I didn't get a disk to hook up my canon pixma mx310 all in one to my computer what can I do.

Here
http://gdlp01.c-wss.com/gds/7/0300000437/01/mx310_qsg_us_v1.pdf

Canon Support Drivers PIXMA MX310

to download the drivers for yourCanon PIXMA MX310 Go to this link:http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mx_series/pixma_mx310#DriversAndSoftware

When you get there, selec where you see "Operating System", select your operating system (ex: XP, Vista, or Windows 7). It will then show all the drivers for your operating system...scroll down until you see the Drivers software and then download and reinstall it. Hopefully this will help...good luck.

you can get it fro here....

http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mx_series/pixma_mx310?selectedName=DriversAndSoftware

and

http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mx_series/pixma_mx310?selectedName=BrochuresAndManuals

www.canon.com/support/dowloads remove the old driveers from add/remove software in the control panel, run the installation program and u should be good

You can download the software you need from the Canon site:

http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=334&modelid=15603

download the driver for your printer from here http://drivers.softpedia.com/get/PRINTER/CANON/Canon-PIXMA-MX310-MP-Drivers-100.shtml after instal reboot and you can use your printer.

Hi

Please click on this link to download the software for your printer.

Canon PIXMA MX310 All In One Printer

Please do rate the solution as FixYa and revert for further assistance.

Thanks
Rylee

Hey,

you can get it from here
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=123&modelid=15603

Click on drivers and downloads
then select your windows version and download the files

install the printer


Let me know if you need anything else.


Thanks,
Ekse

check out the following link to download ur software & drivers.

1/then install it without hooking it to the Computer

2/ restart the computer

3/ plug it

4/ enjoy it

5/ dont forget rating this post

http://software.canon-europe.com/products/0010491.asp

choose ur language and OS.

Did you update your computer with the latest drivers and firmware for Vista?

You can get them from Canon HERE