Question about MiniDisc Players

1 Answer

JWIN cd player model: JX-CD790

After putting in CD and pushing play...the cd turns for a few seconds then displays 'ER' message. I have changed CD's, batteries, ckeaned lens and cd. what is the problem.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 22 Answers
Re: jWIN cd player model: JX-CD790 - MiniDisc Players

U need to get ur lens replaced

Posted on Nov 17, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

2 Answers

Cd gets stuck in recorder makes clicking sound..

I would just guess that the belt that is in the eject mechanism is now stretched- That is if there is a belt. That is very common in all CD player units.

Feb 12, 2015 | Tascam Dp-02cf Digital 8-track Recorder

1 Answer

After i record and play the cd on another player i have turn volume up

You probably need to adjust your recording volume on the recorder and not just copy the source as it is...

Mar 21, 2014 | Tascam Cd-rw900sl Cd Recorder/player

1 Answer

Pma writing on tha display

After you record the machine then writes to the blank CD. This is message is usually displayed while this is going on. In some machines you need to push another button as the recorder is holding asking for you to confirm the next step (my Pioneer CD Recorder does this yours may not follow the same protocol).

Feb 05, 2014 | Tascam Cd-rw900sl Cd Recorder/player

1 Answer

I have a JVC XU-301 BK...When i play MD i get some static disturbance in my audio out put..however when i play Audio CD it workd fine and out put is cleare

I'd suggest you get a MD head cleaner or give the MD head a blast of comporessed air, also check your MDs. If someone gave you a dirty MD the disc can have dust in the case which does exactly what you are talking about.

If you get the MD head cleaner use it sparingly or it will wear the head out (MD cleaners come in sets of two one for the upper head the second for the lower head). You can find them on eBay.

Jan 12, 2014 | JVC XU-301BK 3-CD/1-Minidisc...

1 Answer

No display plays cd

seems there is a problem with your displays power feed or the display itself is down. let check voltage first by service

Aug 26, 2013 | Tascam Cd-rw900sl Cd Recorder/player

1 Answer

My sony cd player plays most discs but not all? Why?

I have several CD players and I've found some CDs will just not play on some of them. If you have a changer with 300+ discs they are more likely to be fussy than one loaded in a flat tray.

I'd suggest you try playing the CD in another CD player or your computer, if it won't play in them it is the disk. I had one which would not play in any machine, it was a copy I made on a poor quality closeout of blank CDs at Good Guys when they closed, it turned out the blank CDs were of poor quality.

I hope that might help you.

Apr 21, 2012 | Sony MiniDisc Players

1 Answer

I have a problem to finalize cd after recording

On my CD recorder when it enters the finalize mode it first writes the PMA, after that mine gives a readout of the time it will take to finalize, after all that you need to hit the play button to write to the disk.

I don't have your exact unit but I supect you need to push an additional button to get it to start writing to the disc to complete the process.

Feb 27, 2012 | Tascam Cd-rw900sl Cd Recorder/player

2 Answers

If I want to record let's say someone speaking for 90 min and burn 2 cd's , one 60min and the other 30 min from the one 90min recording , each one divided into tracks , how would I do this ?

If you want to burn a CD you have to make a master. For 2 cd's you have to make 2 masters, one for each recording.
The best way to handle this is to "create a song" for each speech giver and give each a name.This is because you can make only one master copy of a song before burning a Cd.

But another way is to :
1. Make a master of the first speech giver (who is on one track) and record to the Cd.
2. Make a new master of the second speech giver (on the other track) and record to Cd.
As long as you don't mind, the second mastering will overwrite the first one that you did, but then you already have burned a copy of that Cd!

Nov 02, 2010 | Tascam Dp-02cf Digital 8-track Recorder

1 Answer

Kenwood MD plays ok but recordings fail to play; U TOC error?

Without a decent Table Of Contents, your MiniDisc will NOT work, as you've found out. Does it matter what brand of MD you use? I would record it at "1X" and NOT 4x speed too. Try erasing a blank minidisc first and then shut off the unit and then turn it back on and see if the TOC works. Try adding a title, then turn it off and back on. Then try the CD to MD.

Jan 16, 2010 | MiniDisc Players

1 Answer



the possible trouble of your unit is the optical laser lens. once the lens cannot read to the disc it will automatically turn off, or maybe your disc are damage...


Sep 07, 2008 | Sony MiniDisc Players

Not finding what you are looking for?
MiniDisc Players Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top MiniDisc Players Experts


Level 2 Expert

473 Answers

Ben Armstrong

Level 2 Expert

332 Answers

xxxxxx xxx

Level 3 Expert

4679 Answers

Are you a MiniDisc Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides