Question about Car Audio & Video

2 Answers

Need wireing diagram for instalation

Need instalation wireing diagram for kenwood model kac 801

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 655 Answers

Hello bulldogwjm,

You can download the Kenwood manual here:

http://www.kenwoodusa.com/Support/Car_Entertainment_Owners_Manuals/#_

Just select the model number from the dropdown and download it.

Hope this helps.

Posted on Apr 14, 2009

  • -BiffX- May 03, 2011

    I'm going to assume you meant RCA inputs, so u can get a sig to the amp. Well i have 2 of these amps and ripped em apart to find how to wire them up.

    i know this is a real old thread but i know there is going to be others wanting to use these old good powerful amps. So here we go...

    First off u need to cut off the din plug.
    There are lots of other wires inside that big black wire.

    The first braided copper wire on the outside is a ground that goes to the chassis of the amp inside. I don't use it. Use the black ground wire comming out the amp.

    Now look for a red wire. This is your ACC power. This is power that comes on when you turn your key forward.

    There is a brown wire. When the amp is on this wire puts out 0.35 volts. I'm not sher what this wire is. i don't use it. My KAC-801 s work great with out them hooked up, so tape that wire up so it doesn't short out.

    There is a big white wire inside that has 3 wires inside of it.

    There is a bare wire inside that white wire, this is a common sound signal ground. Use this on the outside of the RCA plugs for both rite and left rca common sound sig ground.

    The white wire inside the white wire is the left positive sound signal. U can run this to the center of an RCA connector as your positive RCA sound sig.

    Then there is a yellow wire inside the white wire is the right positive sound signal. U can run this to the center of an RCA connector as your positive RCA sound sig.

    These are your right and left sound inputs done now.

    Now for your power. Big red is your main power. have this powered all the time, Use a fused line.

    Big black is your ground. ground to your chassis.

    then your 2 speaker wires. these are +red, grey and -grey for right, and +blue and -grey for right.

    Enjoy!

×

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

I'm going to assume you meant RCA inputs, so u can get a sig to the amp. Well i have 2 of these amps and ripped em apart to find how to wire them up. i know this is a real old thread but i know there is going to be others wanting to use these old good powerful amps. So here we go... First off u need to cut off the din plug. There are lots of other wires inside that big black wire. The first braided copper wire on the outside is a ground that goes to the chassis of the amp inside. I don't use it. Use the black ground wire comming out the amp. Now look for a red wire. This is your ACC power. This is power that comes on when you turn your key forward. There is a brown wire. When the amp is on this wire puts out 0.35 volts. I'm not sher what this wire is. i don't use it. My KAC-801 s work great with out them hooked up, so tape that wire up so it doesn't short out. There is a big white wire inside that has 3 wires inside of it. There is a bare wire inside that white wire, this is a common sound signal ground. Use this on the outside of the RCA plugs for both rite and left rca common sound sig ground. The white wire inside the white wire is the left positive sound signal. U can run this to the center of an RCA connector as your positive RCA sound sig. Then there is a yellow wire inside the white wire is the right positive sound signal. U can run this to the center of an RCA connector as your positive RCA sound sig. These are your right and left sound inputs done now. Now for your power. Big red is your main power. have this powered all the time, Use a fused line. Big black is your ground. ground to your chassis. then your 2 speaker wires. these are +red, grey and -grey for right, and +blue and -grey for right. Enjoy!

Posted on May 05, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need Wiring diagram for Kenwood amp #KAC-501


Installation instructions begin on page 9 of the manual.

Oct 16, 2012 | Kenwood Car Audio & Video

2 Answers

I have an old kenwood kac-801. It doesn't have rca outputs. i have an output adapter but the wire colors are different. i need the scematics or someones help


take one of your door speakers and check the wireing on the speaker and hook up your wires to those wires on your raido

May 12, 2010 | Car Audio & Video

1 Answer

Wiring diagram kac-646 .Would like to make sure wire connects are wright


www.retrevo.com/s/Kenwood-KAC-646-Amps-review-manual/id/479bh244/t/1-2 check out this website and click on the download manual button. hope this is what you are needing

May 10, 2010 | Car Audio & Video

1 Answer

I've been given an Alpine CDA 7864 and a Kenwood KAC-716 and need install manuals


go to walmart and get the cd player adapter for your model and year of your car mach the wires there color coated and as for the amp you will need a wiring kit you can get it at walmart too then that will come with the wires are the directions to hook it up

Apr 03, 2010 | Kenwood Car Audio & Video

1 Answer

Need wiring diagram for KAC-529S Does anyone know where to acquire one?


Hello gnawb06,

You can download the owners manual here.

Hope this helps. If it does, please rate as "Fixya".

Jul 26, 2009 | Kenwood KAC-529S Car Audio Amplifier

1 Answer

No wiring diagram for amp


+ red power to battery
- black negative cable to body/ground
rem blue remote wire that connects to blue wire
on the back of your cd deck

Jul 05, 2009 | Kenwood KAC-7203 Car Amp

2 Answers

Wiring for kac-622 car audio amplifier


http://www.retrevo.com/support/Kenwood-KAC-622-Amps-manual/id/479bh233/t/2/

Jun 12, 2009 | Kenwood KAC-749S Car Audio Amplifier

1 Answer

Wiring Diagram


First, try looking here: http://www.crutchfield.com/learningcenter/car/amplifiers_movie.html If that helps, be sure to leave feedback or I don't get paid. Look all over the cruchfield page and you can find guides for every type of installation.

Sep 20, 2007 | Kenwood KAC-749S Car Audio Amplifier

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

167 people viewed this question

Ask a Question

Usually answered in minutes!

Top Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4869 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

yadayada
yadayada

Level 3 Expert

76682 Answers

Are you a Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...