Hibernate:
Please follow this steps below to active your Hibernate Features:

Make sure all necessary programs are closed prior to shutting down. Hibernating will put all programs to "sleep," but some programs won't start up properly. Experiment after this to figure out which programs perform as intended.
  1. Click Start and Shut Down,
  2. Point the standby button and maintain the shift key pushed,
  3. A new hibernation button appears: click it while still holding the shift key: voila your PC will hibernate.
Thanks

Aug 07, 2009 | Averatec C3500 Tablet PC

1 Answer

Computer was in hibernate or sleep mode when the battery drained. Now, will not boot, appears to come out of sleep mode but only shows TOSHIBA splash screen and the hard drive lights do not activate. F8...


Dear! take display properties use tab ans select screen saver then click on power and use tab again select hibernate if it is enable check again it and disable now. After that your computer will not go in sleep or hibernate mode.
Thank You

Jul 26, 2009 | Toshiba Satellite M100 Notebook

1 Answer

Pavilion Dv1000 monitor won't show anything


Power management lets you reduce your Notebook power consumption. Your Notebook has two power management modes:
  • Hibernation is an energy-saving feature and safeguard that saves information to the hard drive, then turns off your Notebook. When you resume from Hibernation, your information returns to the screen where you were previously working. Your Notebook hibernates when the Power button is pressed, when the battery has little power left, or when your Notebook (operating on battery power) is in Sleep mode for more than one hour.
  • Sleep, also called Standby, is an energy-saving feature that reduces power to system components that are not being used. When Sleep is initiated, your information is saved in Random Access Memory (RAM), and the screen is cleared. Your Notebook is still on, but the display is blank. When you resume from Suspend, your information returns to the screen where you were previously working.
Automatically put your notebook into hibernation Windows can automatically put your computer into Hibernate mode after a specified period of inactivity. Or Windows can detect when your batteries are running low, and then automatically put your computer in Hibernate mode to save your work before the battery fails. NOTE: Using Power Options in Control Panel, you can adjust any power management option that your notebook's unique hardware configuration supports. Because these options may vary widely from computer to computer, the options described may differ from what you see. Power Options automatically detects what is available on your computer and shows you only the options that you can control. To automatically put your computer into hibernation:
  1. In Category view, click Start , click Control Panel , click Performance and Maintenance , and then click Power Options . In Classic view, click Start , click Control Panel , and then click the Power Options icon.
  2. Click the Hibernate tab, select the Enable hibernate support check box, and then click Apply . Figure 1: Enable hibernation check box c00035872.gif
  3. Click the Power Schemes tab, and then select a time period in System hibernates. Your computer hibernates after it has been idle for the specified amount of time.
Manually put your notebook into hibernation This feature is available only on notebooks with the Windows XP operating system installed.
  1. In Category view, click Start , click Control Panel , click Performance and Maintenance , and then click Power Options . In Classic view, click Start , click Control Panel , and then click the Power Options icon.
  2. Click the Hibernate tab, and then select the Enable hibernate support check box. NOTE: If the Hibernate tab is not available, your computer does not support this feature.
  3. Click OK to close the Power Options dialog box.
  4. Click Start , and then click Turn Off Computer . In the Turn off computer dialog box, hold down the Shift key. The Stand By button will change to Hibernate. Click Hibernate .

Jan 06, 2009 | HP Pavilion dv1000 Notebook

1 Answer

Horizontal distortion, on the bottom half of the screen


By your description, you have a defective LCD. LCDs should have no linear distinctions and at best yours is having a problem with the inverter/cabling.

Reseat the cables, if using an adapter, see if you can try without one. Try a different video source. If issue remains, then have LCD serviced under warranty.

Oct 27, 2008 | Neovo X-17AV 17" LCD Monitor

2 Answers

Hibernating


go to power options got to hibernation tab then untick enable hibernation . then reboot

Dec 04, 2007 | Computers & Internet

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

269 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

75197 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...