Question about Hotpoint Aquarius WF000 Front Load Washer

1 Answer

Good Spin but cloths still damp Hotpoint WF541p

We have the above model that will work as normal but when spinning has finished, still leaves clothes wet (very heavy but not dripping) Some water is still left inda machine.

Also mould and conditoner left in draw so I took it to bits (ex engineer) and cleaned all holes etc till it shone but it is still leaving conditioner in draw.

HELP!

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 297 Answers

Water left is not spinning enoug or textile type or overloading.
program can't handle during operating time timer.
you took out that syphon cap on the compartment and cleanend under. further watersupply under suspicion, blockage.
And after a fe years you get a lot of textile reidue built up outside ofthe drum. Have you cleaned outlet filter thorough?

Posted on Apr 19, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Clothes too damp after spin cycle


Front loading washers are notorious for not spinning the water out of a small load of clothes. This is because there is not enough clothes in the washer to balance the tub during the spin cycle.

Try washing a slightly larger load with a minimum of six items or more. This is one of the downsides to front load models and no specific brand is immune to the problem.

Mar 17, 2013 | Washing Machines

1 Answer

The spin cycle on my washing machine is not working, the clothes are still wet when the cycle is finished


Make sure that the clothes are not too heavy ( jeans and sweats ), and put in the machine evenly. If the machine is off balance, it won't spin fast enough to wring out the clothes.

Oct 14, 2010 | Hotpoint Washing Machines

2 Answers

Spin not working properly, sounds ok but clothes are too wet once complete and the independent spin cycle leaves clothes soaking!!!


Sounds like a small blockage in the outlet pipes, possibly just in the filter but check all outlet pipes. Just done one the other day and it was a clothes button that had passed out of the machine through the pump to the outlet pipe but had turned sideways inside the outlet pipe.

Jan 25, 2010 | Hotpoint Aquarius WMA56 Front Load Washer

1 Answer

My bosch front loading washer on the small cycles will not spin the water out of the clothes..why?


Does it sound like the machine is spinning as fast as on longer cycles?Some machines run a slower spin speed on small cycles which can leave clothes wetter than normal. I've got this on mine and all I do is when the wash has finished I change over to the fast spin only program which then takes it to it's highest spin speed.

Jan 25, 2010 | Bosch Washing Machines

1 Answer

My zanussi washing machine fj1033 finishes normal wash progam but doesnt go into hihg spin therefore clothes are wet rather than damp.if i turn dial to spin cycle only it works that way.please advise.


If you have not already done so, then check and clean the pump filter, this is usually located at the bottom right front of washer, behind a drop down cover or flap.
Unscrew anti-clockwise to remove and clean.

Jan 08, 2010 | Washing Machines

1 Answer

My Hotpoint Aqualtis washing machine leaves


the drain **** in the machine is partially clogged. my best guess is at the water pump. your washer needs to be serviced. call a serviceman..

Nov 15, 2009 | Washing Machines

1 Answer

Model 110 washer will not go into a final high speed spin.


hi, i would suggest the timer/programmer is faultyas it is ok on the other cycles, the noises you have described may have caused some damage,

Feb 10, 2009 | Washing Machines

1 Answer

Washer spin cycle


Dear Friend,
ngfam1 here for you!
I am happy to be of assistance!

If it's reduced from hoe it used to do it, then you must call service before there is any more damage.
Some washers can leave the clothes damp or slightly wet but not dripping!!!!!!!!!! Thats a malfunction!!


Here is a good service that I recommend to my customers,
in our 65 year old appliance business!

A&E Factory Service
1-800-905-9505 -(IN U.S.A.)
They are open to make appointments 7days/24hours
A&E is factory authorized service for most brands!
Including warranty work!!!
They will help you, and all will be well!

Good luck!
You will be fine now!

Thank You
Bless you,ngfam1
PS. Please give me a good rating here in fixya.com before you sign out!

Jul 22, 2008 | Admiral AW22 Top Load Washer

Not finding what you are looking for?
Hotpoint Aquarius WF000 Front Load Washer Logo

144 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

Todd Arndt
Todd Arndt

Level 3 Expert

2044 Answers

freddyfox

Level 2 Expert

236 Answers

ptpumpman

Level 3 Expert

407 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...