Question about Scytek 2000RS Remote Control

1 Answer

The doors lock when I start the car - I don't want that!

I have the Galaxy 2000RS 5 button remote. The doors lock when I start the car (Kia Sportage) It never used to but this winter we had a little problem with -30 degree weather and a dead battery, after that the doors just started locking. How do I get it to stop?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 366 Answers

The unit can be programmed to lock the doors after starting, to make it leave it alone you have to enter the programming(ignition on, press the valet switch 5 times within 5 seconds, the lights will flash 3 times to signal you have entered programming, then press valet switch 10 times(lock after start setting) within 5 seconds hit the unlock button on the remote (button closest to the side with the other buttons)
then turn off the ignition to save the settings and it should be done

manual for the system is found at scytek.net under the download section

Posted on Oct 11, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Start Kia sportage with no alarm button


Usually if you use the key in the door lock to lock unlock the door it will disarm the security system on the car, when you unlock the door it has to be the drivers door, lock the door then unlock the door and hold the key in the unlock position for 2 seconds

Dec 09, 2013 | 1998 Kia Sportage

1 Answer

Need program to add additional key fob to my Python 474P model on a 2005 Kia Sportage


To program additonal remote; open door, turn ignition on. Press and release valet button one time then, press and hold valet button. While holding valet button, press lock button on new remote. Turn ignition off. Test system.

Sep 29, 2012 | Remote Start System

1 Answer

200 Kia Sportage door lock remotes will not work


Did you replace them with the same batteries ? Some people assume all batteries are the same. Some are 3 volts, while others are only 1.5 volts.

Apr 24, 2010 | 2002 Kia Sportage

1 Answer

I have 2007 kia the doorlocks are locking on there own when you open passenger door and make noise plus tpms light is on since my sensor was replaced after I bought new tires


TRY THIS PRESS REMOTE TRANSMITTER LOCK BUTTON ACTIVATES ALARMS AND LOCKS ALL DOORS.NOW PRESS REMOTE TRANSMITTER UNLOCK BUTTON DEACTIVATES ALARM AND UNLOCKS ALL DOORS AND TRUNK LID.IF VECHICLE UNLOCKED AND DOORS OR TAIL GATE NOT OPEN WITH IN 30 SECONDS LOCKS AND ALARM ARE REACTIVATED.IF YOU STILL HAVE TROUBLE WITH DOOR LOCKS THE DEALERSHIP HAS TO FIX.

Feb 15, 2010 | 2001 Kia Sportage

1 Answer

Don't know how it works.


manual for the system can be found at scytek.net

Apr 30, 2009 | Scytek 2000RS Remote Control

1 Answer

Timer in auto start.


if it is the 2000 rs the manual can be downloaded from scytek.net

1. Turn on ignition.
2. Within 5 seconds, press the valet switch 5 times.
· The parking lights will provide three blinks, indicating that you have entered Programming.
3. Press the valet switch 12 times (engine run time)
· The parking lights will flash each time the valet switch is pressed.
4. Within 5 seconds, press the transmitter button corresponding to the desired time ( left button 15 min, right button 25 min)
· The parking lights will flash to indicate the setting.
1 flash = 15 min
2 flashes = 25 min
5. When you are finished, turn off the ignition to save the changes.


all of this is based on that it is the galaxy 2000rs m,

Nov 19, 2008 | Scytek 2000RS-M Remote Control

1 Answer

Dont know how to work it


do not lock doors with facory switch it is setting the factory alarm must shops dont get the factory disarm alarm wire to shut it off.this will always happen use the remote with the remote starter to lock and unlock doors and it should be fine

Mar 28, 2008 | Scytek 2000RS Remote Control

2 Answers

Auto start


did you install yourself and what module did you use for the doorlocks or did you have it installed at a shop

Sep 26, 2007 | Scytek 2000RS Remote Control

Not finding what you are looking for?
Scytek 2000RS Remote Control Logo

251 people viewed this question

Ask a Question

Usually answered in minutes!

Top Scytek Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74459 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Scytek Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...