Question about Polaroid FLM-3732 Television

1 Answer

No picture and wont turn off

When i turn on the tv: no picture and wont turn off
i unpluged and plug the tv and still get the same problem.

Posted by on

  • 2 more comments 
  • 3scouters Apr 15, 2009

    I had the same problem using the tv as a computer monitor. Once I turned off the computer and the signal went off I had a blank screen on the tv and it became unresponsive to the remote. Wouldn't turn off or anything. I hoped the processor was locked up somehow so I shut the power off to the tv- waited a while and then turned the power back on. Now no-response at all. Dead. No little red light nada. Fuse is fine in back. I fear the power supply is dead and it's only 2 years old!

  • Goochos Apr 20, 2009

    I now have the same problem and also same age. 2 days ago I replaced the 2 capacitors as mentioned. It worked for 1 day, then it locked up. I couldnt turn it off ,so I unplugged it. Now it wont power up again, and no red standby light. Arghhhhhhhhhh. Polaroid blows.

  • patricia_379 Apr 21, 2009

    I have the problem of plugginh and unplugging for a few weeks. Now the blue light blinks rapidly and dulls out, old remedy not working anymore. I'm going to give the capacitor change out a try I hope it works for me.

  • 3scouters May 11, 2010

    Rats - that won't work for me - I have no lights on front. Once I unplugged it and plugged again - nothing. No lights, just dead $900 worth of dead! Curses to Polaroid!

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I have the same problem. If there are some lights on the front that work you can use this fix (http://www.fixya.com/support/r741402-polaroid_flm_373b_lcd_tv_black_screen), but if you don't have any lights on the front, I haven't figured it out yet. I'm hoping someone will find the answer sooner or later.

Posted on Apr 25, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Direct Tv mini caused my Insignia tv to freeze and now tv wont turn back on


The direct mini did not freeze the tv. It's a coincidence. Your TV needs repair. Unfortunately insignia tvs have a reputation for problems like this.

Aug 13, 2016 | Insignia Televison & Video

1 Answer

Why does my sharp tv 32k-x1000 picture turn offand wont come back on unless i unplug it then replug in outlet


Main system control memory IC fault. Replace it.
If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

Jul 28, 2014 | Sharp 32K-X1000 TV

1 Answer

My toshiba tv wont turn on


FIRST GREEN LIGHT WOULD COME ON. TOOK IT AWHILE BUT ITWOULD FINALLY TURN ON...NO NOTHING. IT'S GETTING SPARK CAUSE WHEN I PLUG AND UNPLUG IT AT THE SOURCE OF ENERGY IT SPARKS. FUSE IS NOT BLOWN

Feb 13, 2012 | RCA F27450 27" TV

1 Answer

I dont have a remote for my tv and it wont turn on manually the led light blinks 9 times and stops and starts again what should i do?


The blinking lights are a service code. You should first try to unplug your TV and leave it unplugged for at least 4 hours... then plug it back in again.

If the blinking light is still there and no picture, time to have the TV serviced. Good luck!

Oct 10, 2010 | Panasonic CT-34WX54 34" TV

1 Answer

I have the power cord dvd cords and cable cords plugged in and there is no picture the tv wont turn on it should turn on but it wont it wont even show that its off


Have you verified #1 that your outlet is putting out 120 VAC? Have to checked input power fuse inside chasis? What about a stuck power on switch? Unplug all access. except the TV and try powering it on.

Jul 31, 2009 | Dell W3000 30 in. HD-Ready LCD Television

2 Answers

No pic or sound


First unplug set and let set for several minutes the plug in and turn on. Could be in a serv mode.

Jul 13, 2009 | Hitachi 51F59 51" HDTV Projection...

1 Answer

When i unplug my tv and plug it back it wont turn on, and after many tries of plugging and unplugging sometimes it turns on


Do you have a wall switch on that receptacle , maybe , just maybe, somebody is playing games with ya ...lol...

Oct 12, 2008 | Panasonic PT-53WX54 53" Rear Projection...

7 Answers

Samsung HCN4226WX/XAA Rear Projection 42" TV Wont Turn On


take off the back there is a board at the top right with two black stk-392-040 chips on it unplug the red connector at the left side of the board then plug set up and see if it comes on if so the chips on the board are bad or replace the board about $100.00

Aug 02, 2007 | Samsung HCN4226W 42" Rear Projection...

1 Answer

TV wont turn on?


this product has a bunch of exotic semiconductors that only a tech could replace in my parleyance its called NECO

Dec 08, 2006 | RCA 27R410T 27" TV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Polaroid Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74468 Answers

matt martin
matt martin

Level 3 Expert

1213 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a Polaroid Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...