Question about Kenwood DDX7017 Car DVD Player
Hi, i purchased a BT-100 for use with my DDX-7017, but it doesn't work. Is there any problem? BTW, on the back of the DDX07017 there is a smal 4 pin round jack. What is ths jack for? Best regards!
SOURCE: kenwood ddx-7017 lock code
● How to clear the Security Code
In adjusting K/R destination units, if the unit starts up with
Security ON, the Security Code can be cleared in the following
manner. (Other than in Test Mode)
1) In the e Security ON condition, after resetting or turning
power ON after backup OFF, then the session starts with
Security Code Input screen.
2) With the attached remote control in the Audio SW selected
condition, input the code with the following procedure.
Procedure 1: “K” input (Press Tenkey  2 times)
Procedure 2: “C” input (Press Tenkey  3 times)
Procedure 3: “A” input (Press Tenkey  once)
Procedure 4: “Q” input (Press Tenkey  2 times)
Note: If a remote controller other than the attached is
used, Pressing Tenkey  twice will cause “R” to be input.
If a mistake is made during Procedure 1~4 above, input
other remote controller Key. Then, start inputting again
from Procedure 1.
3) Security Code is complete when the input screen for the
Security Code is cleared.
Posted on Nov 30, 2009
Tips for a great answer:
Aug 24, 2012 | Kenwood Ddx-419 6.1" In Dash Double Din...
Oct 22, 2010 | Kenwood DDX7017 Car DVD Player
Feb 28, 2010 | Kenwood Excelon DDX-7015 Double Din Car...
Aug 10, 2009 | Kenwood KVT-512 Car DVD Player
Aug 08, 2009 | Kenwood DDX7017 Car DVD Player
Nov 15, 2008 | Kenwood DDX-6019 Car DVD Player
Feb 09, 2008 | Kenwood DDX7017 Car DVD Player
Apr 18, 2014 | Kenwood DDX7017 Car DVD Player
231 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: