Question about Canon PIXMA iP1800 InkJet Photo Printer
Pixma IP100 will not recognize new black "35" ink cartridge...light blinkiing endlessly and I really need to print...AAAHHHHHH... Help please. Ryan
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Canon iP100 Portable Printer
On the front of the (printhead)cover is a "hole", with that you can lift the cover .
The printhead will move to the center and you can change a cartridge.
To change the printhead if necessary you can squeez the little gray handles next to the cartridges ( one left of the CLI-36 and one right of the PGI-35) , lift the printhead handle and the printhead can be changed.
Posted on Mar 09, 2009
YOU CAN TRY PULLING THE CARTRIDGE OUT AND WITH A CLEAN , VERY SOFT CLOTH , CLEAN THE HEAD GENTLY ....SOME CARTRIDGES ARE JUST FAULTY ....HAVE YOU TRIED RETURNING IT OR GOING TO CANON SITE AND TROUBLESHOOTING ?
Posted on Jun 02, 2009
SOURCE: PIXMA iP100 portable printer
i'm sending a link so you can find a service location in your area. you have to enter you zip and info i don't have. your going to probably need that part. have a great day and if i can be of more help reply for bama46. remember to rate bama46, thanks http://www.usa.canon.com/consumer/controller?act=ServiceLocatorAct&fcategoryid=257&modelid=16505
Posted on Aug 23, 2009
Go to this page:
Canon iP100 Support
If the Drivers & Downloads tab is not selected, click on it.
Under the Guides and Manuals you can download the Quick Start or Easy Setup guides. When you click on the link it will open (as long as you have Acrobat Reader) and then you can save them to your computer for future use.
On that same page, if you select your operating system from the drop down menu near the top, you will get a list of available software.
You will need the software under Drivers. It ends in exe. Click on the file name. You will then have to accept the EULA. When you do you will get another download window. The best thing to do is to select Save and direct it to your desktop. When the download is complete, close the window.
To install the software:
Make sure the printer has ink and paper. Turn the printer OFF and disconnect the USB cable from the computer.
Run (double-click) the file on your desktop that you downloaded. This will begin the install. When prompted, connect the USB cable to the computer and turn the printer ON. This will continue the software install.
NOTE: Should you get any "Found New Hardware" windows, simply Cancel them out.
That should get you going. Refer to the Easy Setup guide mentioned above for additional info.
Thanks for using Fixya.
Posted on Dec 28, 2009
Tips for a great answer:
Jul 20, 2012 | Canon PIXMA Office Equipment & Supplies
Sep 08, 2008 | Canon Pixma MP500 All-In-One InkJet...
Jan 11, 2008 | Canon PIXMA IP5200 InkJet Photo Printer
Nov 14, 2007 | Office Equipment & Supplies
Jul 08, 2014 | Canon PIXMA iP1800 InkJet Photo Printer
259 people viewed this question
Usually answered in minutes!