Question about Washing Machines

3 Answers

Washing machine Hello, we have a Frigidaire Front Load washer and have replace the timer and water pump, but we are still having problems, the machine dispenses the detergent,softner and bleach the minute we put it in the containers and then when we start the machine the timer gets "stuck" after the wash cycle and we have to advance it manually, when the machine finishes the clothes are still very wet. Can you please help us. Sharon and Gene

Posted by on

  • Gammie Sep 14, 2007

    checked that and there is no water leaking anywhere, someone told us we may have bought a defective timer, is that possible?

  • Kenooka Mar 07, 2008

    I have a Frigidaire Gallery series washer. Washer fills with water and agitates fine, but when it comes time to spin the washer stops. I have advanced the knob manually and the spin cycle does work. What do I need to replace?



3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hello, I have a Frigidaire top load washing machine Model FWSC445RFS0.


1. After loading clothes water and everything, the agitator does not work just keep on spinning to the point that water spill all over.
2. I need the step by step procedure on how to remove the agitator.
Please help!

Posted on Jan 06, 2008


Could be looking that way but without actually doing on site function tests on it with a meter you cant always tell, difficult sometimes, it needs the hand on approach, glad to have eliminated something anyway, if there is a wire on the timer in the wrong place, you would need a wire schematic, not for the diy person, sorry cant be of further help????

Posted on Sep 16, 2007

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 209 Answers

Just on the information you have given it sounds at first to be water leaking into the drawer from the solenoids, these could be jammed open slightly, (or one of them), with dirt, with machine switched off, remove the soap drawer and look in and see if any water is flowing in even just a trickle is too much, if so replace the affected solenoid, easy to do? start with that and see how you go on, if i have helped rate me please, thank you

Posted on Sep 14, 2007

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My frigidaire front load washer when you try to start wash cycle the door will lock then unlock. Replaced the lock assembly.

Hello - From what you have described, if both the hoses have been cleaned and the door lock assembly has been replaced, then the unit could possibly be experiencing an issue with the timer, control board not communicating correctly or a faulty pump. In this case I would contact a professional to move forward accurately to properly diagnose and repair the washer.

Nov 07, 2012 | Frigidaire Affinity ATF7000E Front Load...

1 Answer

Frigidaire Affinity Glacier Stackable upright washer. Washer will not agitate and makes a buzzing sound from the pump that extracts water from the drum. Water collects and remains in bottom of washer.


Problems with a washing machine not spinning or not draining are often inter related..

If you are having a problem with your top load washer then check out this tip...

Washing Machine does not Pump or Spin

If you are having problems with your front load washing machine then checkout this tip...

Front Load Washing machine not draining and or not spinning


Aug 29, 2010 | Frigidaire Affinity ATF6000ES 3.5 Cu. Ft....

1 Answer

My frigidaire front load washer will start a wash, complete the first cycle but then stop and flash all the lights and beep continously until I press "start" or "cancel". If I press "start" again it just...

Hello there:
If your cycle does not complete or The cycle doesn't advance
When the cycle should advance, it's probably the timer or a cold-water supply problem: It's the timer, if your washing machine fills with water and begins agitating, but the timer never advances--or if the washer is in a spin cycle and the timer won't advance. Then you need to replace the timer. It may be a cold-water supply problem, if the washing machine fills with water, agitates, drains, and spins, but then doesn't fill with rinse water. than check the cold water supply line and the filter

Aug 15, 2010 | Frigidaire ATF6000ES Front Load Washer

2 Answers

Frigidaire top loader washer won't drain


The timer has went bad in your front load washer.Thats the reason why the unit is not draining properly. If you move the timer manually to spin will it pump the water out? if it works that way then the timer is bad for sure. You should go for a replacement.
Thank you !!

May 31, 2010 | Frigidaire ATF6000ES Front Load Washer

2 Answers

Frigidaire front load washer model LTF2940FEO. As

remove lower kick panel and check for leak at door boot and drain pump.

Apr 23, 2009 | Frigidaire ATF6000ES Front Load Washer

2 Answers

Frigidaire front loader wont final spin timer stops at 7 min.

its_me_ac You probably have a faulty timer switch.
You can buy parts at this site , v
Please give me a good rating

Dec 05, 2008 | Frigidaire ATF6000ES Front Load Washer

1 Answer

Frigidaire front load washing machine won't stop filling

it sounds like your water valve is bad or you pressure switch is bad or hose from pressure switch to tub is cloged

Feb 07, 2008 | Frigidaire ATF6000ES Front Load Washer

4 Answers

Frigidaire front load washer problems

My problem is that water is still draining when it goes to final spin. final spin is not working properly. then machine shuts itself off before timer.

Nov 16, 2007 | Frigidaire GLTR1670A Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

369 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers


Level 3 Expert

77932 Answers

Brad Brown

Level 3 Expert

16806 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides