Question about Onkyo TX-SR705 Receiver

4 Answers

Onkyo TX-SR705 - No Audio - Flashing HDMI

Cannot get sound to my 7.1speaker setup either by Radio, CD, DVD via the Onkyo AV Receiver all connected via HDMI. I can only get sound on Zone 2 via the radio. I notice the HDMI flashes on the receiver. It not the dvd player or hdmi cable as it works fine connected directly to the TV.

Dvd connection is set to HDMI1,

I even tried a factory reset, but same problem.

Please help.

Posted by on

  • ian_gough Apr 18, 2009

    Hi, thanks for you advice, since posting this, sound has come back but its an intermitting problem, sometime it works and sometime it doesn't, like it has a mind of it own. When it comes back it will play for hours without problems if you had to leave it on radio, when you switch it of and back on again, no sound.



    Can this still be the IC amplifier on the main board.

×

Ad

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

The posabilities is power amplifier on your reciever is bad,
replays reciever or repair it.More likely this is IC amplifier located on the main board of the reciever

Posted on Apr 17, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the exact same problem. I fixed it by resetting to factory settings: While receiver is turned on, press and hold down VCR/DVR button, then press ON/STANDBY button. Make sure you write down your current settings, so you can easily go through the setup after resetting.

Posted on Aug 22, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I got the same problem today after using this receiver for over 6 years. Resetting to factory setting did not help. No sounds through speakers or headphones, on all inputs including radio tuner - not even static noise. HDMI is blinking too. Current workaround is to plug everything directly into HDTV and using TV's speakers, but need to find out how to fix my Onkyo receiver too.
If it's any relevant, when I plug in setup mic the receiver goes into Audesey mode, and says "press enter: next" but pressing enter has no effect.

Posted on Nov 24, 2012

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Not a solving of the problem, just not sure how else to post on here but I have the exact same problem. it was working fine and all of a sudden i get no sound out of my receiver. Everything works fine if connected directly from tv/dvd and tv/cable box.

Were you able to find a solution?

Posted on Jun 01, 2010

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Audio Problems

See www.avforums.com/forums/onkyo-owners-forum/696423-faq-setting-up-ps3-onkyo-amp.html

This should give you the info to set up the ps3.

Posted on Jan 04, 2009

  • 1 Answer

SOURCE: new home theater setup- no signal at tv using onkyo tx=sr605

This might somewhat help. Today I went back .. I went HDMI out of the Cable box and DVD player into 2 of the TVs HDMI ins. The digital audio out from each, straight to the receiver and things are working ok. All speakers are working OK. Sound isnt as loud or crisp but unfortunately I found no other solution.

Posted on Jan 06, 2009

  • 1 Answer

SOURCE: Onkyo TX-SR606 getting no sound from HDMI sources

Not sure if this is your fix, but I had what I thought was the same problem. I played with my Onkyo quite a bit ensuring the correct assignments for HDMI, audio and all that stuff. Turns out I neglected to make sure the output devices were properly assigned. Many devices aren't default to output sound over HDMI. I changed the audio out settings on the cable box to HDMI and suddenly the Onkyo worked great. I know, I'm an idiot for not checking that in the first place, but maybe someone out there is having the same trouble as well.

Posted on Apr 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I connect my onkyo tx-sr705 to a pyle pro speaker selector? I am "not" using the onkyo for a surround sound, only for music with 3 pairs of speakers in different rooms. (CD, Sirrus...


Hi Mdensonjr, I see that this was posted in 2011 but well the speaker selector would be connected to the Front speaker terminals, Thanks, JT

May 29, 2011 | Onkyo TX-SR705 Receiver

1 Answer

Sound won't play through Onkyo TX-SR605 when using HDMI


The chances are that you have selected an incorrect sound setting or not switched it on, for the HDMI you are using. With Onkyo receivers each connection will have it own settings for video and sound. You just need to look in the manual as to how to select the settings.

May 08, 2017 | Onkyo TX-SR605 Receiver

1 Answer

How do I link my Onkyo TX-SR507 to a PC?


It sounds like you don't fully understand the Onkyo's HDMI port assignment procedures.

But why burden an HDMI cable with audio only? Don't you have a coaxial digital or spdif optical output on the PC you could use? That would make things simpler for setup. Just jam it into one of the appropriate audio inputs on the Onkyo.

Jan 28, 2010 | Onkyo Tx-sr507 A/V Receiver

1 Answer

1080P video via HDMI generates awful interference


Your Plasma's native resolution is 720P. Go into the Blu Ray's output setup. you can choose 480p 480i 720p 1080i and 1080p. Set it for 720p that should clear up the issue.You may have to run Component directly to the TV since you only have 1 HDMI input and you can run Digital coax or optical to your AV receiver for audio. On a 50" TV the difference between 720p and 1080p using "GOOD" cables cannot be seen by the human eye. Above 50, yes it is noticeable.
Hope this helps.

May 22, 2009 | Onkyo TX-SR705 Receiver

1 Answer

Don't want to use receiver to turn Plasma on via Verizon DVR


You can not have a signal from cable/satelite TV when reciever is OFF.The only way is reconnect by using defferent setup configuration to illiminate the receiver.In that case you well see just regular Tv program but you should connect antena to your TV.

Apr 17, 2009 | Onkyo TX-SR705 Receiver

1 Answer

Picture sound blackout (blink) when cable box/receiver HDMI used


Onkyo service told me, the second timethat I called them, that there is a known HDMI handshake issue with Motorola and Atlanta Scientific cable boxes. The only solution, and it was a solution, is to connect the box through the HDMI 1 port ONLY. All the other (2,3,4) result in blinking/dropping of signal. I did this, changed the cable/satelilte setting to HDMI 1 and all is well.

Apr 12, 2009 | Onkyo TX-SR705 Receiver

1 Answer

Is using the HDMI at the receiverr better


Unless you have a Blu-ray DVD player you should be fine using HDMI into the receiver first.

Feb 26, 2009 | Onkyo TX-SR705 Receiver

2 Answers

HDMI connections


The three inputs will all carry picture and sound. You then will definitely picture out to the TV but sometimes, depending on the manufacturer, no audio because it is assumed the the AV receiver will handle all of the audio duties therefore no need for audio at the TV.

Feb 25, 2009 | Onkyo TX-SR705 Receiver

2 Answers

New home theater setup- no signal at tv using onkyo tx=sr605


Could well be the quality of your cables. if you have high end cables the consult a service agent. if you have the cables that came with the products, go and get some better ones.

Nov 04, 2007 | Onkyo TX-SR605 Receiver

Not finding what you are looking for?
Onkyo TX-SR705 Receiver Logo

1,837 people viewed this question

Ask a Question

Usually answered in minutes!

Top Onkyo Audio Players & Recorders Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

 Grubhead
Grubhead

Level 3 Expert

5158 Answers

The Knight
The Knight

Level 3 Expert

74383 Answers

Are you an Onkyo Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...