Question about 3Com OfficeConnect (3CRWE454G75) 802.11b/g Wireless Access Point

1 Answer

CISCO 2800 router interface stop responding

HI, i have a network with 5 computer connected via a small DLINK switch to a cisco 2800 router (maintained by the provider FASTWEB). All work correctly. After i have installed this access point after 10 minutes the router stop responding and internet become unavailable. The wireless network syill working. If i reboot the router all work for othe 15/20 minutes and then the problem reappear. Any suggestion. Thank you

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 62 Answers
Re: CISCO 2800 router interface stop responding

What kind of cable do you have connected from the DLINK to the Router? Is it an ethernet cable 3,5e,6?

Posted on Sep 15, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Can get router to work

The Cisco Aironet 1200 access point provides secure wireless connection to your network. Cisco's wireless access design meet the needs of a small to medium size business.

This unit provides secure network access for laptops or Wi-Fi capable portable devices, which you upgrade at any time as your business grows.

A beneficial feature of the Cisco Aironet 1200 is its ability for the administrator to reset the access point remotely.

This resetting process works through your internet browser.
Log on to the System Configuration page by entering your Cisco Airnet 1200 IP address in your browsers web address text box.

Enter your user and password information from the pop up menu.
Click on the "Setup" button from the summary status page.

Select the "Cisco Services" setup option and click on "Manage System Configuration."
Click on "Reset All System Factory Defaults" to reset the router.

The Cisco Aironet 1200 will be restored to factory defaults. Aironet 1200 Series

Configaration Cisco Aironet 1200 Series - wp1016665

May 07, 2014 | Linksys Cisco Aironet 1200 Wireless Access...


Cisco Wireless, Access to Information and Resources in Wireless Networks

Cisco wireless solutions ensure that your business is able to react to the constant demands of the fast moving global economy. And the Cisco Unified Wireless Network helps enable the Borderless Mobility Experience with a broad portfolio of products that provide anywhere, anytime access to information with the same quality of experience provided by a wired network.<br /><br />For every Cisco fans, they are familiar with all the <a href="">Cisco wireless products</a>, such as <a href="">Access Point</a>, Client Adapters and Client Software, Antennas, Wireless LAN Controller, Wireless Integrated Switches and Routers, Wireless LAN Management, Outdoor Wireless, Mobile Wireless, Service Control for Mobile Networks, Wireless IP Telephony, etc. <br /><br />Firstly, let's get some questions that were asked by people who used Cisco wireless products<br />"I need drivers, and help on how to set up a Cisco Wireless Adapter? I have a Cisco Aironet 802.11a/b/g Wireless CardBus Adapter that I am unsure on how to set up. I can't find drivers for it on the cisco website, or anywhere on the web. If anyone could link me to the drivers and tell me how to set it up that would be great!"<br /><br />"How do I enable the wireless in a Cisco Aironet access point? This is 1200 series Cisco systems AP which is shipped with the wireless disabled, I have only laptop at my disposal. I have tried to communicate with it using it's supplied ethernet cable but either my laptop does not see it or it does not respond. I have the small hand book that comes with it so I do know all the default settings."<br /><br />"Where can I get coupons for Linksys by Cisco Wireless-N Broadband Router? Where can I find a discount online for Linksys by Cisco Wireless-N Broadband Router?"<br />...<br /><br />No matter what Cisco wireless products you have, many people will be confused with how to use it. So we can learn some basic features of Cisco wireless items to help you know it well.<br /><br />Take Cisco Wireless Access Point as a typical example, Cisco Aironet access points and bridges connect wireless devices to networks, providing ubiquitous network access for indoor and outdoor environments. Cisco's next-generation wireless solutions offer comprehensive wireless coverage with up to nine times the throughput of 802.11a/b/g networks. Cisco enterprise wireless mesh helps enable cost-effective, scalable deployment of highly secure indoor and outdoor wireless LANs.<br /><br />Overview on some popular Cisco wireless Products<br />Cisco Aironet 1250 Series Wireless Access Points built on a robust modular platform designed for easy field upgrades, facilitating support of a variety of wireless capabilities<br />including data rates of 300Mbps per radio while providing reliable and predictable WLAN coverage.<br /> <br /><br />Cisco Aironet 1140 Series Draft N Access Points give six times the performance of 802.11a/g networks for reliable connections to Wi-Fi voice, streaming video, and business applications. Cisco Aironet 1140 Series indoor access points have a sleek design that blends into enterprise environments, and they can be powered with standard 802.3af Power over Ethernet.<br /> <br /><br /><a href="">Cisco Wireless LAN Controllers</a> (Standalone and Modules), simplify the deployment and operation of wireless networks, ensuring smooth performance, enhanced security, and maximum network availability. Cisco wireless LAN controllers communicate with Cisco Aironet access points over any Layer 2 or Layer 3 infrastructure and support 802.11a/b/g and the IEEE 802.11n draft 2.0 standard.<br /> <br /><br />Notes: More info such as price, purchasing info, feature details and specs of Cisco wireless products you can visit<span>Cisco Wireless</span>, or go to Cisco's official site see more wireless solutions and services. <br />

on Jul 19, 2011 | Wireless Access Points

1 Answer

When I enable the vlan option in an EAP9550 I lose wireless access


Is the goal to use a different VLAN for each access point (AP)? If so then you will need to configure each NetGear port to use the same VLAN as the AP that is connected to it. You will then need either a switched virtual interface (SVI) for each VLAN on the NetGear or a trunk port (802.1q) from the NetGear to the Cisco. I'm not sure the NetGear will support SVIs but it will support trunks. An SVI basically creates a gateway for each VLAN's subnet. For example, let's say AP1 uses VLAN 10 and the subnet is while AP2 uses VLAN 20 with a subnet. The NetGear will need 2 SVIs, one for each VLAN/subnet. The first SVI for VLAN 10 can be configured with IP address while the second SVI can be configured with for VLAN 20. These IP addresses will be the gateway for each VLAN. Finally, the NetGear would need to act as a router and route each VLAN's subnet to the Cisco device. Once again I don't believe the FS726TP supports this.

The other solution would be to create a VLAN trunk port between the NetGear and the Cisco device but I believe the Cisco RV042 does not support trunking. If it does the trunk would be configured to carry all of the VLANs to the Cisco device which would then have SVIs created on it.

If neither of the above is possible you would need to use the same VLAN for each AP and each of the interfaces on the NetGear and Cisco devices which negates the need for the VLANs.

I hope this helps.

Mar 13, 2014 | EnGenius Wireless Access Points

1 Answer

My Cisco aironet 1141N-ke9 showing red blinking continuously and stuck in that .Now only access via console.Can any one solve it

Sounds like the network connection to the AP is shot. Try a different cable, different port on the switch, or repower the device.

Aug 05, 2012 | Aironet Air-ap1141n-a-k9 Cisco 1140 Series...

2 Answers

How to reset to factory default?

Hi nbergma,

To Factory reset your router you need to locate the Reset Button at the back of the router. The Reset Button is the small hole at the back and you need a Pen or a Paperclip to press it. Press and hold the reset button for 10-15 seconds. Make sure that the router is on when you reset it.

Thanks for using Fixya.

Jan 28, 2011 | Cisco (AIR-BR1310G-A-K9) 802.11g/b

1 Answer

I have a Cisco router, series 1800, How can I block sites with this router, can you help me?

You need to create an Access Control List (ACL )
Fist of all you need to get the router to carry out DNS lookup so in config you need to add
Router(config)# ip name-server
Router(config)# access-list 101 deny tcp any host eq www Translating ""...domain server ( [OK] Router(config)# access-list 101 permit tcp any any eq www ! to allow all other web trafficRouter
Hope this helps

Dec 10, 2010 | Cisco 1800/2800/3800 Series - 802.11b/g...

1 Answer

Reset cisco airnet 1130ag

There are 2 ways to reset the access point.

Using the MODE Button

Follow these steps to delete the current configuration and return all access point settings to the factory defaults by using the MODE button:

1. blank.gifOpen the access point cover

2. blank.gifDisconnect power from the access point (the power jack for external power or the Ethernet cable for in-line power).

3. blank.gifPress and hold the MODE button while you reconnect power to the access point.

4. blank.gifContinue pressing the MODE button until the Ethernet LED turns amber. (approximately 2 to 3 seconds). Then release the button.

5. blank.gifAfter the access point reboots, you must reconfigure it using the web browser interface, the Telnet interface, or the access point console port.
Using the Web Browser Interface

Follow these steps to delete the current configuration and return all access point settings to factory defaults using the web browser interface:

1. blank.gifOpen your Internet browser. You must use Microsoft Explorer (version 5.x or later) or Netscape Navigator (version 4.x or later).

2. blank.gifEnter the access point IP address in the browser address line, and press Enter. An Enter Network Password screen appears.

3. blank.gifEnter the username Cisco in the User Name field.

4. blank.gifEnter the password Cisco in the Password field and press Enter. The Summary Status page appears.

5. blank.gifClick System Software. The System Software screen appears.

6. blank.gifClick System Configuration. The System Configuration screen appears.

7. blank.gifClick the Reset to Defaults button.

Note blank.gifIf the access point is configured with a static IP address, the IP address does not change.

8. blank.gifAfter the access point reboots, you must reconfigure it.

Aug 13, 2010 | Cisco Aironet 1131AG 802.11a, 802.11g/b...

1 Answer

Configure cisco aironet wifi

if ur using IOS autonomous AP, then u'll need to configure the bvi interface to get an ip address and then enable the interface. once it has an ip, u'll need to configure the ssid, vlan, etc - choices include doing so with the CLI or web page GUI. U'll need to enable the built-in web server then u can access it via the web interface to setup the ssid, any vlans, radius, etc. good luck.

Jan 17, 2008 | Cisco Aironet 1131AG 802.11a, 802.11g/b...

1 Answer

Switch install help

Sorry about your Admin.  With Cisco this is NOT an easy task.  Did the admin have ANY documentation on the network?  Do you have VLAN's? The IP's are set by the Admin after he figures out what is next in line for the configuration HE setup.  If its setup DHCP, that means a server will figure the IP for you, but for that to work it has to already be setup across your network.  Go into the cisco router already setup and see whats going on there.  To get in you will need passwords probably 4 if setup in a typical Cisco manner. go to this link it will help you get started:
be careful what you undo, you can bring down part or all the network or the internet connections.
now you know why cisco people get payed the big bucks...good luck to you

Oct 12, 2007 | Wireless Access Points

Not finding what you are looking for?
3Com OfficeConnect  (3CRWE454G75) 802.11b/g Wireless Access Point Logo

Related Topics:

220 people viewed this question

Ask a Question

Usually answered in minutes!

Top 3Com Wireless Access Points Experts

Donna Sander

Level 2 Expert

193 Answers

 C. Dante
C. Dante

Level 3 Expert

623 Answers

Prashant  Sharma
Prashant Sharma

Level 3 Expert

1127 Answers

Are you a 3Com Wireless Access Point Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides