Question about Panasonic KX-T7453 Corded Phone

4 Answers

How do I set the time and date on the phone and change voice mail

I need to change the date and time on phones and I need to change someones voice mail message, how can I do this

Posted by on

  • 1 more comment 
  • zettalee1 Nov 06, 2007

    I have the same problem. I cannot change the time on my Panasonic KX-T7453 phone system. I have tried it all ways that I can think of and followed the directions below to a tee, but nothing. Please help!

  • mlnord Mar 11, 2008

    I've followed both sets of instructions (after FINALLY locating Jack 01, not where someone with half an ounce of logic would've put it).

    I did the PROGRAM **1234 for the default password. It just beeps at me. If I progress to the pressing SP-PHONE, Well, I just get the Speaker Phone.

    I did find instructions for pressing PROGRAM *# (it's supposed to say program at this point) 000# (to follow the menu prompts). Just beeps at me. Now that instruction did say "go to your extension 101 phone, but it's connected to Jack 05 - I know, logic).

    I also tried the PROGRAM 99 to get into the programming mode and then variants of the above. Nada.

    Stupid phone. I'd contact our rep, but by the time he gets back to me (I called him 2 years ago for a quote on a new VM system and never did hear back from him) whatever old programming is in there will kick in and the time will be correct. Politicians obviously don't have a Panasonic phone - that or they just have someone who does all this stuff for them.

  • Anonymous Mar 30, 2014

    when I set the correct time my phones change it back one hour



4 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 20 times.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 8 Answers

You must be on the main phone on jack 01 to set time. You can determine if your phone is jack 01 by pressing PROGRAM 99 on a display phone and then pushing the number 6 on the dial pad. The phone will read the jack and extension number. When you have determined the jack 01 phone, do the following: Press PROGRAM * * 1234(Default password is 1234. yours may have been changed) Press SP-PHONE 2 Times. To change the year enter the two digit year. If it is correct press FWD/DND to move the flashing indicator. MONTH is changed by pressing the AUTO ANSWER /MUTE key. DAY is entered as 1 or 2 digit day. DAY OF THE WEEK is entered by pressing the AUTO ANSWER/MUTE key. Press STORE to save your changes. Press SP-PHONE Enter 2 digit hour (Hour is flashing). Press FWD/DND button(Minute starts flashing). Enter 2-digit minute(Minute is flashing). Auto Dial/Store Button New time is stored. Lift handset and hang up to leave programming mode

Posted on Sep 16, 2007

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

We have changed our password, BUT our new password did NOT work for changing time/date...I had to use 1234...and that worked!

Posted on Nov 02, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You say "click Next" where is this button

Posted on Nov 07, 2007

I just did mine! Go to the main extension. Press Program. Press * then # then 1234. Click Next until you reach the time. Change accordingly then press Auto Dial/Store to save changes. This should change all phones' time.

Posted on Nov 07, 2007

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Bell complaints

please go to setting and select defolult setting and slove the prolbme

May 24, 2014 | Computers & Internet

1 Answer

My phone keeps sending everything to voice mail, but i want it to just go to regular answering machine, how do i change it? The red light at the bottom next to voice mail is on. I've looked through the...

You'll need to find out from your phone service provider how to disable or change the settings on your voice mail. The service is part of your phone line and has nothing to do with the phone, so it's not covered in the manual. Normally the phone service provider gives you a set of instructions (or provides them on their website) explaining how to use the features on your line.

You typically enter "star codes" (*72, for instance) to enable a feature or change its settings. Voicemail usually has two modes: "busy", where it will pick up a message if your line is in use, or "no answer", where the voicemail picks up after a set number of rings. You would want to choose "busy" so that your home answering machine will take the call when you aren't on the phone, and voicemail only kicks in if someone else calls while the line is already in use.

Contact your service provider and they should be able to tell you the magic codes for your system.

Feb 27, 2011 | AT&T DECT 6.0 Cordless Phone System with...

1 Answer

Motorola RAZR V3:Can't delete each and every voicemail (new or stored) when directed to press #7. Also can't prevent hearing the date and time for each voicemail. What is the solution?

hearing the date and time for each voice mail is adjusted using your carriers voice mail options. as for deleting each voice mail, it usually requires that you push 7 to save a voice mail and 9 to delete

Sep 07, 2010 | Motorola Mobility RAZR V3i Cellular Phone

2 Answers

I want to change my voice mail and whenever someone tries to call me it goes straight to voice mail what can i do about this?ive got samsung c3050

The scenario that you describe is typically caused by voicemail service on the carrier's side of the network. The majority of the time, a call being routed directly to voicemail is due to the phone not being 100% recognized on the network (perhaps this is a phone that is replacing a phone on existing account / number?) or roaming is not supported. Some forwarding modes may contribute, but not usually direct to voicemail unless you have inadvertently forwarded to voicemail explicitly.

Jun 22, 2010 | Samsung C3050 Cell Phone

2 Answers

Change date and time of voice mail

What type of voicemail system?

Jan 13, 2010 | Lucent Lands Phones

1 Answer

How to Change Voice Mail Time and Date

if you have an elite ipk system,time and date are changed at the attendant position.hit the feature key dial #

Feb 03, 2009 | NEC DTU 8D-2 Corded Phone

2 Answers

HOw to change time and date and names

Setting date and time is an administrator function-you cannot do this from your desk phone. The administrator needs to go into voice mail service-enter mailbox # and passwords-to the #2-schedule-choose1 update system date and time.

Aslo to change the name labels for an extension is an administrator function. From mail console-choose- Menu-Sys program- Exit -More- Labeling- Directory-Extension-Enter extension #-Use letters on screen and letters on switchboard phone –letters in red on labels to enter name. Somewhere you should have a "letter key" in the Voice Mail manual, IF your administrator doesn't have them written on the console phone. Each letter is assigned a 2 digit number to spell out their last name or dept, whichever label you want.
Letter key:
A=21 B=22 C=23 D=31 E=32 F=33 G=41 H=42 I=43 J=51 K=52 L=53 M=61 N=62 O=63 P=71 Q=74 R=72 S=73 T=81 U=82 V=83 W=91 X=92 Y=93

Feb 12, 2008 | Lucent Merlin Legend MLX-20L Phone

2 Answers

How to put my extension back into to system at greeting time

If you change recordings on a voice mail box that does not change the settings for the mail box location. There will be a section to enter the name of the mail box owner (not a recording) and that is used for the directory.

I am not familiar with NEC voice mail systems but typically you can have different voice mails and different versions of phone system that all program differently. You should have an "administrator" guide for your voice mail so someone can make changes like this. I have no way of helping you find this and it will depend on your voice mail NOT the model number of your phone which can be used with different systems and voice mails that all program differently.

Jan 22, 2008 | NEC Electra Elite DTU 16D-2 Corded Phone

2 Answers

Message Greeting

The KX-T7456 is a proprietary system phone. You have a Panasonic phone system and a voice mail, both separate items with their own part number. Your phone can work on several different systems and use different voice mail so your first step is to determine the part numbers from the system and voice mail. Then you will need a "programming" manual or possibly "administrator's manual" NOT a "user guide" for at least your voice mail and maybe for the system as well.

Oct 16, 2007 | Panasonic KX-T7456 Corded Phone

Not finding what you are looking for?
Panasonic KX-T7453 Corded Phone Logo

1,557 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Lands Phones Experts


Level 3 Expert

102366 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers


Level 2 Expert

85 Answers

Are you a Panasonic Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides