Question about NComputing X300 3 User Expansion Kit Graphic Card

3 Answers

When reinstalling a x300 series box error message

Access to mcx-xp database is locked. can not conntinue this problem.

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 1 Answer

Reinstall driver and software. Hardware Device Manager in Windows XP write problem code 10 and code 1. Problem device X300 Graphic Controller and X300 Audio code 10. PCI Card is OK. PCI car problem X300B Bus Enumerator conflict DMA / IRQ or I/O FA00000 - FAFFFFF NComputing_X300_id_03 and X300 Graphic Controller.

Posted on Jun 19, 2010

  • ivanjuraj Jun 20, 2010

    where
    can I find the mcx-xp database and how to unblock


×

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Just install the update x300 series software(v4.03.100.1 ) fom ncomputing website.

ed.

Posted on Apr 16, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

I device invate seral nember

Posted on May 22, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

8 Answers

Access database 2003 problem with a copy of database file. How to fix?


You say corrupt, in what way exactly? Do you get any specific error numbers/messages?

Have you tried Access repair program? Compact and Repair. If not, use it. But ensure that you made a backup, it is necessary because all the recovery tips can make the damage even worse.

Also try Jet Compact Utility. This tool created by Microsoft and it is much like Compact and Repair, but more successful in repairing.

If no one of above advice helps, then perhaps you need more powerful solution. In this case try to run a good third-party. I would recommend Recovery Toolbox for Access. It must help you. https://access.recoverytoolbox.com/

Feb 23, 2015 | Microsoft Access 2003 for PC

1 Answer

Recently i have a problem with NCX 2000-xp consol i have 4 desktop one one system one the main pc is working but other three screen show internal error what can i do to solve this problem


Where is the 'internal error' showing up, in the NComputing console, or on the Station screens? My recommendation is to uninstall the vSpace software, reboot, run thier cleanup utility, and reinstall the latest version. Before reinstalling, make SURE that you have applied XP SP3 and ALL of the current MS updates. Additionally, browse Device Manager and make sure there are NO missing or conflicting drivers. Lastly, if Intel Active Management Technology is installed, disable it. This will be listed in the ports section of Device Manager as either IAMT or SOL/COM3. Do NOT, I repeat, do NOT install from the provided CD. As of this posting date, the cleanup utility is available here: nc-eng.com/tools/ncuninstall. The most up to date vSapce for X300 on XP is at: ncomputing.com/download/x300.zip. If you hit this post later and the supplied URLs are not valid call NComputing TS at 888-365-1210.

Jun 30, 2011 | NComputing X300 3 User Expansion Kit...

1 Answer

I recetnly had a problem with my hard drive and had to replace. We reinstalled DL and copied old directory on new directory. Now when i try to access DL I recieve an error message Error 3204 Data Base...


I can't help you directly, but I can direct you to the manufacturer's website, where you can find further Contact information for technical assistance, and under Tech Support, a link to the tech library page where you can research instruction manuals and download software, etc.

http://www.alarmlock.com/

Go to that page, then check under "Tech Support" or "Contact".

Good luck!

Jun 07, 2011 | Trilogy ALARM LOCK PL3000 Series T3 Prox...

2 Answers

I have problem with my xtenda x300 and on my display stay error mesage: internal error 0x2025 0x08x-0. I aprechiate if you could send me a solution. Thank you


My recommendation is to uninstall the vSpace software, reboot, run thier cleanup utility, and reinstall the latest version. Before reinstalling, make SURE that you have applied XP SP3 and ALL of the current MS updates. Additionally, browse Device Manager and make sure there are NO missing or conflicting drivers. Lastly, if Intel Active Management Technology is installed, disable it. This will be listed in the ports section of Device Manager as either IAMT or SOL/COM3. Do NOT, I repeat, do NOT install from the provided CD. As of this posting date, the cleanup utility is available here: nc-eng.com/tools/ncuninstall. The most up to date vSapce for X300 on XP is at: ncomputing.com/download/x300.zip. If you hit this post later and the supplied URLs are not valid call NComputing TS at 888-365-1210. Lastly do NOT forget to register the vSpace software and related XD1 boxes.

Apr 26, 2011 | NComputing X300 3 User Expansion Kit...

2 Answers

I installed succesfully but when i update xtenda that i shawn to error and xtenda is not completely updated and i shawn my xtenda actiovation license is expired . so that the main problem is guest pc...


My recommendation is to uninstall the vSpace software, reboot, run their cleanup utility, and reinstall the latest version. Before reinstalling, make SURE that you have applied XP SP3 and ALL of the current MS updates. Additionally, browse Device Manager and make sure there are NO missing or conflicting drivers. Lastly, if Intel Active Management Technology is installed, disable it. This will be listed in the ports section of Device Manager as either IAMT or SOL/COM3. Do NOT, I repeat, do NOT install from the provided CD. As of this posting date, the cleanup utility is available here: nc-eng.com/tools/ncuninstall. The most up to date vSapce for X300 on XP is at: ncomputing.com/download/x300.zip. If you hit this post later and the supplied URLs are not valid call NComputing TS at 888-365-1210. Lastly do NOT forget to register the vSpace software and related XD1 boxes. Pay CLOSE attention to my comments about the Intel Active Management Technology, I think that is your biggest suspect but I'd recommend you follow all the steps I listed.

Apr 26, 2011 | NComputing X300 3 User Expansion Kit...

1 Answer

X300 internal error code 0x2025-0x08X-0 means


My recommendation is to uninstall the vSpace software, reboot, run their cleanup utility, and reinstall the latest version. Before reinstalling, make SURE that you have applied XP SP3 and ALL of the current MS updates. Additionally, browse Device Manager and make sure there are NO missing or conflicting drivers. Lastly, if Intel Active Management Technology is installed, disable it. This will be listed in the ports section of Device Manager as either IAMT or SOL/COM3. Do NOT, I repeat, do NOT install from the provided CD. As of this posting date, the cleanup utility is available here: nc-eng.com/tools/ncuninstall. The most up to date vSapce for X300 on XP is at: ncomputing.com/download/x300.zip. If you hit this post later and the supplied URLs are not valid call NComputing TS at 888-365-1210. Lastly do NOT forget to register the vSpace software and related XD1 boxes. Do NOT install from the provided CD, rather download the latest software from the link provided and install straight from that resulting download.

Apr 18, 2011 | NComputing X300 3 User Expansion Kit...

2 Answers

Problem install X300 Xtenda Multi Box. Windows XP code 10 for X300 Graphic Controller.


Solution: Please change your VGA Card wit Supported Display Card with external VGA, cause if you use for unsupported VGA card the problems that will occur. I suggest using external VGA (not use onboard VGA) like Nvdia Gforce. I always use that produk for all my Client.

For New Driver X300 Graphic you can download there.

I hope it usefull

Regards,

Mar 22, 2011 | NComputing X300 3 User Expansion Kit...

1 Answer

NComputing vSpace not installed my pc Error


Options:
(A)

An authorization error usually occurs when more than one system in a LAN has the same software serial numbers assigned to the system. In this case, the first PC to be turned on does not suffer an authorization error, but any subsequent PC's which contain the same serial number will experience the issue.
To remove these duplicate serial numbers, first unregister them, then delete them from the host PC they are installed on:
  1. Access the NConsole application by either:
    • Click "Start" > "All Programs" > "NCX-2000-XP" > click on the entry labeled "NCX - 2000 - XP"
    • Double-click the NComputing console application icon in the system tray
  2. In the left-hand pane, navigate to "Local Settings" > "Information and Settings" > "Serial Numbers"
  3. To unregister a serial number, right-click on the number and select "Unregister now"
  4. To remove serials, right-click on the number and select "Delete"
Also, an update that does not install correctly may rarely cause corruption of the data file in which serial number information is contained, causing this error. If there are no other X-series hosts on the network with duplicate serials, then a complete uninstall and reinstall of the X-series software may fix this issue. When uninstalling, choose to unregister all serials and remove all serial registration data.
To download the latest version of our software, please search the knowledge base using "software download" as the search text, for links to the latest software.

(B)
When more than one X300 station is used under the same login (same Username on two or more stations), Active Desktop error messages may occur. Also stations would be sharing same user settings and other files, which could cause unpredictable errors.
Different stations should always be used with different usernames logged in. To add more User accounts (usernames), go to Windows Control Panel, select Users and then go to Create New User option.

Mar 10, 2011 | NComputing X300 3 User Expansion Kit...

1 Answer

Keperksy Internet 2009: Error message:


try to update your kaspesky online to resolve the database corrupt error.....usually this error occurs whenever you restore your pc to a previous date that make your database corrupted...goodluck

Dec 11, 2009 | Kaspersky Labs Internet Security 2009

1 Answer

BCM Problem ... Lost Contacts


The BCM uninstallation doesn't delete your databases. They should still be on your computer here:

C:\Documents and Settings\<username>\Local Settings\Application

With either a *.mdf or *.ldf extension. Those are SQL databases which you can get the data off and into a CSV file which you can import into outlook (of course technical expertise is needed) or you could more easily (once the problem with BCM is resolved), make BCM re-recognize the databases by following these instructions:

1. Go into BCM and create a new database. That database needs to match the
name of the .MDF file. So if the MDF file is named "MyBusiness.MDF", create
a new BCM Database with that name

2. Stop the MSSQL$MICROSOFTSMLBIZ Server by going to Start > Run >
services.msc and selecting the MSSQL$MICROSOFTSMLBIZ service
3. Copy the original .mdf & .ldf files over the blank database. They should
be in the following location
C:\Documents and Settings\<username>\Local Settings\Application
Data\Microsoft\Business Contact Manager

4. Start the Server again (see step 2)
5. Restart BCM and see if you can access your data

which I found here (credit to Larry from the Lockergnome's forums).

If you could write what the error message is I could possibly help you resolve the BCM problem you're having, thereby making it easier for you to view the data on the SQL database files.

Dec 31, 2007 | Microsoft Outlook 2003 for PC

Not finding what you are looking for?
NComputing X300 3 User Expansion Kit Graphic Card Logo

849 people viewed this question

Ask a Question

Usually answered in minutes!

Top NComputing Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Tom Chichester

Level 3 Expert

34188 Answers

Dan Shibata
Dan Shibata

Level 3 Expert

542 Answers

Are you a NComputing Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...