Question about D-Link / RangeBooster N 650 / DIR-635 / 300Mbps / 802.11n / 4-Port / Cable/DSL Wireless Router (DIR635)

1 Answer

I bought a new comp. I am trying to figure out my "key"

I have a dlink 635. I bought a new computer, and am trying to figure out what my "key" is so I can print off of my network capable printer. I looked on 192.068.0.1, typed in my password, but there is no, NO INFO on what the "Key", or WPA passphrase is. This is the forth time I have either purchased, or received a comp, and every time, I have to go through the same thing. I found it last time with the help of a $240,000.00 a year computer friend of mine, he is not available right now however. I am supposed to remember a 46 plus key to log onto a wireless network?!!!! D Link offers no help at all. Help me please. I do not think I will EVER buy another DLINK product again due to thier lack of ANY customer Support with this product.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 58 Answers

"I looked on 192.068.0.1" you may have just had a typo but it's 192.168.0.1

ftp://ftp.dlink.co.uk/dir_products/dir-635/DIR-635_manual_10.pdf

This is a 93 page users manual.
You should download it. Anyway, i'll look up the reset instructions and get back to you.

Posted on Apr 14, 2009

  • 1 more comment 
  • M Nelson
    M Nelson Apr 14, 2009

    1. press and hold ( for a few seconds) the reset button in the back.

    2. logon to the router with dropdown box: choose admin and leave the password blank

    3. click setup and run the security wizard.



    It's cake from there!



    And download the manual...it's a well written, easy to understand manual...unlike many



    Good Luck

  • M Nelson
    M Nelson Apr 14, 2009

    Ask questions if you get stuck.

  • M Nelson
    M Nelson Apr 14, 2009

    Did the manual help?

×

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

mbase213
  • 728 Answers

SOURCE: A couple of days ago I was trying to log onto our

Hi Mike,

First off, I'd reset the router in order to gain access. On the back of the router, you'll find a little hole, that if you take a paper clip and un roll one end, you can use that to push into the hole. Hold the reset button in for 10 seconds. This resets the router back to the manufacturer's defaults. Once that is done, Open up a browser and type in the following IP address in the address line. 192.168.0.1 and the user name is admin, and leave the password blank. This will get you into the router, so you can setup your connection again.

Good Luck and dorn't forget to leave a rating.

Thanks

Mark

Posted on Apr 21, 2009

SOURCE: im trying to setup a new laptop to wireless dlink

Connect your laptop to the router using ethernet cable. Access the router's IP from the browser & get the necessary details.

Posted on Aug 03, 2009

govinda123
  • 2260 Answers

SOURCE: I hooked up my DLink VWR and cannot get internet connectivity

If you connect the computer directly to the modem, does it work?
If that works then the modem is working.
Now connect the computer to the router and the modem to the router.
You will need to open the set up page of the router to check the settings of the router.
You can set up the router without the CD also.
It is very easy.
Click Here for step by step instructions about how to set up the router

Posted on Dec 28, 2009

Geekman
  • 32281 Answers

SOURCE: Dlink DIR 615, network name changed, won't accept password

It appears your brother has changed your wireless router settings.
You can reset the Dlink back to the default settings by -
Power off the Dlink and press and hold the RESET button on the back of the Dlink and the power on the Dlink. Hold the RESET button for 5 secs. until the LEDs flash at the same time.
Connect a LAN cable from the computer to the Dlink. Open a browser and enter the Dlink's configuration URL
http://192.168.0.1
Default login = admin
PW = blank (just press Enter)
You can now change the admin password and set up a new passphrase (ie encryption)
For details on how to secure your wireless from unauthorized access, please click on this link and follow my instructions :-
http://www.fixya.com/support/r3559128-wireless_router_security

Posted on May 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My husband bought a dlink router (it says dgl-4500 on it) and i cant figure out how to use it to get wireless internet for my new laptop....i have three "codes" he wrote down- a "router pass", a "network...


Router password is the password to access the router settings.
SSID is the network name. When you try to connect to the wireless network on your laptop, you will see this network name.
If your network is secured network then it will ask you for the network key or the password. You need to enter the ' security key '.

Click Here for step by step by instructions

Sep 11, 2010 | D-Link DGL-4500 Wireless Router

2 Answers

How can i change the password of my D-link DIR-635 router


To change any settings on the router, you will need to access the router set up.
Do you have any computer connected to the router with the cable?
If not then you will need connect the computer to the router.
open the setup page and change the settings.
Click Here for step by step instruction

Dec 05, 2009 | D-Link / RangeBooster N 650 / DIR-635 /...

1 Answer

How do I intall the dlink router if I dont have a cd drive My computer is a dell inspirion and is runs on vista


hello, here is what you need to do: if have a pc connected to high speed modem directly you will unplug the network cable from the back of your pc/laptop and that end will then go in to "WAN" port on the new dlink router.
second, you take another wire and plug one end in your pc/laptop and the other end in one of the 4 lan ports in the back of your new dlink.
restart everything in the following order at 30 seconds duration:- first the cable/DSl modem, then dlink, then your pc/laptop.
once everything is up open up internet browser and test connectivity.
at this point you should have internet up and running but you need to configure you router and wireless etc.
from your browser in address bar type in http://192.168.0.1 and hit enter that will bring you router login prompt : default user name is "admin" and password is left blank and hit enter, you are now in router to configure options as you please.
I would strongly recommend changing your router password administration and if you plan on using wireless, setup SSID, encryption, network key on wireless. NEVER LEAVE IT OPEN.

Hope this helps
let me know if you have any questions

Amar Sondhi

Dec 04, 2009 | D-Link / RangeBooster N 650 / DIR-635 /...

1 Answer

Cant connect old comp to new router


go to > control panel >network connections > in left hand pane.under Network Tasks..click..Create A New Connection... that will start a wizard and will guide you thru the process. you will also need to install the drivers as well for his computer to be able to use the modem/router.
i hope this has helped

Sep 09, 2009 | HP Pavilion a330n (Refurbished)...

1 Answer

Vista printer driver for a Xerox Workcentre Pro 635


try this....
http://www.xpvistasite.com/workcentre_pro_635_12490.htm

Jan 04, 2009 | Xerox WorkCentre Pro 635 Laser Printer

1 Answer

LOST REGISTRATION KEY FOR SYSTEM SUITE 8


contact the company and explain your problem

Dec 28, 2008 | Avanquest System Suite 8: Windows

1 Answer

Keep getting Firmware upgrade screen when connecting to router


You have get the saoftware upgraded otherwise it's bit difficult to install it on your comp..
But still there is one way which you can try first shut down your comp...
then once it's off then start your comp and just when press on swotch hold down the F8 key on your keyboard umtil it takes you to a new screen that says safe mode at the top in that screen you'll find an option that says safe mode with networking select it through arrows keys on your keyboard and press enter...it willk take you back to your normal desktop and then try config the router with ipaddress again if it works then perfect otherwise contact dlink to get the upgrade...

Feb 20, 2008 | D-Link AirPlus DI-614+ Wireless Router

2 Answers

Vista OS can't connect wireless to Dlink DI-614+ rounter


yes it does but what exactly is this it's your comp that's not connecting to your wireless network..so here try these steps...
first click start>click in start search>in that box type in services>it gives you an option of services on the same start menu at the top click on that...
it will take you to a new screen that says services at the top on that screen you need to scroll down at the bottom and look for wlan auto configuration rt click on it and click start if start is greyed out press restart....
close services down..
click start>click connect to form the start menu> and check it gives your network name in there .if it says anything like no network found in range. pls make sure that wireless switch on your laptop is turned on...
if still you're not able to connectr it's a concern with the drivers of wireless adapter on your comp genrally on new comps its quite common get the drivers reinstalled....

Feb 18, 2008 | D-Link AirPlus DI-614+ Wireless Router

6 Answers

D-link DIR-635 router


Hi, I am assuming that you can connect to your router's web based interface (192.168.0.1). On a PC LAN wired to the router, open a browser; Type "192.168.0.1"; Log-in username/admin and password/(blank); Go to Tools > Misc and the option to select the WAN speed (bottom); Lock the speed down on the WAN port of your router to 10Mbps (Some versions do not have this feature). Hope this works for you. If not pls post back with your modem brand/model. You may also want to log the IP settings (IP Add, Subnet Mask, Default Gateway, DNS Servers) of the PC that is directly connected to the modem when you can access the Internet when not using the router. Good luck and kind regards.

Oct 02, 2007 | D-Link / RangeBooster N 650 / DIR-635 /...

Not finding what you are looking for?
Computers & Internet Logo

248 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18387 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...