Question about Canon MultiPASS MP390 All-In-One InkJet Printer

1 Answer

Waste ink near full error

Canon MP390, error Waste ink near full, how can i solve it myself?

Posted by on

  • kekexo Apr 15, 2009

    Sorry to ask a stupid question, is the additional functions on the key pad?

  • kekexo Apr 15, 2009

    Perfect!! thank you very much for your help :)

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 51 Answers

Canon's a little shady when it comes to this, since any waste ink pad I've seen never has been more than 30-40% full. You can reset that status without cleaning the waste ink out and the printer should return to normal.

1) On the printer, press Additional Functions, Scan, Copy, Scan. This will put you in service mode.

2) Select Test mode at the bottom

3) Select #8 Printer Test, wait for more options. It should say 8-2 or 8-3; push the + or - button until it says 8-3 then hit Select. The menu will now say EEPRON Clear

4) Select Ink count which is option (0) and press set

5) Press Stop/Reset, then the power button and wait for it to restart.

I hope this helps!

Posted on Apr 15, 2009

  • Antipode
    Antipode Apr 15, 2009

    Whoops, sorry. Additional Functions should be an option under the menu.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Canon MP390 Printer has come up ''Waste Inn Tank nearly full'' What should I do


CANON printers "compute" the "fullness" of the waste-ink container, based on the number of pages printed, and the "density" of the ink on each page. So, this calculation has produced a "nearly full" prediction. Take the printer to a qualified technician.
They will empty the waste-ink container, and "reset" the electronics in the printer, back to "zero-per-cent-full".

Aug 05, 2010 | Canon SmartBase MP390 All-In-One InkJet...

1 Answer

How do I reset waste ink tank full on Smartbase mp390?


Issue: Alarm / Power light flashes orange 8 times consecutively (Waste Ink Nearly Full Error)
Solution: Press the <RESUME/CANCEL> button to clear the error (1700)
Waste ink absorber error 1700
The printer has a built-in waste ink absorber to hold the ink used during print head cleaning. Eight flashes indicates that this absorber is nearly full.

Press the <RESUME/CANCEL> button on the printer to clear the error, so you can continue the print job. The printer will need to be serviced as soon as possible.


Issue: Alarm / Power light flashes orange 8 times consecutively (Waste Ink Nearly Full Error)
Solution: Press the <RESUME/CANCEL> button to clear the error (1700)
Waste ink absorber error 1700
The printer has a built-in waste ink absorber to hold the ink used during print head cleaning. Eight flashes indicates that this absorber is nearly full.

Press the <RESUME/CANCEL> button on the printer to clear the error, so you can continue the print job. The printer will need to be serviced as soon as possible.


Jan 05, 2010 | Canon SmartBase MP390 All-In-One InkJet...

2 Answers

Canon mp 390 waste ink near full


Some user tried the procedure to reset waste ink tanf full on Canon MP 360 and ... Reset Ink Level for Canon MX300 · Reset Counter Canon iP1500 and iP1000 ...
tricks-collections.com/waste-ink-tank-full-reset-canon-mp360/

Dec 06, 2009 | Canon SmartBase MP390 All-In-One InkJet...

1 Answer

I have a Canonmp390 printer & a message keeps


Hi there,
Error "Waste Ink Near Full"
Cause : The waste ink tank (which holds the ink used for print head cleaning) is nearly full.
Action : Contact the Canon Customer Care - Center.

Have a good day.

Dec 03, 2009 | Canon MultiPASS MP390 All-In-One InkJet...

1 Answer

Waste ink tank nearly - message


it won't stop until the ink absorbers are replaced and the error reset in canon diagnostics. A shop repair, around $100.00

Jul 15, 2009 | Canon SmartBase MP390 All-In-One InkJet...

1 Answer

Printer screen says waste ink near full


Manual Reset procedure Waste Ink Tank for Canon MP390:
  1. Start with printer on, press additional functions, Scan, Copy, Scan. Now you should be in service mode.
  2. Select Test mode (must be the last available selection).
  3. Select #8 Printer Test, it will start cleaning then it will come up with some other option: push the + or - button until it says 8-3 then hit the select button
  4. The menu will now say EEPROM Clear
  5. Select Ink count which is option (0) and press set
  6. Press Stop/Reset Followed by the power button and then wait for it to restart.
hope it helps
cheers

Mar 31, 2009 | Canon MultiPASS MP390 All-In-One InkJet...

2 Answers

''Waste ink near full'' Canon MP390 I have been getting this message for a few weeks and would like to know what to do about it?


ok this may sound silly but did you empty or replace the waste toner? if not do that and should be fine if not it could be a sensor

Jan 30, 2009 | Office Equipment & Supplies

1 Answer

Waste ink near full message


Take paper towels and absorb the excess ink. Make sure that the electricial contact  that tell it is full are clean.

Dec 27, 2008 | Canon MultiPASS MP390 All-In-One InkJet...

1 Answer

Canon MP390 Waste Ink Near Full message


Manual Reset procedure Waste Ink Tank for Canon MP390:
  1. Start with printer on, press additional functions, Scan, Copy, Scan. Now you should be in service mode.
  2. Select Test mode (must be the last available selection).
  3. Select #8 Printer Test, it will start cleaning then it will come up with some other option: push the + or - button until it says 8-3 then hit the select button
  4. The menu will now say EEPROM Clear
  5. Select Ink count which is option (0) and press set
  6. Press Stop/Reset Followed by the power button and then wait for it to restart.

Sep 11, 2008 | Canon MultiPASS MP390 All-In-One InkJet...

1 Answer

Waste ink full


Reading THIS may help you...

Hope it fixed ya...

Geno

Apr 04, 2008 | Canon SmartBase MP390 All-In-One InkJet...

Not finding what you are looking for?
Canon MultiPASS MP390 All-In-One InkJet Printer Logo

Related Topics:

159 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1919 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...