Question about Epson Stylus Pro 7600 InkJet Printer

1 Answer

"reload paper" message

Printer gives message "reload paper" and doesn't recognize paper.
previously it was ocasionally, now it gets constantly.

Posted by on

  • 3 more comments 
  • superasd2 Apr 15, 2009

    I've found myself!
    Paper sensor (which is on the bottom) was completely dusty!
    Just blowed on it and it's working now!

  • superasd2 Aug 22, 2009

    When you open front cover, look at the right below. There is a tiny "eye" at 5 cm left to the screw.Look out, if it's under the dust it is almost invisible!

  • jfciii May 11, 2010

    where specifically is the paper sensor? I am having the same problem but cannot locate the sensor.

  • James D Jun 06, 2013

    Quick fix, thanks!

  • Anonymous Mar 12, 2014

    keeps giving me reload paper message



1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Lower paper sensor was completely dusty. Just blowed it and it works.

Posted on Apr 15, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Printer error

First confirm if the printer is recognized by your system,and check the printing history to see if there is a queue. If there is, delete them and restart your system. This time, make sure it\'s recognized, then resend your instruction to print.

Jun 12, 2013 | Office Equipment & Supplies

1 Answer

Clp-510 constantly gives paper jam error, although none exists.

false error message / could be due to the dirty rollers or bac=d sensors on the printer. Sometime when printer does not get enough power it might give this erropr message .
Hence also try to change the power source.

Oct 16, 2010 | Samsung CLP-510 Laser Printer

1 Answer

Whenever I try to print something I keep getting

It's a possible hardware issue in the feeding mechanism. Try to remove the cartridges from the printer then close the cover. Remove the sheets of paper. Unplug the printer from the power source. Wait at least 30 seconds before plugging back the printer to the power source. When the printer's ready, reload the cartridges. Load some paper but don't overload as this may send wrong information to the printer. Have the paper guides lightly touch the sides of the paper, thus avoiding shifting of paper when it feeds. Let it print an alignment page and do some test prints from computer. If problem persists, I strongly suggest you contact Lexmark Technical Support to further investigate the problem. Thanks.

Jul 25, 2010 | Lexmark X4270 All-In-One InkJet Printer

1 Answer

Printer will not pull paper through and then gives an error message to reload paper but paper is already loaded.

My suggestion to you is to clean the rollers. You can get a printer cleaning sheet from Staples or Office Depot. This should help.

Jun 15, 2010 | HP Deskjet 3845 InkJet Printer

1 Answer


Try cleaning the paper rollers with alcol to remove impregnated ink which causes the roillers to become shiny. It is failure to grip the paper that usually causes this. use a plastic pot scourer to gently roughen the platten roller to allow it to grip better.

Jul 25, 2009 | HP Photosmart C7280 Laser Printer

1 Answer

MP 190 Error Message E 2 2 after paper can't get it to work again

hello everyone...its just a simple problem....dun worry...1st, u hve to connect ur printer to other computer(not the same pc as u're using now)...then the printer will work fine...after tht..connect ur cable back to the previous computer(1st computer)...then ur printer will be fined!!!!!!!!!!! :) -darkrogue

Jul 11, 2009 | Canon PIXMA MP150 All-In-One InkJet...

2 Answers

Reload Paper constantly shows up

This printer is very finicky about paper loading. I see this error most commonly when using auto-cut roll paper. If the paper edge is not cut perfectly straight, and it is not inserted into the printer perfectly strait, it will give you an error. When it does this, you can simply load the paper and press "cut" instead of "pause" when it says "press pause" and it will cut the paper straight. You can also set it to "Roll Paper Manual Cut" and load the paper, then set it back to "Roll Paper Auto Cut."

Jun 30, 2009 | Epson Stylus Pro 10000 InkJet Printer

2 Answers

Cannon multipass f80

Hi,I would suggest you to first trying unplugging/ switching off your device for 5 minutes. This restores and refreshes the device. Go for it
Let me know if this works, if it doesn’t then I’ll provide some other alternative solution.

Dec 10, 2008 | Canon MultiPASS F80 All-In-One InkJet...

Not finding what you are looking for?
Epson Stylus Pro 7600 InkJet Printer Logo

Related Topics:

823 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Office Equipment & Supplies Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18407 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides