Question about Mitsubishi WS-65908 TV

1 Answer

My mitsubishi tv model ws55908 will just turn itself off after I have been watching it. It could be as soon as 1 or two hours or 4. it does not happen all the time I can go a month without it happening then it starts again.

Posted by on

  • cjbutenschoe Apr 15, 2009

    it flashes a sequence of 2 blinks then 3 blinks then 2 then 3 then 2 then 3 then 2 then 3 then 2 then 3



    thanks for helping

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 116 Answers

This TV has a self diagnosis feature. When the set fails, push "menu" and "input": buttons at the same time and hold them in for more than 5 seconds. Watch the front panel light. It will blink two numbers five times. Get back to me with the numbers.

Posted on Apr 15, 2009

  • Paul Buscema Apr 16, 2009

    Thanks for your response. Error code 23 indicates a power supply failure into the convergence circuitry. Most likely the convergence integrated circuits and two fuses need replacement. I suggest contacting a local authorized Mitsubishi service center for repair. The cost will be $350-450.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Tv turned off by itself, red light came on. when i turned it back on if had a flashing green light the turned solid green, there was sound but no picture, it turned off again within 2 minutes of turning it...


Tv probally needed a new tv projection lamp.This tv has not been change it projection lamp like 1 1/2 or 2 years already?Tv been on and used it like 4 or 5 hours everyday?Yes,than the tv flashing or solid on green LED light is on have a word "LAMP" written on it tv bazel frame?Yes,tv 100% require a new tv projection lamp replacement.

Aug 31, 2011 | Mitsubishi WD-73737 73 in. HD-Ready TV

1 Answer

I have a 65 inch DLP and when i turn it on i get no picture and just the sound of static comming out of the front tv speaker, no actual audio from the cable box. When looking near the bulb box i see the...


When was the last time u change the projection lamp?If u watches tv at lest 4 or 5 hours a day and the projection lamp has not been change the last 1 1/2 or 2 years.This problems happen alot,when the projection lamp life is over.Change the projection lamp.

Sep 03, 2010 | Mitsubishi WD-65731 65" HDTV

1 Answer

Factory settings ws55908


Normal factory settings are for normal video and audio. Convergence factory setting will default all convergence setting requiring a full alignment of which I would not recommend. Factory settings in the service mode will change the geometry, gray scale, and others, that's another one I would not recommend. Tell me why your asking, and the problem your having?

Oct 24, 2009 | Mitsubishi Televison & Video

1 Answer

Turns of after being watched for several hours.


Do you have the tools required to solder electronics? Do you know how to solder electronics? Have you been trained in CRT safty ? Do you know about High Voltage safty? Is the tv Model number WS-65809? Do you know how to perform static geometry adjustement on a WS65809 if needed? Do you know how to perform static convergence alignment on a WS-65809? Do you know how to perform fine convergence adjustement to a WS-65809?

IF
The answer is :yes yes yes yes yes yes yes yes
AND
You can retreive an error code of 23 or 24 right after the tv shuts
itself off .
THEN
There is a 95% chance that I could tell you what to solder , no parts need to be replaced in your television and you would not have to pay someone to repair it.

Oct 04, 2009 | Mitsubishi WS-65809 65" Rear Projection...

1 Answer

Looses video


There are so many thing that can cause this to happen. If you answer some questions we can narrow it down some. 1) when the picture goes black if you hit the menu button on the mitsubishi remote or on the front of the tv itself does the menu show up? 2) After it goes dark how do you get it back? do you turn it off and let it sit for awhile or can you turn it off and then right back on to get a picture? 3) what is the model number? this can be found on the back of the set. If you can answer these questions we can go forward.

Thanks!
Tim Nolan

Sep 11, 2008 | Mitsubishi WS-55807 TV

1 Answer

Mitsubishi VS-45607


Do self test first goto www.ctechnicians.com

Dec 08, 2007 | Mitsubishi VS-45607 45" Rear Projection...

2 Answers

Tv powers on, then switches off immediately


check out ctechnicians.com and find error codes

Oct 07, 2007 | Mitsubishi VS-60607 TV

Not finding what you are looking for?
Mitsubishi WS-65908 TV Logo

Related Topics:

171 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1210 Answers

The Knight
The Knight

Level 3 Expert

74136 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...