Question about Computers & Internet

1 Answer

CANT OMMIT ZONE

I NEED TO SET THE ALARM DURING THE NIGHT HOW DO I OMMIT A ZONE

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 53 Answers

I don't know how this question got classified under Windows Desktop PCs, but it sounds to me like it's about a home burglar alarm system.

The feature you're looking for is typically referred to as "stay" or "bypass." "Stay" is used to automatically disable detection on preconfigured interior zones, such as motion detectors or photobeams so you can walk around inside your home without setting off the alarm. "Bypass" is used to disable detection on any individual zones you desire (except fire detection devices such as smoke detectors, heat detectors, and pull stations).

Every alarm systems works a little differently, but if you could get back to us with make and model, we could provide specific directions.

Also see our Website at MaverickSolutions.biz/solutions_sec.htm if you'd like more information about professional upgrades, changes, or reconfiguration of your alarm system.

Posted on Aug 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Toyota alarm


wiring or module damaged in collision -- not detected during repair- need t check out wiring in door(s) and to module and the security module.

Apr 01, 2014 | 2007 Toyota Corolla

2 Answers

Need a user manual for skyscan model 31420e atom travel clock


Late to the party I guess. Lots of entries for setting the clock, but not for the alarm. Press the plus or minus button. That's it. After you have the time set, you can then press the ALARM button above the WAVE/SET button to turn it on.

May 06, 2012 | Audio Players & Recorders

1 Answer

I need help setting the alarm on my radio controlled digital clock.


1- Turn over your Seth Thomas digital clock. Use your finger to remove the cover to the unit's battery compartment. Insert two AA-size alkaline batteries into the battery compartment and replace the cover. Certain Seth Thomas digital clock units will also have an optional alternate power source in the form of a standard AC power cable that plugs into a wall outlet in your home.

  • 2 Place your Seth Thomas solar-powered digital clock in front of a light source, such as on a window sill or beneath a lamp. The black strip on the top of the unit is the solar sensor, so as long as light is shining down on that strip, your clock will be powered on and ready to use. The sensor stores energy throughout the day so that it can work at night with no direct light contact on the sensor.

  • 3 Press the time zone button that indicates your current time zone. These buttons are located on the back of the unit. For example, if you are in the eastern time zone select the "EST" button. Turn the unit back over. It will now be displaying the correct time on its digital screen.

  • 4 Use the "Alarm" switch (if applicable) to enable and disable the clock's alarm. Press the "Alarm" button, followed by the "Hour" and "Minute" buttons, to set the appropriate alarm time based on your needs. Use the "Alarm HI LO" switch to set the volume for the alarm.

  • 5 Press the "Weather" button to tune your Seth Thomas digital clock to its built-in local weather radio station (if applicable). Certain Seth Thomas clocks have this radio weather functionality built in, while others don't. If yours does, the aforementioned "Weather" button will be located on the front of the unit.
  • May 28, 2011 | Seth Thomas Radio-Controlled Howard Wall...

    1 Answer

    I dropped my battery operated alarm clock: the second hand still works but the alarm doesn't come on at the set time and the hour & minute hands don't "hold" their position - I took the clear...


    The hour and minute hands can be pushed onto their respective shafts at any point in most clocks.
    If you already know the time that the alarm is set, let the clock run until it sounds.
    When the alarm sounds, install the hour hand and the minute hand to the exact alarm set time. If, say, the alarm is set for 6:30, push the hour hand onto it's shaft at exactly half way between 6 and 7 and then push the minute hand onto it's shaft pointing at exactly 6.
    I think this should get you operating.
    Gary

    Jan 16, 2011 | Vacuums

    1 Answer

    AI can't figure out how to set the atomic clock


    This clock will set it's self in a 24 hour time frame. You need only set the time zone your in.

    If it does not correct it;s self change walls and location in your house.

    The transmitter is located in Fort Collins, Colorado. this station transmits the time codes and is best received at night.

    Hope this tip helps.

    R/
    David

    Feb 13, 2010 | SkyScan 86709 Atomic Wall Clock

    1 Answer

    Replaced batteries= how to set clock -time, etc/


    • Twist and lift open the battery compartment cover at the back of the clock and insert 1 fresh AA, LR6 1.5 volt ALKALINE battery according to the polarity marked on the case.
    • Press time zone button to select a time zone.
    • Replace the battery compartment cover.
    THAT’S IT! During the night your clock will automatically set itself.

    It will do it itself just need to wait thats all

    Apr 21, 2008 | La Crosse Radio Controlled Atomic Clock

    6 Answers

    Honeywell RC182WB Atomic Alarm Clock with Temperature--stuck on pacific time!!!


    I KNOW HOW TO FIX IT!

    Take off the battery cover, and take the batts out, leaving the outside thermometer working...

    You will have to reset everything but it automatically detects your time zone!

    I just did it literally 2 minutes ago!

    Nov 23, 2007 | Honeywell RC182WR Atomic Alarm Clock - Red

    5 Answers

    Timex T301B


    Petewete,
    Here is the manual.
    http://www.timexaudio.com/pdf/T301IBOnline57204_83.pdf

    Frank081541,
    You can't adjust the Daylight Savings Time. I called Timex and they confirmed this.

    Mar 06, 2007 | Timex Auto-Set Dual Alarm Digital Clock...

    Not finding what you are looking for?
    Computers & Internet Logo

    Related Topics:

    108 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Computers & Internet Experts

    Doctor PC
    Doctor PC

    Level 3 Expert

    7733 Answers

    kakima

    Level 3 Expert

    102366 Answers

    David Payne
    David Payne

    Level 3 Expert

    14161 Answers

    Are you a Computer and Internet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...