Question about Televison & Video

1 Answer

Red & green shadows have started to appear on all images similar to 3D broadcast.

Our hitachi 60" projection tv that we purchased about 13-15 yrs. ago just started showing colored shadows on all the images. The colors of the shadows are predominatly red and green. It just started last night and at first would correct itself but now is occuring all the time. Can you tell me what the problem and if it can be fixed? Thank you, Bob

Posted by on

  • bobarb881 Apr 15, 2009

    You said the solution to my problem was the convergence intergrated circuts have failed. What is the replacement part and or part number? Thank you, Bob

  • bobarb881 Apr 16, 2009

    Hitachi model 60SX11K

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 116 Answers

The convergence integrated circuits have failed. It can be fixed-about $350.00

Posted on Apr 15, 2009

  • Paul Buscema Apr 16, 2009

    Sure. Mod # please

  • Paul Buscema Apr 17, 2009

    Component locations are...IK04, IK05, and IK06. Red, green and blue. For dependability, I would change all three. They are all STK4274, and generic is OK

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Magic Focus button will not line up picture. Red and green colors shadow images.


The tv have a problems known as a convergence picture problems it is dead.The tv have any colors lines like R,G,B mis alignments,tv have any colors shadows pictures or 3D pictures look alike?Yes,than the tv convergence board it is dead and the causes of these problems.The tv convergence board must have to repair like replacing like 2 STk covergence ICS and some or all of it resistors too.To fixed the tv convegence board to solved the tv convergence picture problems.The tvs shops will cost u like $300-350 for parts and labors.

Sep 02, 2011 | Hitachi 53SDX01B 53" Rear Projection...

1 Answer

Screen resembles 3D look with predoment red and green to images - did the blue blub burn out and need to be replaced?


The tv have a problems known as a convergence problems,it dead.Tv have colors lines R,G,B mis alignments,have colors shadows pictures or 3D pictures look alike?The tv convergence board have dead 2 STK convergence ICS and some or all it resistors too.By replacing all these parts on the tv convergence board to fixed it to solved the tv pictures convergence problems.The shop,will cost u like $300-350 for parts and labors.

Feb 05, 2011 | Mitsubishi VS-60803 60" Rear Projection...

1 Answer

On the screen I see on the sides of every object a shadow, it,s green on the left side and red on the right side accompanied by some little horizontal red stripes. It started doing it all of a sudden a...


The tv have a problems known as a convergence problems,it dead.The tv colors lines R,G,B mis alignment,have colors shadows pictures or 3D pictures look alike.The tv convergence board have dead 2 STK convergence ICS and some or all of it resistors too.These parts on the tv convergence board,must be replaced to solved the tv picture convergence problems.The shop,will cost u like $300-350 for parts and labors.

Nov 15, 2010 | Hitachi 65TWX20B 65" Rear Projection...

1 Answer

Color shadowing on screen


I had similar symptoms about a year ago. Also came on sudden. The red convergence chip had burned out (poor heat sinking on this model Hitachi). Replacing the color convergence chips fixed it. ($50 for parts.) First, however, have you tried the "magic focus" function? That's explained in the manual, which is available online IIRC, but I'd have to look for the link if you need it.

Mar 02, 2010 | Hitachi 53UDX10B 53" Rear Projection...

1 Answer

Hitachi L32HO1UA HD TV blurred images very dark unwatchable scree


Hi Ellie!

Maybe in the manual you can find any information how to resolve this problem.

On this page of the manual there are shown most common receprion problems: http://manualsbrain.com/ru/manuals/979781/?page=72

Apr 26, 2017 | Hitachi 61SWX10B 61" Rear Projection...

1 Answer

We are getting ghost images and the color is not correct


I have red concave lines going across the screen, plus wording appears double like a ghosting effect, this is ongoing from the time the tv is turned on until it is turned off. This started 3 days ago. Is it time for a new tv, its 9 or 10 yrs old now.

Mar 29, 2009 | Hitachi 43UWX10B 43" Rear Projection...

1 Answer

Red & green shadows


Replace the two STK392-120 Convergence Ics you can get replacements at the following link with step by step instructions on how to do the repair.
http://servicemanuals.vstore.ca/

Jan 15, 2009 | Philips 60P8341 60" Rear Projection...

1 Answer

Blue shadows appear to be behind white objects


TV shows large red spot in middle of tv when dark show are on, you can see it more.  Now blue spots on upper right side too.  Spend way to much on this tv to have these kinds of problems only after 3 yrs.

Nov 16, 2008 | Hitachi UltraVision CineForm 55VG825 55"...

1 Answer

Green cruve line


Good Day;
Suspect Convergence IC's STK4274, part Number 2003191. Replace all three IK04(red), IK05(green), IK06(blue).
Good Luck, big IRISH.

Aug 30, 2008 | Hitachi 50UX26B/27K 50" Rear Projection...

1 Answer

Color shadows


PVAT!Check for evidence of coolant leak on pcb's, If none found,replace convergence IC's,then align convergence in servicer mode.Check service literature for procedure.

Sep 02, 2007 | Hitachi 60UX58B 60" Rear Projection...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

218 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74473 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...