Question about Gateway Wireless-B Router (wbr-100)

1 Answer

Ip configuration i've got dsl connection but i need to put my ip address and dns server into ip configuration setting.. the same dsl connection my friend got at home and his dsl modem do not need to configure everytime when he re install his windows. but i do. could any one please tell me the solution

Posted by on

  • Anonymous Apr 19, 2009

    The same, i was apply to configure first, but later i could not make any access using 196.168.1.1

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 30 Answers

Does your friend and yours IP settings the same?To clarify you would have 2 types of connection from your ISP.The 1st type of connection is that the authentication happens in the modem through the PPPOE UN/PW and the IP configurations are done in the modem and as such wont require to configure the IP settings when the windows is reinstalled.However the 2nd type of DSL service is that the IP settings are done in the windows and does not require any PPPOE username and password to authenticate.You would have to verify with your ISP which type of service you have and if you require any change order to make it the same way your friend has.

Please let me know any clarification you would require for this issue.

Posted on Apr 20, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Find proxy server address


Changing TCP/IP settings Win 7 TCP/IP defines how your computer communicates with other computers.
To make it easier to manage TCP/IP settings, we recommend using automated Dynamic Host Configuration Protocol (DHCP). DHCP automatically assigns Internet Protocol (IP) addresses to the computers on your network, if your network supports it. If you use DHCP, then you don't have to change your TCP/IP settings if you move your computer to another location, and DHCP doesn't require you to manually configure TCP/IP settings, such as Domain Name System (DNS) and Windows Internet Name Service (WINS). To enable DHCP or change other TCP/IP settings, follow these steps:
  1. Open Network Connections by clicking the Start button 4f6cbd09-148c-4dd8-b1f2-48f232a2fd33_818.jpg, and then clicking Control Panel. In the search box, typeadapter, and then, under Network and Sharing Center, click View network connections.
  2. Right-click the connection that you want to change, and then click Properties. 18abb370-ac1e-4b6b-b663-e028a75bf05b_48.jpg If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
  3. Click the Networking tab. Under This connection uses the following items, click either Internet Protocol Version 4 (TCP/IPv4) or Internet Protocol Version 6 (TCP/IPv6), and then click Properties. 25e7e385-9327-4f7d-aab0-afa5aaf952ba_49.jpgThe Network Connection Properties dialog box
  4. To specify IPv4 IP address settings, do one of the following:
    • To get IP settings automatically using DHCP, click Obtain an IP address automatically, and then click OK.
    • To specify an IP address, click Use the following IP address, and then, in the IP address, Subnet mask, and Default gateway boxes, type the IP address settings.
  5. To specify IPv6 IP address settings, do one of the following:
    • To get IP settings automatically using DHCP, click Obtain an IPv6 address automatically, and then click OK.
    • To specify an IP address, click Use the following IPv6 address, and then, in the IPv6 address, Subnet prefix length, and Default gateway boxes, type the IP address settings.
  6. To specify DNS server address settings, do one of the following:
    • To get a DNS server address automatically using DHCP, click Obtain DNS server address automatically, and then click OK.
    • To specify a DNS server address, click Use the following DNS server addresses, and then, in the Preferred DNS server and Alternate DNS server boxes, type the addresses of the primary and secondary DNS servers.
    f598cd96-6bf9-47be-942d-7d0b0afdbd88_47.jpgThe Internet Protocol Version 4 (TCP/IPv4)Properties dialog box
  7. To change advanced DNS, WINS, and IP settings, click Advanced.

Mar 10, 2014 | Dell Latitude D600 Notebook

1 Answer

How to change the server aol to my google chrome on start up


Dynamic host configuration protocol (DHCP) is a way to configure IP addresses and TCP/IP settings throughout your network.

The DHCP service is run on a machine with a static IP address so that the computers on the network can find it for automated configurations.

Setting the IP address on a Windows 2003 server is accomplished through the network configuration settings in Control Panel.

Click the Windows "Start" button and select "Control Panel." Double-click "Network Connections." In this section, double-click "LAN Connection."

This opens the configuration tool to set the IP address of the server.

Select "TCP/IP" from the list of configured network applications and click the "Properties" button. This opens a new configuration window.

Select "Use the following IP address" to set a static IP for the server.
Enter the IP address chosen for the server in the first textbox that is activated.

Enter the subnet mask and default gateway for the server.
The default gateway is usually the router on the local network or the DSL or cable modem on a small, home network.

Enter the DNS server address.
The DNS servers are separate servers on the network.

For small, home networks, the DNS server is provided by your service provider.

Click the "Ok" button to save the settings. Click "Ok" again at the general LAN properties window.

Renew settings on local computers. Computers that use the DHCP server for configuration need to be rebooted.

You can also use the DOS command prompt to renew settings.
The "ipconfig -renew" command refreshes the settings on client computers on the network.

or for home page browser

Create the menu tab on your homepage right click in the top toolbar you should see a number of toolbar options select the menu tab which will add File Edit View Favorites Tools and Help

Click on the tools at the bottom of the drop down list will be internet options or
Click start control panel internet options you will see a home page box To Create Page Tabs type

each adress on its own line (type in google.com) or your preferred home page and browser
below that will be change search defaults click on settings you will see all search Providers
Toolbar extensions and Accelerators you have

have if dont need any of them you can disable or remove them


Click start type cmd press enter you will be in DOS mode
type in ipconfig press enter
you will see all of your internet connection details



Hope this helps

Dec 29, 2012 | Google Chrome

1 Answer

Can't connect to router interface 192.168.1.1


Took another look by fixing word wrapping in notepad.

It's missing DNS Servers. Check your NIC settings and make sure you don't have a DNS server manually set to another IP. Plus, you might try resetting the router to default in case there is a DNS modification there.

I'm not sure if this is the cause, but I couldn't hurt. It's part of trouble shooting.

Good Luck!
JD

Oct 02, 2012 | Computers & Internet

1 Answer

Hi all\r\n Newbie to servers, ive been given an computer with server 2003 loaded on it it has been through the first stage setup and now im with a few things, mainly when i run the email and internet...


DNS-servers translate names, such as 'www.fixya.com' to IP-addresses, because routing of IP-packets on the Internet is done using the IP-addresses, not by using the names of each computer.

If you have a router between your computers and your cable-modem (or DSL-modem), then the router can automatically supply the "Primary DNS Server" and "Secondary DNS Server" and "IP Address" to your server computer, if you configure the network-adapter on the server to "automatically obtain an IP Address".

As long as you leave your server running, the "dynamic" IP-address that it obtains will, in effect, become a "static" (namely "non-changing") IP-address.

Feb 03, 2011 | Microsoft Windows Small Business Server...

1 Answer

Newbie to servers, ive been given an computer with server 2003 loaded on it it has been through the first stage setup and now im with a few things, mainly when i run the email and internet connection...


DNS-servers translate names, such as 'www.fixya.com' to IP-addresses, because routing of IP-packets on the Internet is done using the IP-addresses, not by using the names of each computer.

If you have a router between your computers and your cable-modem (or DSL-modem), then the router can automatically supply the "Primary DNS Server" and "Secondary DNS Server" and "IP Address" to your server computer, if you configure the network-adapter on the server to "automatically obtain an IP Address".

As long as you leave your server running, the "dynamic" IP-address that it obtains will, in effect, become a "static" (namely "non-changing") IP-address.

Feb 03, 2011 | Computers & Internet

1 Answer

No Internet access


make sure you can access the router configuration page

change you computer ip addess to match the ip address range of the router

ex if router is 192.168.1.1
set computer ip to 192.168.1.2
subnetmask 255.255.255.0

and set default gateway and dns server address to gataway address

geateway 192.168.1.1
dns server 192.168.1.1

try it most probably you need to make sure you have configured your adsl user name and password and other settings in you router since you have rested it




Apr 11, 2010 | D-Link ADSL2/2+ Modem/Wireless Router...

1 Answer

Oops this link appears to be broken dns error - cannot find server windows 7 explorer 8


The error refers to the Domain Name Server (DNS) that your system uses is unable to translate the Uniform Resource Locator (URL, web address either Typed in the address line or linked using a hyper-link, favorite or default home page) (In english, the translation of a web address link www.google.com to the Internet Protocol (IP) address that computers actually use to show the page)
Possible causes:
  1. The URL is wrong. (Typed wrong, link no longer active, link changed)
  2. The DNS server listed for your ISP configuration is not working.
  3. The web site is offline.
  4. The DNS server settings for your internet configuration are wrong.
Possible resolutions:
  1. Try a different Web Address, see if it works
  2. Restart (Completely power off your Cable/DSL modem and then do the same with your router)
  3. Check you IP address configuration settings and ensure that auto-assign DNS is selected (Default setting)
  4. Boot to safe mode with networking, see if you can get online that way.

Dec 21, 2009 | Computers & Internet

2 Answers

I cannot communicate with primary dns server 172.29.71.1 is there a way i can reset it automaticaly or manually


You cam try doing a power cycle. Turn off the modem, router (if you have one) and your computer. after 1 minute turn on modem first then router and computer. If you still can't communicate or ping the DNS it could be a firewall that is blocking it.

Oct 08, 2008 | Computers & Internet

2 Answers

Wan indicator does not light up..


Hi there

Getting Started

Setting up a Wireless Infrastructure Network
8bd3361.jpg
Please remember that D-Link AirPlus G wireless devices are pre-configured to connect together, right out of the box, with their default settings.For a typical wireless setup at home (as shown above), please do the following:
1) You will need broadband Internet access (a Cable or DSL-subscriber line into
your home or office)
2) Consult with your Cable or DSL provider for proper installation of the modem
3) Connect the Cable or DSL modem to the DI-524 Wireless Broadband Router
(see the printed Quick Installation Guide included with your router.)
4) If you are connecting a desktop computer to your network, install the D-Link AirPlus G DWL-G510 wireless PCI adapter into an available PCI slot on your desktop computer. You may also install the DWL-G520, or the DWL-520. (See the printed Quick Installation Guide included with the network adapter.)
5) Install the D-Link DWL-G630 wireless Cardbus adapter into a laptop computer.
(See the printed Quick Installation Guide included with the DWL-G630.)
6) Install the D-Link DFE-530TX+ adapter into a desktop computer. The four Ethernet LAN ports of the DI-524 are Auto MDI/MDIX and will work with both Straight-Through and Cross-Over cable. (See the printed Quick Installation Guide included with the DFE-530TX+.)

Using the Configuration Menu

Whenever you want to configure your network or the
DI-524, you can access the Configuration Menu by
opening the web-browser and typing in the IP Address
of the DI-524. The DI-524 default IP Address is shown
bellow:
-Open the web browser
-Type in the IP Address of
the Router (http://192.168.0.1)
cf4c550.jpg
Note: if you have changed the default IP Address assigned
to the DI-524, make sure to enter the correct IP Address.

-Type admin in the User
Name field
-Leave the Password blank
-Click OK
22e0166.jpg

The Home>Wizard screen will appear. Please refer to the Quick Installation Guide for more information regarding the Setup Wizard.

Home > Wizard
1255162.jpg

These buttons appear on most of the configuration screens in this section. Please click on the appropriate button at the bottom of each screen after you have made a configuration change.
066a66b.jpg


Home > Wireless
08740e2.jpg

SSID- Service Set Identifier (SSID) is the name designated for a specific wireless local area network (WLAN). The SSID’s factory default setting is default. The SSID can be easily changed to connect to an existing wireless network or to establish a new wireless network.

Channel- 6 is the default channel. All devices on the network must share the same channel. (Note: The wireless adapters will automatically scan and match the wireless setting.)

WEP- Wired Equivalent Privacy (WEP) is a wireless security protocol for Wireless Local Area Networks (WLAN). WEP provides security by encrypting the data that is sent over the WLAN. Select Enabled or Disabled. Disabled is the default setting. (Note: If you enable encryption on the DI-524 make sure to also enable encryption on all the wireless clients or wireless connection will not be established.)

WEP Encryption- Select the level of encryption desired: 64-bit, or 128-bit

Key Type- Select HEX or ASCII

Keys 1-4- Input up to 4 WEP keys; select the one you wish to use.

Home > WAN > Dynamic IP Address
94836c8.jpg

Host Name- The Host Name is optional but may be required by some ISPs. The default host name is the device name of the Router and may be changed.

MAC Address- The default MAC Address is set to the WAN’s physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP.

Clone MAC Address- The default MAC address is set to the WAN’s physical interface MAC address on the Broadband Router. You can use the “Clone MAC Address” button to copy the MAC address of the Ethernet Card installed by your ISP and replace the WAN MAC address with the MAC address of the router. It is not recommended that you change the default MAC address unless required by your ISP.


Home > WAN > Static IP Address
eb48373.jpg
Static IP Address- IP Address-

Subnet Mask- ISP

Gateway Address- Primary

DNS Address- Secondary

DNS Address- Choose Static IP Address if all WAN IP information is provided to you by your ISP. You will need to enter in the IP address, subnet mask, gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the fields must be in the appropriate IP form, which are four octets separated by a dot (x.x.x.x). The Router will not accept the IP address if it is not in this format.

IP Address- Input the public IP Address provided by your ISP.

Subnet Mask- Input your Subnet mask. (All devices in the network must have the same subnet mask.)

ISP Gateway Address- Input the public IP address of the ISP to which you are connecting.

Primary DNS Address- Input the primary DNS (Domain Name Server) IP address provided by your ISP.

Secondary DNS Address- This is optional.

Home > WAN > PPPoE
683d185.jpg
*** Please be sure to remove any existing PPPoE client software installed on your computers.

Choose PPPoE (Point to Point Protocol over Ethernet) if your ISP uses a PPPoE connection. Your ISP will provide you with a username and password. This option is typically used for DSL services. Select Dynamic PPPoE to obtain an IP address automatically for your PPPoE connection. Select Static PPPoE to use a static IP address for your PPPoeE connection.

PPPoE- Choose this option if your ISP uses PPPoE. (Most DSL users will select this option.)

Dynamic PPPoE- receive an IP Address automatically from your ISP.

Static PPPoE-you have an assigned (static) IP Address.

User Name- Your PPPoE username provided by your ISP.

Retype Password- Re-enter the PPPoE password

Service Name- Enter the Service Name provided by your ISP (optional).

IP Address- This option is only available for Static PPPoE. Enter the static IP Address for the PPPoE connection.

Primary DNS Address- Primary DNS IP address provided by our ISP

Secondary DNS Address- This option is only available for Static PPPoE. Enter the static IP Address for the PPPoE connection.

Maximum Idle Time- Enter a maximum idle time during which Internet connection is maintained during inactivity. To diable this feature, enable Autoreconnect.

MTU- Maximum Transmission Unit-1492 is the default setting-you may need to change the MTU for optimal performance with your specific ISP.

Auto-reconnect- If enabled, the DI-524 will automatically connect to your ISP after your system is restarted or if the PPPoE connection is dropped.

Home > LAN
4a9c31e.jpg
LAN is short for Local Area Network. This is considered your internal network. These are the IP settings of the LAN interface for the DI-524. These settings may be referred to as Private settings. You may change the LAN IP address if needed. The LAN IP address is private to your internal network and cannot be seen on the Internet.

IP Address- The IP address of the LAN interface. The default IP address is: 192.168.0.1.

Subnet Mask- The subnet mask of the LAN interface. The default subnet mask is 255.255.255.0.

Local Domain- This field is optional. Enter in the local domain name.

Home > DHCP
8d32e58.jpg

DHCP stands for Dynamic Host Control Protocol. The DI-524 has a built-in DHCP server.
The DHCP Server will automatically assign an IP address to the computers on the LAN/
private network. Be sure to set your computers to be DHCP clients by setting their TCP/
IP settings to “Obtain an IP Address Automatically.” When you turn your computers on,
they will automatically load the proper TCP/IP settings provided by the DI-524. The
DHCP Server will automatically allocate an unused IP address from the IP address pool
to the requesting computer. You must specify the starting and ending address of the IP
address pool.

DHCP Server- Select Enabled or Disabled. The default setting is Enabled.
Starting
IP Address- The starting IP address for the DHCP server’s IP assignment
Ending
IP Address- The ending IP address for the DHCP server’s IP assignment
Lease Time- The length of time for the IP lease. Enter the Lease time. The
default setting is one hour

Advanced > Virtual Server
58de0f2.jpg

If you would like to view more of this manual CLICK HERE

Thank you for using FixYa. Have a nice day and please remember to give this solution a good rating.

Jun 28, 2008 | D-Link AirPlus DI-524 Wireless Router

1 Answer

Lanier LD 024c


You need to check the DNS server. Press user tools, system settings, interface settings. This screen will display IP address settings. There is a DNS selection. Put the Ip address for the DNS in there. (obtain by, Windows desktop screen, Start, run, type cmd in the input box, enter, at the prompt, type ipconfig /all. it will bring up your settings. write down the DNS setting.)

Now, your SMTP server setting can be obtained by going into your Email account settings. There will be a spot for servers. If you are using Microsoft exchange server, you can use the server name or its IP address. Otherwise, it will be your ISP email server setting. You can just call your ISP and get the outgoing server name. Once obtained, go into user tools. system settings, file transfer and plug in into the SMTP option. I think if I'm not mistaken, there is a connection test there as well. (The 024 might be too old to have that) That should do it. You may need to enter in a email name and password for athentication.

If you have any problems, you can call the Lanier help desk too. 800-424-1573

Apr 14, 2008 | Office Equipment & Supplies

Not finding what you are looking for?
Gateway Wireless-B Router (wbr-100) Logo

Related Topics:

95 people viewed this question

Ask a Question

Usually answered in minutes!

Top Gateway Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18409 Answers

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Are you a Gateway Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...