Question about Canon Laserbase MF6530 All-In-One Printer

2 Answers

DOWNLOADING STANDBY

THE ELECTRIC FLASHED AND NOW THE CANNON MF6530 COPIER DOES NOT WORK AND KEEPS SHOWING THE MESSAGE "DOWNLOADING STANDBY"

Posted by on

  • NitrusInc
    NitrusInc May 11, 2010

    Has the printer been power-cycled?

    Disconnect the power source and leave the device in the on position for 5-10 minutes.

    Let us know
    Good luck.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My printer is showing download standby I don't know what to do

Posted on Apr 22, 2013

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 3 Answers

  • Unplug machine.
  • Press 1, then 9.
  • Plug machine back in.
  • Press 1, then 9 (again).
Machine should then initialize and be ready for service.

Posted on Jun 01, 2009

  • CommDev Jun 01, 2009


    • Unplug machine.

    • Press 1, then 9.

    • Plug machine back in.

    • Press 1, then 9 (again).

    Machine should then initialize and be ready for service.

×

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

moh_h86
  • 1 Answer

SOURCE: error message ir2016 download standby

Error message ir2016 download standby

Posted on May 05, 2009

  • 161 Answers

SOURCE: We have a Cannon Copier imageRUNNER 5065 and it

scanner home position error. the scanning lamp does not move or dirty sensor.

Posted on Nov 22, 2009

  • 2 Answers

SOURCE: Canon MF6530 display says Download Standy

OK here is the deal: Either you can fix it easily by yourself or you can't. The manufacturer's suggestion is that you first turn power switch off. Then unplug the machine and wait for 5 minutes. Then plug it in and power it on. If that doesn't work try it a couple of more times and hopefully the machine will reset itself. There are variations of this method on line that incoude pressing a series of buttons in a certain order while the machine is powered off, but these are little more than electronic voodoo. If the manufacturer's recommendations fail it means that one of your circuit boards is gone and needs replacement. The good news is that if you saved your sales receipt and it's less than 3 years old, it's all covered under warranty. Happy Trails.

Posted on Jan 30, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Canon imageclass download standby


You have to reinstall the firmware of the machine. You need a special service tool program

Aug 18, 2014 | Canon imageCLASS MF6530 Monochrome Laser...

1 Answer

LCD displays "download standby" and does not respond to any key entry


try to reset the unit. this will erase the previous settings you have made..

Oct 19, 2008 | Canon imageCLASS MF6530 Monochrome Laser...

1 Answer

Canon mf6530 shows "download connected."


Hello,
you will need a service suport tool to rewrite the software on this machine.
It is necesary to contact a CANON tech to perform this operation, if you try to do it yourself you might damage it more.

Jun 06, 2011 | Canon imageCLASS MF6530 Monochrome Laser...

1 Answer

I do not have the manual specific to the MF6530. I have the general manual 6500. I have cleaned where it showed to clean, but I still have a black smudge mark down my pages. Can you please help?


Hi there,

You can download the model specific manual and maybe this has a different method of cleaning, hope this helps you. Here is the manual free of charge: Cannon MF6530

Thank you for using FixYa! Have a nice day and please remember to rate this solution.

Warm regards,
BearWeb

Aug 18, 2010 | Office Equipment & Supplies

2 Answers

Canon MF6530 display says Download Standy


OK here is the deal: Either you can fix it easily by yourself or you can't. The manufacturer's suggestion is that you first turn power switch off. Then unplug the machine and wait for 5 minutes. Then plug it in and power it on. If that doesn't work try it a couple of more times and hopefully the machine will reset itself. There are variations of this method on line that incoude pressing a series of buttons in a certain order while the machine is powered off, but these are little more than electronic voodoo. If the manufacturer's recommendations fail it means that one of your circuit boards is gone and needs replacement. The good news is that if you saved your sales receipt and it's less than 3 years old, it's all covered under warranty. Happy Trails.

Jun 09, 2010 | Canon imageCLASS MF6530 Monochrome Laser...

1 Answer

My Canon MF6530 keeps flashing "clean platen glass" even though I've cleaned it several times. How do I correct?


Hi,

You have to take out the glass platten, clean it on both sides.

Then clean the top of the contact sensor (scanner) lightly with alcohol.

Good luck

Oct 21, 2009 | Canon imageCLASS MF6530 Monochrome Laser...

1 Answer

CANON COPIER IMAGECLASS MF6500


It needs a new image processor, hope its still under warranty. The part retail is around $400.00 I just ordered one for someone today!

Jun 15, 2009 | Canon imageCLASS MF6530 Monochrome Laser...

1 Answer

Canon mf 6530 doesn't work at all


well..that's weird...can you do a test page, with the printer disconnected from the computer?


Aug 19, 2008 | Canon imageCLASS MF6530 Monochrome Laser...

1 Answer

We are trying to hook up our cannon mf6530 coppier this computer. the computer is an hp pavilion with windows vista. Purchased yesterday.


make sure the the driver for your cannon copier is vista compatible or support vista. if not call cannon and ask for the right driver

Jun 19, 2008 | HP Computers & Internet

Not finding what you are looking for?
Canon Laserbase MF6530 All-In-One Printer Logo

Related Topics:

803 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1973 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...