Question about Xerox Phaser 6115MFP/D - Multifunction - color - laser - copyin... Printer

Open Question

Message: NAND FLASH ROM ERROR IA CODE CHECK SUM

NAND FLASH ROM ERROR IA CODE CHECK SUM

Posted by on

  • Anonymous May 15, 2009

    my device apear problem , i see in display only error message --->NAND Flash Rom Error, IA Code Check Sum Message.

    i try to shutdown device and opened after 2 minutes ,but nothing ! I have the same problem!

×

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 62 Answers

SOURCE: NAND FLASH ROM ERROR - 2490MF

Konica before fixing the issue used to ship out the controller board.
Now a simple firmware upgrade will solve your issue

Posted on Aug 13, 2008

Ad
  • 2 Answers

SOURCE: NAND FLASH ROM ERROR IA CODE CHECK SUM

Update Firmware on machine to latest level ,you will need the print driver and scanner driver installed
use the USB connection
Here is a link to the ftp site for firmware download
ftp://ftp.minolta-qms.com/pub/drivers/other/MC2490MF/

There is apdf that explains how to update the firmware correctly
to get started turn on machine with the menu key held down the display will change to BIOS mode
then send firmware from program downloaded

Posted on Dec 17, 2008

  • 1 Answer

SOURCE: my phaser 6115mfp won't work. I get a message that says

How did you solve this NAND error??

Posted on Jun 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Nand flash rom error


I'm afraid it is the switch that is giving the Nand memory error, but can't verify this, because I don't know what model you are using. I can't find an error like this in the Epson high performance printer.
Do you know what switch you are using? Cisco has thousands.

Oct 29, 2013 | Office Equipment & Supplies

1 Answer

Have an Abit A17 motherboard that stops booting with a check sum error. Code on the digital readout is either IA or 1A, neither of which is in the manual. Any idea about this?


Press delete as the system boots up and go into BIOS Setup.

Change boot sequence so that your machine starts with the CD/DVD ROM disk.

Boot from the CD/DVD and do a clean installation.

Jul 15, 2011 | Abit AI7 Motherboard

1 Answer

NAND FLASH ROM ERROR IA CODE CHECK SUM


you need to update the firmware here is the link http://www.fixya.com/ftp://ftp.minolta-qms.com/pub/drivers/other/MC2490MF/
install the printer and SCANNER driver via usb

Mar 15, 2011 | Konica Minolta magicolor 2490MF Laser...

1 Answer

NAND FLASH ROM ERROR IA CODE CHECK SUM display on my konica bizhub C10..


Have a Konica Minolta Tech come out and re-flash the machine firm ware, can not be done with out access to a secure web site to down load the firmware

Oct 26, 2010 | Konica Office Equipment & Supplies

2 Answers

When i'm turn on my pc this message would appear ''bios rom chesum error'' what should i'l do?


the ram has some error 
better remove the rom blow air to it wipe it wit a clean soft  material
then replace the same 

Mar 06, 2009 | Computers & Internet

1 Answer

NAND FLASH ROM ERROR IA CODE CHECK SUM


Update Firmware on machine to latest level ,you will need the print driver and scanner driver installed
use the USB connection
Here is a link to the ftp site for firmware download
ftp://ftp.minolta-qms.com/pub/drivers/other/MC2490MF/

There is apdf that explains how to update the firmware correctly
to get started turn on machine with the menu key held down the display will change to BIOS mode
then send firmware from program downloaded

Nov 21, 2008 | Konica Minolta magicolor 2490MF Laser...

1 Answer

NAND FLASH ROM ERROR - 2490MF


Konica before fixing the issue used to ship out the controller board.
Now a simple firmware upgrade will solve your issue

Aug 11, 2008 | Konica Minolta magicolor 2490MF Laser...

Not finding what you are looking for?
Xerox Phaser 6115MFP/D - Multifunction  - color - laser - copyin... Printer Logo

Related Topics:

362 people viewed this question

Ask a Question

Usually answered in minutes!

Top Xerox Office Equipment & Supplies Experts

Xeroxrep

Level 1 Expert

33 Answers

Philip Hughes

Level 2 Expert

72 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Are you a Xerox Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...