Question about Philips 43PP9202 43" Rear Projection Television

2 Answers

Phillips 43pp920217 I took my tv to the repair shop because the picture went out and the repair man said that it is the main power board. Is this something that I can fix myself and if so what is the correct name for the part I am needing?

Posted by on

  • trouble5980 Jan 01, 2009

    I have a philips 43pp920217 rear projection tv. It has audio but no picture. It is 5 years old but still a good tv. Is my tv worth fixing? How much would it cost and if it is not worth it what should I do with it I hate to just throw it away.

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Philips Master
  • 3,459 Answers

I have worked on dozens of the DPTVXXX models recently all with audio but no video. In every set the HVG was the problem.

If you are not sure how to find/repair/replace the HVG youself goto http://www.TvRepairKits.com to get their how to guide. 

 Its an easy do-it-yourself fix. 

Also, if you call in a repair tech - they will almost certainly want to sell you a new LSB board for $500.00+. The LSB board is where the HVG is located. Average cost for a replacement HVG is around 140.00 from vancebaldwin, partstore, etc. 

Posted on Jan 11, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,153 Answers

On these sets, if your not experienced with this problem I would not try, but you could get the the part yourself and replace it. Call PTS 1800-844-7871 and ask to speak to a tech and he or she could tell you what you need and how to put it in. I just repaired a 51pp9202h/17 and would not want to do another. It has many boards in it and depending on the problem you could only buy another board and replace. Mine went black, I could hear audio but no picture. Thought it was the convergence board but it was the SSB the one with the Flyback on it. So after replacing almost everything I just bought another and its fixed now. So hope this helps

Posted on Sep 13, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Tv completeley went out , first the picture then sound. took it to a tv repair shop and the power board checks out ok can not find the problem so he is not chargeing me wants me to pick it up


Hi,
On the Vizio LCD TVs there are only two boards: Main board and power board.
There is also the screen. If they checked the power board then all that is left is the main board or screen. If the power light stills changes color when ther power button is pressed you may have a bad screen (costs more than the TV if even available)
If no lights come on the main board can be tried to see if it fixes it, the main board will cost $200-$400.
These screens go bad so I'll bet the shop did not want to try the main board as they can not return it after buying it
Buy a new set is my advice
Hope this helps
thanks
Roety

I’m happy to help further over the phone at https://www.6ya.com/expert/eric_ab7c09ec01841771

Aug 16, 2011 | Vizio 42 in. LCD TV

1 Answer

TV will not turn on... it has power but screen will not turn on


its the main board, tv repair man told me he was asking too much manufacturer too, unless you have warranty go to www.shopjimmy.com and get it and do it your self its simple just becareful with the screen and connect the plugs right its only 4 or 5 main board its incharged all your imputs picture sound

Apr 14, 2010 | Olevia LT42HVi 42 in. LCD Television

1 Answer

Picture and lettering are double and wavy


the DPTV305 - DPTV345 convergence repair kit at the following link should repair that issue. The kit includes the replacement parts and a CD with detailed repair instructions.
http://www.tvrepairworld.com/

Jul 18, 2009 | Televison & Video

1 Answer

Convergence problem ,Help Please


Something is not right here. Is there any possibility that you can get the circuit designation (Rxxx) of the resistors that were "incorrect"? I am not aware of anything like this that can cause the "memory to be erased". The only memory in that area would be the factory convergence settings which can be modified from the service menu. Please try to supply the resistor IDs and I'll check on this.

Thanks,
Dan

Feb 13, 2009 | Panasonic PT-51HX41 51" Rear Projection...

2 Answers

TV WONT WORK


I was lucky to get a tv repair shop that was a Sanyo authorized dealer to talk to me about this issue.
They told me that they had 3 of these tv's in and they said they were all repaired by replacing "3" parts. they are:

the Y SUSTAIN Board - Part # LJ92-01200a
the Y-Upper Buffer Board Part # LJ92-01202a
and
the Y- Lower Buffer Board Part # LJ92-01203a

I am in the same boat. I amd going to rip the back of my tv off and verify the part numbers. I HAVE NOT REPAIRED MINE YET.. so take this for what it is worth. The Repair shop gave me this info because they were going out of business and did not intend to take any new tv's in for service. The girl who gave me this info read it out of the service repair tickets from 3 Sanyo DP42746 tv's that had the same symptoms as my tv.

Please post back if any one has taken action.

Aug 02, 2008 | Sanyo DP42746 42 in. Plasma Television

3 Answers

Phillips 37FD9944/01S Plasma TV - Power Supply


dont waiste your money problem main or logic board or if shure power supply go radio shack and get one with specifications match voltage,ampers,and polarity

Mar 30, 2008 | Philips 60PP9352 60" Rear Projection...

1 Answer

Phillips 42" LCD Mod#42PF722OA/37


This problem is related to two failures, one is the Power Supply Board, another one is the Y-Main Board. Troubleshoot procedures:

1. Disconnect the Vs Power Supply cable from the Power Supply Board,
2. Turn on the tv and check the Vs voltage on Power Supply Board,
3. If the Vs voltage is there, then the Y-Main board failed.
4. If the Vs is not there, then the Power Supply Board failed.

Jan 18, 2008 | Philips 42PF9996 42 in. HD-Ready LCD...

4 Answers

Power light comes on, but no sound or picture


I had the same problem and my tv was out of warranty. I took it to a local repair shop and they told me didn't work on that brand. They said they charge $300 minimum for labor, plus parts. So probably at least $500 to fix. Since I figured we had nothing to lose my buddy and I took it to our shop at work and decided to take it apart and look for any obvious problems such as blown fuses, burned components, etc. All of the printed circuit boards are connected to what appears to be similar to a motherboard via data1.gif ribbons. We disconnected the data ribbon of each PCB to the microprocessor PCB and turned on the TV. Each time it turned back off after about 3 seconds. When we disconnected the Y-Main PCB the TV stayed on and I got the sound back, but no picture. We then disconnected the buffer PCB's from the Y-Main to ensure they were not the problem. Finally, we pulled the fuse on the Y-Main PCB and reconnected the data ribbon and the TV and sound stayed on again. I found a site that sells the Y-Main for $179 and I am deciding whether to try it or not. Any suggestions or comments would be helpful.

Dec 14, 2007 | Sanyo DP42746 42 in. Plasma Television

1 Answer

Repair issues


call the repair shop back to let them know that there is a possible fault and have it notated they must offer some kind of warranty on their repairs/

Sep 10, 2006 | RCA HD52W59 HDTV Projection Television

Not finding what you are looking for?
Philips 43PP9202 43" Rear Projection Television Logo

160 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75774 Answers

matt martin
matt martin

Level 3 Expert

1229 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...