Question about UPS Battery Backup Systems
Go to Start then Run then Enter clipbrd.exe this will give you the clipboard viewer. In case you did not know Clipboard is the place where temporary data is being stored. It is based on your systems memory. Once you turn off your PC it will automatically remove all its contents.
Posted on Sep 13, 2007
Ok, a combination of hitting keys CTRL (control) and "C" at the same time will make Windows Copy the most recently selected word text or graphics. Then using the combo of CTRL and "V" would paste that into another program. Try this...open Notepad and type the word COPY. Now select that word with mouse drag and then use key combo of CTRL_C. Now open Wordpad (or another notepad) and then use CTRL-V and the word COPY was now pasted into the other program. So the retrieve is the CTRL V combo.
Posted on Sep 13, 2007
Tips for a great answer:
Jun 04, 2013 | APC Back-UPS Pro 650 UPS System
Dec 05, 2007 | UPS Battery Backup Systems
Pins 5 & 6 - Any-Mode Shutdown
1. Pin 6 of the 9-pin communication connector is used for "Any-Mode Shutdown"
of the UPS output. This control input may be used in special applications
to disable the UPS output power-both Inverter and Bypass.
2. The Options tab allows the behavior of the Any-Mode Shutdown feature to
be modified. When the program opens, or the REFRESH button is pressed,
the UPS setting is read by the configuration program and displayed.
Pin 6 Logic
If version 1.6 (or later) is used with an earlier Liebert GXT2U model (with an
earlier UPS firmware version), the Any-Mode Shutdown features cannot be
If the configuration program is used with an earlier UPS model (with an
earlier UPS firmware version) that does not support the modification of these
settings, the Options tab will display a reminder of the factory default
settings. These cannot be changed.
Note that when this option is selected and the UPS output is
disabled using Pin 6, the UPS output can turn on automatically
and without warning if the Pin 6 connection is changed.
DO NOT CHANGE THIS OPTION from the factory default
setting unless you are ready to install a normally-closed
connection between Pins 5 & 6. This connection must be
maintained to use the UPS or to use the configuration program
again, including the ability to change the UPS setting back to the
default setting using the configuration
Sep 05, 2011 | Liebert GXT2-10000R230 (GXT2-10000R230)...
Mar 04, 2010 | UPS Battery Backup Systems
May 30, 2009 | Dell UPS Battery Backup Systems
Apr 15, 2009 | UPS Battery Backup Systems
Aug 19, 2008 | UPS Battery Backup Systems
Jun 04, 2008 | UPS Battery Backup Systems
Jan 09, 2008 | UPS Battery Backup Systems
Jan 07, 2008 | UPS Battery Backup Systems
111 people viewed this question
Usually answered in minutes!