Question about Kitchen Appliances - Others

1 Answer

Hw do I light the GF-8 countertop deep fryer?

I have a Cecilware GF-8 countertop gas deep fryer. The lighting instructions are worn off of the door of the fryer. How do I light the fryer?

Posted by on

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 125 Answers

Hello. This is what you need, here is a link to a gf-10, it is close enough to get you going. The directions are on page 4, picture of the valve on page 5:

http://www.cecilware.com/docs/N797A%20GF-10%20Manual.pdf

Hope that helped, and thank you.
If you have further problems, "ask me"

Posted on Apr 19, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cecilware fms40 fryer convert to lp gas


Most NatGas devices will convert to use of LP by changing the orifice.

GRINDMASTER CECILWARE F177A ORIFICE 52 1 16 LP GAS

Oct 05, 2015 | Cecilware FMS-40 Deep Fryer

1 Answer

My Cecilware fryer will not fire up, the pilot light is on.Is it likely a thermostat problem?


possible thermo couple problem not letting the gas valve open its the little tube that the pilot flame burns to

Jan 28, 2011 | Cecilware Deep Fryer

1 Answer

Hi I have got a cecilware deep fat fryer


Sounds like you need a gas regulator in the main line.

Either that or you are using a natural gas fryer on propane which is a no-no if not converted properly.

Dec 20, 2010 | Cecilware FMS-40 Deep Fryer

1 Answer

My Cecilware GF-10 LP deep fryer pilot will light, but won't stay lit after waiting the minute or so. Seems like the thermostat for the pilot is not working properly. Any suggestions?


The pilot sensor - a thermocouple or thermopile is probably the problem. They are fairly cheap and available at most hardware stores because they are also used in water heaters and furnaces. There are ways for a professional to check them but if you are going to change it yourself it is a cheap enough part to go ahead and try. Sometimes access can be a bit of a problem. You usually have to remove one or two of the main burners to get to it easier. Just don't try to light it up again until you have put them back in again.

Oct 19, 2010 | Cecilware GF-10 Deep Fryer

1 Answer

My pilot light would come on but i had to press it to position. And when i tried to release it to light up, the fire went out.


Sometimes the thermocouple gets so weak that it may require you to hold in on the pilot knob for a couple of minutes after the pilot is lit. If it still goes out then you need to replace the thermocouple or thermopile, which ever you have.
captrick

Jul 08, 2009 | Cecilware GF-10 Deep Fryer

1 Answer

Commercial Deepfryer


The thermostat for a GF28 is a Cecilware L099A or F. It is not repairable, but any reputable commercial parts place should have it available for around $90 US.

May 02, 2009 | Cecilware GF-28 Deep Fryer

1 Answer

My Cecilware GF-10 LP deep fryer the pilot will not light.


on that cecilware fryer there is a regulator to the right of the pilot light unsrew the aluminum cap and take off cap then you will see a white plastic screw turn that screw clockwise until it stops this will give the fryer more gas this could be your problem the regulator is silver and inline with the gas pipe comming from the back

Nov 21, 2008 | Cecilware GF-10 Deep Fryer

2 Answers

Pilot going out when thermostat turned on


This is caused by the safty bypass feature on the gas valve. You will need to replace the gas valve. This problem is a safty interlock built into the valve when it fails it will not let the main valve portion fire.

Aug 23, 2008 | Kitchen Appliances - Others

1 Answer

Pilot goes out


You definitely need to change the spring in the regulator. May need new pilot thermocouple

Jul 20, 2008 | Cecilware GF-10 Deep Fryer

Not finding what you are looking for?
Kitchen Appliances - Others Logo

Related Topics:

128 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kitchen Appliances - Others Experts

Angel Joseph Jr.
Angel Joseph Jr.

Level 2 Expert

683 Answers

kakima

Level 3 Expert

102366 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Are you a Kitchen Appliances - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...