Question about Televison & Video

1 Answer

I have an old, jvc 20 inch, c2010 model tv without the remote and I am unable to place channel on 4 so it will be compatible with my digital comcast cable box. Any suggestions?

Posted by on

  • Anonymous Apr 14, 2009

    Thanks tviceman, however, this model doesn't give me the option of manually chaning the channels. I can switch from channels to antena/cable, but the channels don't start at the beginning. They got to 3,6,10,12,17,29 & 57 (Phila free stations.) When I select cable-it goes to channel 3, 86, 88, 117 and so on. In Delaware and Maryland, the channel needs to be on channel 4. Once I turn on my comcast digital cable, I can use my comcast remote to select channels, as long as the tv is set on 4. Some tv's have a switch in the back allowing the option of switching the channel from 3 to 4.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 159 Answers

I hope you are able to get into the menu with the front panel.

when you are in the menu you want to be able to make the auto-programing feature works. The cable box has to be already installed and working. when the tv programming crosses the channel 4 and there is a signal there, pretty sure is going to look it. This is the easiest.
The other solution is the menu sometimes allows you to make programming manual. in manual you are able to search channels one by one and allow it in the memory or not, basically then go to manual programming scroll up or down to find the channel four and use enter (sometimes right arrow in order to change the chanel number from red to green) to record in memory this channel. Once again I hope helps you.

Posted on Apr 14, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Help. I got a used TruTech t200d for my nine year old. we were able to hook up and play on playstation 2, but are unable to get the tv to pick up the comcast channels. we do not have the trutech remote...


U able to go into the tv Menu?Yes,goto SETUP changes Pick CABLE and scan for channels for the Comcast CABLE channels.Or Try website like Remotes.com to buy an original tv remote.

Mar 04, 2011 | TruTech T2000D TV

1 Answer

Need code for Audiovox LCD TV (Model LCD1900W) for COMCAST DTA


If none of the the codes work try following these steps:

1.manually turn on the t.v.
2.press and hold the setup button.
3. press and release the tv button the light will blink once and then stay on.
4.press the channel button repeatedly up to 300 times until the device changes channels. the light will blink and then stay lit.
5. press and release the mute button to store the code the light will go off

Aug 28, 2009 | Televison & Video

1 Answer

How can you tell if the remote sensor on a tv is broken?


First you need to check if your remote is working. You can use a digital camera to do so. First place new brand batteries in your remote and then look at the signal diode (the small transparent bulb thingy at the top of your remote). If you press the buttons on your remote you should see the diode flash. If not then there are one or more bad components on you printed circuit board or probably open circuits.

Aug 17, 2009 | Philips Magnavox Learning Universal Remote

2 Answers

Suddenly SNOW on all channels


your tuner has failed;
time for another set the cost to repair is too high

May 29, 2009 | Televison & Video

1 Answer

Unable to watch other channels while taping in progress


You need to have a set with 2 tuners to do this. please rate!

Apr 08, 2009 | Panasonic PV-C2010 20 in. TV/VCR Combo

2 Answers

I lost my remote control for my tv/vhs panasonic omnivision


how do you access the menu without the remote panasonic omnivision tv vcr combo

Mar 31, 2009 | Panasonic PV-C2010 20 in. TV/VCR Combo

1 Answer

Help


you'll need to bring up the menu, under "channels" or "set-up" you will find something called autotune (or manual channel set-up). it will automatically set the channels you pick up.

May 28, 2008 | Philips Magnavox 20MC4304 20 in....

1 Answer

Tv is locked


I have a Quasar Model AM 51760221 WP 3915YW 13 inch TV made in 1985. I am using cable and none of the codes work published by Comcast work to make the TV work with my black box. They are unable to help at Comcast. I did get an updated remote from them, but still unable to turn off the TV to use the remote/black box.

May 19, 2008 | JVC AV-27430 27" TV

1 Answer

Need set up code for universal Comcast controller


I had to buy the Sony Rm-AX1400 and it learned the codes from the old remote. I found it at Bestbuy for 20 bucks. Look on ebay for one.

Mike

Jan 05, 2008 | Niko OTP-3211W 32 in. LCD Television

2 Answers

Jumbo Universal Remote


I have a Motorola DVR from Comcast. Code 051 will make all the cable functions work. Haven't figured out how to do anything with the DVR bits,

Dec 26, 2007 | Universal Remote Control NspireGear MP3...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

249 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74459 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...