Question about Crosman (4032)

Open Question

A buddy lent me his Crossman Power Master 760; BBs won't feed.

A buddy lent me his Crossman Power Master 760 BB/pellet gun so I could attempt to modify the behavior of some raccoons around my home.
My problem is that the BBs won't feed when I work the bolt to reload for a shot.
Any help or suggestions as to what I can look at to allow the BBs to feed?
Yes, the gun IS loaded with BBs. ;-)

Posted by on

  • cjua Apr 15, 2009

    Found my answer with a download of the product manual from crossman.com. I was overlooking the load button on the top, rear of the receiver. Little bit of a motion necessary to shake the BBs into the loading groove but the 'coons better watch out now and quit hanging out on our patio.

    This looks like a neat site and I might need to start hanging out here a bit. I know a pretty good bit about a lot of different things...or at least know how to find the info I need for an answer.

    Capt Joe

×

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: i need to reassemble a crossman airgun model 760-D

i need a website adress or link to a understandable diagram of how it goes together

Posted on Mar 31, 2008

  • 3 Answers

SOURCE: Crossman Mark 1 CO2 Pellet Gun

Check out www.mac1.com. Tim can sell you the o-rings or customize your gun to another level (see the LD pistol).

Steve

Posted on Nov 19, 2008

  • 1 Answer

SOURCE: Crossman 1204 nightstalker

Try with this:
http://www.network54.com/Forum/275684/message/1136858902/nightstalker+research+pics+%28long%29

Regards.

ACA.

Posted on Feb 10, 2009

  • 1 Answer

SOURCE: what is an older powermaster 760 bb/pellet gun

well just seeing it's old might make it worth about 50$ for a collector to buy, but to actually use it might be worth about 10-20$ the best thing to do is 1. put it up in a local newspaper for sale or 2. go to Gunbroker.com and put it up for auction. Personally I'd say gunbroker, you have no idea how much money people make on there for selling things like Redryders and older guns.

Posted on Jan 27, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Daisy Pumpmaster 760. How do I reassemble?


PDF]OWNER'S MANUAL - Crosman

www.crosman.com/pdf/manuals/C760-OM1.pdf
Crosman Super. ' Pells® or Crosman Super. BBs®. Reservoir ... 'WARNING: Pelletsshould never be-put F'6_ into the BB Loadlng Port . They will iam ... BB How To Load Your 760 Rifle with ... see REPAIR SERVICE section of this manual. ' '.

Crosman 760 Pumpmaster assembly - YouTube

? 3:56
https://www.youtube.com/watch?v=OeOLKDYnGoE
Nov 16, 2008 - Uploaded by stonie stonemaker
Crossman 760 Pumpmaster air rifle in pieces? ... I can't close the bolt there's a little metal part that's not ..

Dec 25, 2015 | Optics

1 Answer

My granddaughters 760 pump master will not hold air pressure. When you pump the handle it makes a funny noise such as rubbing the side of a ballon filled with air. The BB just falls out of the barrell. Can...


Hello, I'm not sure why you wrote under this other guns listing. The Crosman Phantom .177 Caliber Break Barrel Air Rifle is a single break action pump and it only shoots Pellets. also much nicer than the 760 pump master, but, it also costs more than 2x's as much.

as for your problem with the 760. sounds to me like it was not maintained well. If You have tried this already ( Crosman Pellgunoil® Air Gun Lubricating Oil ) and it did not work. You can assume that little BB gun is probably broken, the air compression chamber have popped a seal most likely.

if You haven't tried that, oiling the gun then I suggest doing that and maybe it's not too late. There really isn't a lot to be done on these cheaper models of BB guns.

if the BB gun is not years old, just purchased, and Amazon buy, or something else cool like you have a wal mart receipt for it or even if you don't have a receipt and you just want to exchange it. ( i will explain that in a minute ) then I suggest you try sending it back.

If You bought it at a store`, you don't have a receipt. do this if you feel you did nothing to deserve this broken gun.

go back to that store and buy another one, exactly like that one. with cash or card. save your receipt, take the gun home, get it out of the package and use it and take care of it according to the directions. in a day or two take the broken one and the box from the new one back to the store and tell them you want a refund and they will credit your card back Or if you paid cash they will give your cash back. This method of return eliminates the possible bad mood or cranky manager that COULD turn your request down because of no receipt.

This is a great answer to your problem isn't it? :O) Hope it helps.

Mar 09, 2015 | Crosman Phantom .177 Caliber Break Barrel...

1 Answer

Crossman repair


I have a crossman pulse r78 and it will not shoot ,when you pull trigger it Gus windes oner spring do not egage

Dec 05, 2013 | Crosman Model 760 Pumpmaster Air Rifle

1 Answer

I pump my .177 crossman gun but it will not hold pressure


Usually a 35cent seal that is now more because of shipping, call Crosman # in your manual or find at their web site.

Feb 09, 2013 | Crosman Recruit Multi-Pump .177 caliber...

1 Answer

I have a crossman 1377 (177) cal pellet pistol. Is it ok to shoot BB'S in this gun? Does it damage the rifling in the barrel? Thanks, Gary


yes it safe to shoot bb,s in the 1377 pump pistol,i have 3 of them they actually shoot true'er and with more vilocity

Sep 19, 2011 | Crosman 1377 177 Single Shot Air Pistol

1 Answer

Ilive in indiana and i have a problem with ratcoons . so i set out to buy a good air rifle , i though i had one then i put a bb .177 cal , in my brandnew BEEMAN air gun ,the the bb feel out the barel ......


Are you sure its a bb gun and not a pellet gun? Usually bb guns have a magnet on the bolt, that keep the bbs from falling out. Pellets don't roll so the won't roll out the barrell.

Mar 03, 2011 | Beeman 1024 Takedown Rifle, Scope, Rings &...

1 Answer

My crossman 760 bb gun wont hold air when being pumped


the seals are dry. oil it up and it should be okay

Sep 17, 2009 | Sport & Outdoor - Others

2 Answers

Crosman c11 clip problem


What i did was i get a screwdriver and inserted where the bbs go then push a little down so the metal would expand a little.Hope its helpful

Mar 29, 2009 | Crosman (4032)

1 Answer

Reassebling crossman air gun model 760


First & foremost- Make sure it is unloaded and not charged(point in safe direction-not up in air) and pull trigger. Then: Here is access to the manual:
http://www.pyramydair.com/p/crosman-760-xls-airsoft-rifle.shtml
Safety cannot be over-emphasized! Treat all guns as loaded when handling around others.
Best wishes.

Dec 14, 2008 | Sport & Outdoor - Others

Not finding what you are looking for?
Crosman (4032) Logo

Related Topics:

1,017 people viewed this question

Ask a Question

Usually answered in minutes!

Top Crosman Optics Experts

Brad Brown

Level 3 Expert

15557 Answers

Anthony Coots
Anthony Coots

Level 1 Expert

6 Answers

raysaw

Level 2 Expert

231 Answers

Are you a Crosman Optic Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...